[{"data":1,"prerenderedAt":2708},["ShallowReactive",2],{"\u002Faddons\u002Fbedsplit":3,"\u002Faddons\u002Fbedsplit-guides":420,"\u002Faddons\u002Fbedsplit-docs":1079},{"id":4,"title":5,"blender":6,"body":7,"buy":397,"description":401,"extension":402,"lite":403,"meta":405,"name":406,"navigation":407,"path":408,"poster":409,"price":410,"problem":411,"rawbody":412,"seo":413,"status":414,"stem":415,"updated":416,"version":417,"video":418,"__hash__":419},"addons\u002Faddons\u002Fbedsplit.md","BedSplit Blender add-on: split to bed size","4.2 and newer",{"type":8,"value":9,"toc":384},"minimark",[10,15,19,23,31,81,90,97,101,104,180,186,190,196,200,203,280,284,295,299,317,321,328,332,340],[11,12,14],"h2",{"id":13},"the-problem","The problem",[16,17,18],"p",{},"You have a helmet, a statue, a piece of terrain or an AI-generated figure, and it is larger than your printer bed. A 220 mm bed does not care that the model looks great on screen. You need to cut it, keep every part inside the build volume, and make sure the parts line up when you glue them. Doing that by hand means placing planes, running booleans, fixing the holes the booleans leave, modelling pins and sockets, and rotating every piece so it lies flat. For a model that needs six or eight parts, that is an evening.",[11,20,22],{"id":21},"what-bedsplit-does","What BedSplit does",[16,24,25,26,30],{},"BedSplit is a Blender add-on with one sidebar tab. You pick a printer, press ",[27,28,29],"strong",{},"Split to Bed",", and it does the rest:",[32,33,34,41,51,57,63,69,75],"ul",{},[35,36,37,40],"li",{},[27,38,39],{},"Fits the bed."," It counts how many slabs each axis needs for the printer's width, depth and height, and places flat cuts along X, Y and Z. Positions are nudged away from spots where the cross-section is too small to hold a dowel.",[35,42,43,46,47,50],{},[27,44,45],{},"Cut planes you can move."," ",[27,48,49],{},"Find Cuts"," shows the planes in the viewport. You can change any position in millimetres, add a cut on X, Y or Z, or remove one, then split. This is how you keep a cut off a face or a hand.",[35,52,53,56],{},[27,54,55],{},"Dowel sockets."," Every joint gets round sockets in both faces, plus one dowel mesh to print as many times as the name says. You set diameter, depth, clearance and the number of dowels per joint.",[35,58,59,62],{},[27,60,61],{},"Mesh repair first."," Holes, flipped normals, loose geometry, overlapping shells and non-manifold edges are fixed before cutting. The result panel tells you what was repaired and warns when the surface had to be rebuilt.",[35,64,65,68],{},[27,66,67],{},"Parts laid flat."," Each part is turned so its largest cut face sits on the ground, then placed beside your model in its own colour. Your original object is not changed.",[35,70,71,74],{},[27,72,73],{},"Checks you can read."," For every part the panel shows its size in millimetres and a check mark when it fits the bed and is closed.",[35,76,77,80],{},[27,78,79],{},"Per-part STL export."," One STL per part in millimetres, plus one dowel file.",[16,82,83,84,89],{},"Details for every control are in the ",[85,86,88],"a",{"href":87},"\u002Fdocs\u002Fbedsplit\u002Fpanel","panel reference",".",[16,91,92],{},[93,94],"img",{"alt":95,"src":96},"BedSplit in Blender: a knight figure cut by red, green and blue cut planes, with the BedSplit sidebar showing Resize for print, the cut positions, dowel settings and a Result panel that lists the parts","\u002Fmedia\u002Fbedsplit-result-panel.jpg",[11,98,100],{"id":99},"printer-presets","Printer presets",[16,102,103],{},"The preset list holds 18 printers, or you can type any bed size:",[105,106,107,120],"table",{},[108,109,110],"thead",{},[111,112,113,117],"tr",{},[114,115,116],"th",{},"Brand",[114,118,119],{},"Presets",[121,122,123,132,140,148,156,164,172],"tbody",{},[111,124,125,129],{},[126,127,128],"td",{},"Bambu Lab",[126,130,131],{},"A1 mini, A1 \u002F P1 \u002F X1, H2D",[111,133,134,137],{},[126,135,136],{},"Prusa",[126,138,139],{},"MINI+, MK4 \u002F MK3, XL, CORE One",[111,141,142,145],{},[126,143,144],{},"Creality",[126,146,147],{},"Ender 3 \u002F V3 SE, K1, K1 Max, Ender 5 Plus",[111,149,150,153],{},[126,151,152],{},"Anycubic",[126,154,155],{},"Kobra 2, Kobra 3",[111,157,158,161],{},[126,159,160],{},"Elegoo",[126,162,163],{},"Neptune 4, Neptune 4 Max",[111,165,166,169],{},[126,167,168],{},"Sovol",[126,170,171],{},"SV06",[111,173,174,177],{},[126,175,176],{},"Voron",[126,178,179],{},"2.4 300, 0.2",[16,181,182,183,89],{},"The exact sizes are in the ",[85,184,88],{"href":185},"\u002Fdocs\u002Fbedsplit\u002Fpanel#printer-presets",[11,187,189],{"id":188},"resize-for-print","Resize for print",[16,191,192,193,195],{},"If your model is a 2 m sculpt in Blender units, scale does not need to be solved first. Turn on ",[27,194,189],{},", type the real length of the longest side in millimetres, and BedSplit works at that size. Leave it off and the model is read at its current scale, using the scene unit scale.",[11,197,199],{"id":198},"honest-limits","Honest limits",[16,201,202],{},"Each limit links to the troubleshooting entry that explains what to do about it.",[32,204,205,215,221,231,241,254,264,270],{},[35,206,207,210,211,89],{},[27,208,209],{},"Flat axis-aligned cuts only."," Planes run along X, Y and Z. You can slide them, add them and remove them, but you cannot tilt them, and there are no curved or seam-following cuts. If a cut has to avoid a face, move it a few millimetres. See ",[85,212,214],{"href":213},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#n-parts-larger-than-the-bed-add-a-cut-plane","parts still larger than the bed",[35,216,217,220],{},[27,218,219],{},"One joint type."," Joints are round dowels. There are no dovetails, magnet pockets or snap fits.",[35,222,223,226,227,89],{},[27,224,225],{},"Thin sections get no dowel."," A socket needs 1.6 mm of material around it in both parts. With the default 6 mm dowel and 0.2 mm clearance, that means a cross-section of roughly 10 mm. Thinner joints stay flat, and the panel counts them so you can glue them. See ",[85,228,230],{"href":229},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#some-joints-have-no-dowel","joints without a dowel",[35,232,233,236,237,89],{},[27,234,235],{},"Badly broken meshes are rebuilt, not mended."," When a light repair cannot make the mesh a clean solid, BedSplit rebuilds the surface with a voxel remesh. That closes every gap but rounds off fine detail. The panel gives the deviation in millimetres and shows a heavy-repair warning when more than 1 percent of the surface moved by over 0.5 mm. In Pavel's own test meshes, downloaded and AI-generated models among them, most passed every check and a few needed the rebuild and lost visible detail. See ",[85,238,240],{"href":239},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#the-model-has-holes-or-is-not-manifold-do-i-need-to-fix-it-first","holes and non-manifold meshes",[35,242,243,246,247,249,250,89],{},[27,244,245],{},"A 64-part ceiling."," If the bed would need more than 64 parts, BedSplit stops and asks you to check the scale. A figure that really needs 64 pieces is rare, whereas a model in metres read as millimetres is common, so the ceiling catches the mistake before it becomes a minute of cutting. Use ",[27,248,189],{}," to fix it. See ",[85,251,253],{"href":252},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#it-says-the-model-is-mm-long-and-needs-about-parts-turn-on-resize-for-print","the scale message",[35,255,256,259,260,89],{},[27,257,258],{},"Dense meshes take a while."," The cut itself is usually quick. A mesh with millions of faces, or one that needs a rebuild, can take half a minute, and the cursor shows it is working. See ",[85,261,263],{"href":262},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#splitting-is-slow","slow splits",[35,265,266,269],{},[27,267,268],{},"Built for filament printing."," There is no hollowing, no support generation and no 3MF export, so a resin printer gets solid parts and you hollow them in your slicer.",[35,271,272,275,276,89],{},[27,273,274],{},"Fit depends on your printer."," The exported parts were sliced in PrusaSlicer to confirm they are closed, but printers over- or under-extrude differently, so print one small joint before a long job. See ",[85,277,279],{"href":278},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#the-dowels-are-too-tight-or-too-loose","dowels too tight or too loose",[11,281,283],{"id":282},"requirements","Requirements",[16,285,286,287,290,291,89],{},"Blender 4.2 or newer, installed as an extension. It was tested on 4.2, 4.5 and 5.2. It writes STL files only when you press ",[27,288,289],{},"Export STL",". See ",[85,292,294],{"href":293},"\u002Fdocs\u002Fbedsplit\u002Finstall","installation",[11,296,298],{"id":297},"free-lite-version","Free Lite version",[16,300,301,302,304,305,307,308,310,311,89],{},"BedSplit Lite is a separate, free, open-source extension. It has the printer presets, ",[27,303,189],{},", ",[27,306,29],{}," with flat cuts and capped, closed parts, parts laid flat and per-part STL export. It does not have dowels and sockets, mesh repair, ",[27,309,49],{},", movable planes or the dowel settings. If your model is already watertight and you glue the parts, Lite may be all you need. Download it from the ",[85,312,316],{"href":313,"rel":314},"https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fbedsplit-lite\u002Freleases\u002Flatest",[315],"nofollow","BedSplit Lite releases page",[11,318,320],{"id":319},"how-to-buy","How to buy",[16,322,323,324,89],{},"BedSplit costs $22 and is sold on Gumroad. Updates are free. You get a zip file that you install from disk in Blender, without unzipping it. Questions can go through the ",[85,325,327],{"href":326},"\u002Fcontact","contact page",[11,329,331],{"id":330},"learn-more","Learn more",[16,333,334,335,339],{},"Built and tested by Pavel at Mendbox Studio (",[85,336,338],{"href":337},"\u002Fabout","about",").",[32,341,342,348,353,358,364,370,376],{},[35,343,344],{},[85,345,347],{"href":346},"\u002Fdocs\u002Fbedsplit","Overview of the documentation",[35,349,350],{},[85,351,352],{"href":293},"Install BedSplit",[35,354,355],{},[85,356,357],{"href":87},"Panel reference",[35,359,360],{},[85,361,363],{"href":362},"\u002Fdocs\u002Fbedsplit\u002Fworkflows","Step-by-step workflows",[35,365,366],{},[85,367,369],{"href":368},"\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting","Troubleshooting",[35,371,372],{},[85,373,375],{"href":374},"\u002Fdocs\u002Fbedsplit#version-history","Version history",[35,377,378,379,383],{},"Guide: ",[85,380,382],{"href":381},"\u002Fguides\u002Fsplit-model-for-3d-printing","how to split a model for 3D printing",", including the manual method in plain Blender",{"title":385,"searchDepth":386,"depth":386,"links":387},"",2,[388,389,390,391,392,393,394,395,396],{"id":13,"depth":386,"text":14},{"id":21,"depth":386,"text":22},{"id":99,"depth":386,"text":100},{"id":188,"depth":386,"text":189},{"id":198,"depth":386,"text":199},{"id":282,"depth":386,"text":283},{"id":297,"depth":386,"text":298},{"id":319,"depth":386,"text":320},{"id":330,"depth":386,"text":331},[398],{"label":399,"to":400},"Get BedSplit on Gumroad","https:\u002F\u002Fquadfix.gumroad.com\u002Fl\u002Fbedsplit","BedSplit cuts a large Blender model into parts that fit your printer bed, adds dowel sockets, repairs the mesh and exports one STL per part. $22, Blender 4.2+.","md",{"summary":404,"to":313},"BedSplit Lite is free and open source. It splits a watertight model to your bed with flat cuts and exports one STL per part. No dowels, no mesh repair, no cut preview.",{},"BedSplit",true,"\u002Faddons\u002Fbedsplit","\u002Fmedia\u002Fbedsplit.jpg","$22","How do I split a big model to fit my print bed?","---\ntitle: \"BedSplit Blender add-on: split to bed size\"\ndescription: \"BedSplit cuts a large Blender model into parts that fit your printer bed, adds dowel sockets, repairs the mesh and exports one STL per part. $22, Blender 4.2+.\"\nname: BedSplit\nprice: \"$22\"\nstatus: released\nproblem: \"How do I split a big model to fit my print bed?\"\nversion: \"0.1.3\"\nblender: \"4.2 and newer\"\nvideo: \u002Fmedia\u002Fbedsplit.mp4\nposter: \u002Fmedia\u002Fbedsplit.jpg\nbuy:\n  - { label: 'Get BedSplit on Gumroad', to: 'https:\u002F\u002Fquadfix.gumroad.com\u002Fl\u002Fbedsplit' }\nlite:\n  summary: \"BedSplit Lite is free and open source. It splits a watertight model to your bed with flat cuts and exports one STL per part. No dowels, no mesh repair, no cut preview.\"\n  to: \"https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fbedsplit-lite\u002Freleases\u002Flatest\"\nupdated: 2026-11-16\n---\n\n## The problem\n\nYou have a helmet, a statue, a piece of terrain or an AI-generated figure, and it is larger than your printer bed. A 220 mm bed does not care that the model looks great on screen. You need to cut it, keep every part inside the build volume, and make sure the parts line up when you glue them. Doing that by hand means placing planes, running booleans, fixing the holes the booleans leave, modelling pins and sockets, and rotating every piece so it lies flat. For a model that needs six or eight parts, that is an evening.\n\n## What BedSplit does\n\nBedSplit is a Blender add-on with one sidebar tab. You pick a printer, press **Split to Bed**, and it does the rest:\n\n- **Fits the bed.** It counts how many slabs each axis needs for the printer's width, depth and height, and places flat cuts along X, Y and Z. Positions are nudged away from spots where the cross-section is too small to hold a dowel.\n- **Cut planes you can move.** **Find Cuts** shows the planes in the viewport. You can change any position in millimetres, add a cut on X, Y or Z, or remove one, then split. This is how you keep a cut off a face or a hand.\n- **Dowel sockets.** Every joint gets round sockets in both faces, plus one dowel mesh to print as many times as the name says. You set diameter, depth, clearance and the number of dowels per joint.\n- **Mesh repair first.** Holes, flipped normals, loose geometry, overlapping shells and non-manifold edges are fixed before cutting. The result panel tells you what was repaired and warns when the surface had to be rebuilt.\n- **Parts laid flat.** Each part is turned so its largest cut face sits on the ground, then placed beside your model in its own colour. Your original object is not changed.\n- **Checks you can read.** For every part the panel shows its size in millimetres and a check mark when it fits the bed and is closed.\n- **Per-part STL export.** One STL per part in millimetres, plus one dowel file.\n\nDetails for every control are in the [panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel).\n\n![BedSplit in Blender: a knight figure cut by red, green and blue cut planes, with the BedSplit sidebar showing Resize for print, the cut positions, dowel settings and a Result panel that lists the parts](\u002Fmedia\u002Fbedsplit-result-panel.jpg)\n\n## Printer presets\n\nThe preset list holds 18 printers, or you can type any bed size:\n\n| Brand | Presets |\n|---|---|\n| Bambu Lab | A1 mini, A1 \u002F P1 \u002F X1, H2D |\n| Prusa | MINI+, MK4 \u002F MK3, XL, CORE One |\n| Creality | Ender 3 \u002F V3 SE, K1, K1 Max, Ender 5 Plus |\n| Anycubic | Kobra 2, Kobra 3 |\n| Elegoo | Neptune 4, Neptune 4 Max |\n| Sovol | SV06 |\n| Voron | 2.4 300, 0.2 |\n\nThe exact sizes are in the [panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel#printer-presets).\n\n## Resize for print\n\nIf your model is a 2 m sculpt in Blender units, scale does not need to be solved first. Turn on **Resize for print**, type the real length of the longest side in millimetres, and BedSplit works at that size. Leave it off and the model is read at its current scale, using the scene unit scale.\n\n## Honest limits\n\nEach limit links to the troubleshooting entry that explains what to do about it.\n\n- **Flat axis-aligned cuts only.** Planes run along X, Y and Z. You can slide them, add them and remove them, but you cannot tilt them, and there are no curved or seam-following cuts. If a cut has to avoid a face, move it a few millimetres. See [parts still larger than the bed](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#n-parts-larger-than-the-bed-add-a-cut-plane).\n- **One joint type.** Joints are round dowels. There are no dovetails, magnet pockets or snap fits.\n- **Thin sections get no dowel.** A socket needs 1.6 mm of material around it in both parts. With the default 6 mm dowel and 0.2 mm clearance, that means a cross-section of roughly 10 mm. Thinner joints stay flat, and the panel counts them so you can glue them. See [joints without a dowel](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#some-joints-have-no-dowel).\n- **Badly broken meshes are rebuilt, not mended.** When a light repair cannot make the mesh a clean solid, BedSplit rebuilds the surface with a voxel remesh. That closes every gap but rounds off fine detail. The panel gives the deviation in millimetres and shows a heavy-repair warning when more than 1 percent of the surface moved by over 0.5 mm. In Pavel's own test meshes, downloaded and AI-generated models among them, most passed every check and a few needed the rebuild and lost visible detail. See [holes and non-manifold meshes](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#the-model-has-holes-or-is-not-manifold-do-i-need-to-fix-it-first).\n- **A 64-part ceiling.** If the bed would need more than 64 parts, BedSplit stops and asks you to check the scale. A figure that really needs 64 pieces is rare, whereas a model in metres read as millimetres is common, so the ceiling catches the mistake before it becomes a minute of cutting. Use **Resize for print** to fix it. See [the scale message](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#it-says-the-model-is-mm-long-and-needs-about-parts-turn-on-resize-for-print).\n- **Dense meshes take a while.** The cut itself is usually quick. A mesh with millions of faces, or one that needs a rebuild, can take half a minute, and the cursor shows it is working. See [slow splits](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#splitting-is-slow).\n- **Built for filament printing.** There is no hollowing, no support generation and no 3MF export, so a resin printer gets solid parts and you hollow them in your slicer.\n- **Fit depends on your printer.** The exported parts were sliced in PrusaSlicer to confirm they are closed, but printers over- or under-extrude differently, so print one small joint before a long job. See [dowels too tight or too loose](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting#the-dowels-are-too-tight-or-too-loose).\n\n## Requirements\n\nBlender 4.2 or newer, installed as an extension. It was tested on 4.2, 4.5 and 5.2. It writes STL files only when you press **Export STL**. See [installation](\u002Fdocs\u002Fbedsplit\u002Finstall).\n\n## Free Lite version\n\nBedSplit Lite is a separate, free, open-source extension. It has the printer presets, **Resize for print**, **Split to Bed** with flat cuts and capped, closed parts, parts laid flat and per-part STL export. It does not have dowels and sockets, mesh repair, **Find Cuts**, movable planes or the dowel settings. If your model is already watertight and you glue the parts, Lite may be all you need. Download it from the [BedSplit Lite releases page](https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fbedsplit-lite\u002Freleases\u002Flatest).\n\n## How to buy\n\nBedSplit costs $22 and is sold on Gumroad. Updates are free. You get a zip file that you install from disk in Blender, without unzipping it. Questions can go through the [contact page](\u002Fcontact).\n\n## Learn more\n\nBuilt and tested by Pavel at Mendbox Studio ([about](\u002Fabout)).\n\n- [Overview of the documentation](\u002Fdocs\u002Fbedsplit)\n- [Install BedSplit](\u002Fdocs\u002Fbedsplit\u002Finstall)\n- [Panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel)\n- [Step-by-step workflows](\u002Fdocs\u002Fbedsplit\u002Fworkflows)\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting)\n- [Version history](\u002Fdocs\u002Fbedsplit#version-history)\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing), including the manual method in plain Blender\n",{"title":5,"description":401},"released","addons\u002Fbedsplit","2026-11-16","0.1.3","\u002Fmedia\u002Fbedsplit.mp4","AWWRux7H46pGSTcya4nV1F3rkKd9_3UJim5HXXRVuuk",[421],{"id":422,"title":423,"addon":424,"body":425,"description":1073,"extension":402,"meta":1074,"navigation":407,"path":381,"poster":409,"rawbody":1075,"seo":1076,"stem":1077,"updated":416,"video":418,"__hash__":1078},"guides\u002Fguides\u002Fsplit-model-for-3d-printing.md","Split a model for 3D printing in Blender","bedsplit",{"type":8,"value":426,"toc":1059},[427,438,442,496,503,514,518,521,573,582,595,599,602,664,682,685,699,703,709,734,741,745,748,766,769,773,776,798,802,816,820,823,843,850,854,876,882,886,918,922,994,998,1004,1047,1053,1056],[16,428,429,430,433,434,437],{},"To split a model for 3D printing in Blender, check its size in millimetres first, then cut it into parts with ",[27,431,432],{},"Mesh > Bisect"," (with ",[27,435,436],{},"Fill"," on) or with a Boolean modifier and a cutter cube, make sure every part is a closed solid, and export the parts as STL files. Add pin sockets if the parts have to line up when you glue them. I ran each step below on a test mesh in Blender 4.2, 4.5 and 5.2, and checked the result for open edges.",[11,439,441],{"id":440},"step-1-check-the-size-against-your-bed","Step 1: check the size against your bed",[443,444,445,478,493],"ol",{},[35,446,447,448,451,452,455,456,459,460,304,463,459,466,470,471,459,474,477],{},"Open the ",[27,449,450],{},"Scene Properties"," tab, ",[27,453,454],{},"Units"," panel. Set ",[27,457,458],{},"Unit System"," to ",[27,461,462],{},"Metric",[27,464,465],{},"Unit Scale",[467,468,469],"code",{},"0.001"," and ",[27,472,473],{},"Length",[27,475,476],{},"Millimeters",". Now one Blender unit is one millimetre.",[35,479,480,481,484,485,488,489,492],{},"Select the model, press ",[27,482,483],{},"N"," and open the ",[27,486,487],{},"Item"," tab. ",[27,490,491],{},"Dimensions"," shows the size. These values include object scale.",[35,494,495],{},"Compare each side with your printer's build volume. Height is a limit too.",[16,497,498,499,502],{},"This also matters for export. With default settings the STL exporter writes the plain Blender-unit numbers and ignores the Unit Scale (its ",[27,500,501],{},"Scene Unit"," option is off). In my test a cube at 10 units went into the file as 10. Slicers read STL numbers as millimetres, so with this unit setup the file matches what you saw.",[16,504,505,506,509,510,513],{},"If the model needs resizing, scale it (",[27,507,508],{},"S",") and apply the scale (",[27,511,512],{},"Ctrl A > Scale","), so later cuts and exports use the real numbers.",[11,515,517],{"id":516},"step-2-cut-with-bisect","Step 2: cut with Bisect",[16,519,520],{},"Bisect cuts a mesh along one plane and can close the cut for you.",[443,522,523,533,539,559],{},[35,524,480,525,528,529,532],{},[27,526,527],{},"Tab"," for Edit Mode, and press ",[27,530,531],{},"A"," to select everything.",[35,534,535,536,538],{},"Choose ",[27,537,432],{}," (the toolbar has a Bisect tool too). Drag a line across the model in the viewport to place the plane.",[35,540,447,541,544,545,470,548,551,552,470,555,558],{},[27,542,543],{},"Adjust Last Operation"," panel in the bottom-left corner and type the ",[27,546,547],{},"Plane Point",[27,549,550],{},"Plane Normal",", for example ",[467,553,554],{},"0, 0, 120",[467,556,557],{},"0, 0, 1"," for a flat cut at 120 mm height.",[35,560,561,562,564,565,568,569,572],{},"Switch on ",[27,563,436],{},". Switch on ",[27,566,567],{},"Clear Inner"," to delete the part on the side opposite the plane normal, or ",[27,570,571],{},"Clear Outer"," for the other side.",[16,574,575,576,578,579,581],{},"Fill matters. In my test a sphere cut without ",[27,577,436],{}," had 32 open boundary edges, and with ",[27,580,436],{}," it had none. Fill covers the cut with a single flat face, so the half is a closed solid.",[16,583,584,585,588,589,591,592,594],{},"To keep both halves, duplicate the object first (",[27,586,587],{},"Shift D",", then right-click to cancel the move). Cut one copy with ",[27,590,567],{}," and the other with ",[27,593,571],{},", same plane. In my test the two halves added up to the volume of the original (4.1219 cubic units against 2.3700 plus 1.7519).",[11,596,598],{"id":597},"step-3-cut-with-a-boolean-and-a-cutter-cube","Step 3: cut with a Boolean and a cutter cube",[16,600,601],{},"A Boolean suits cuts you want to move or repeat, because the cutter stays a normal object.",[443,603,604,611,617,647,654],{},[35,605,606,607,610],{},"Add a cube (",[27,608,609],{},"Shift A > Mesh > Cube",") and scale it so one face lies exactly on the cut position and the cube covers everything on one side of it. This is your cutter.",[35,612,613,614,616],{},"Duplicate the model (",[27,615,587],{},"). You will have two copies.",[35,618,619,620,623,624,627,628,459,631,304,634,459,637,640,641,459,644,89],{},"On the first copy open the ",[27,621,622],{},"Modifiers"," tab and choose ",[27,625,626],{},"Add Modifier > Generate > Boolean",". Set ",[27,629,630],{},"Operation",[27,632,633],{},"Difference",[27,635,636],{},"Operand Type",[27,638,639],{},"Object",", and pick the cutter. Set ",[27,642,643],{},"Solver",[27,645,646],{},"Exact",[35,648,649,650,653],{},"Apply the modifier with ",[27,651,652],{},"Ctrl A"," while hovering over it.",[35,655,656,657,659,660,663],{},"On the second copy add the same modifier with ",[27,658,630],{}," set to ",[27,661,662],{},"Intersect"," and apply it.",[16,665,666,667,670,671,674,675,678,679,681],{},"In 4.2 the other solver is called ",[27,668,669],{},"Fast","; 4.5 adds ",[27,672,673],{},"Manifold",", and in 5.x Fast is renamed ",[27,676,677],{},"Float",". Fast\u002FFloat gave the same closed halves on a clean sphere in my test; Manifold was not tested. Start with ",[27,680,646],{},". Hide the cutter when both are applied.",[16,683,684],{},"Difference keeps what the cutter does not cover, Intersect keeps what it does. My two test halves again added up to the volume of the original, and both were closed.",[686,687,688],"blockquote",{},[16,689,690,691,694,695,89],{},"A Boolean needs the model itself to be closed. If it fails or leaves holes, find the problem with ",[27,692,693],{},"Select > Select All by Trait > Non Manifold"," (Edit Mode) and see ",[85,696,698],{"href":697},"\u002Fguides\u002Fclean-up-imported-stl","how to clean up an imported STL",[11,700,702],{"id":701},"step-4-make-the-cut-face-solid","Step 4: make the cut face solid",[16,704,705,706,708],{},"A Boolean closes the cut for you. If you cut with Bisect and left ",[27,707,436],{}," off, or you deleted faces by hand, close it yourself:",[443,710,711,717,724],{},[35,712,713,714,716],{},"In Edit Mode choose ",[27,715,693],{},". The open edge loop of the cut is selected (32 edges in my test).",[35,718,719,720,723],{},"Press ",[27,721,722],{},"F"," to fill it. The result is closed, with one large flat face.",[35,725,726,727,730,731,733],{},"For quads on the cut face, choose ",[27,728,729],{},"Face > Grid Fill"," instead. It worked on the same loop and gave a closed result too. ",[27,732,722],{}," leaves one n-gon, which is fine for printing.",[16,735,736,737,89],{},"For holes that are not a flat loop, see ",[85,738,740],{"href":739},"\u002Fguides\u002Ffill-hole-with-quads","how to fill a hole with quads",[11,742,744],{"id":743},"step-5-add-pin-sockets-so-the-parts-line-up","Step 5: add pin sockets so the parts line up",[16,746,747],{},"Glued flat faces slide against each other. Round pins and sockets fix that.",[443,749,750,757,763],{},[35,751,752,753,756],{},"Add a cylinder (",[27,754,755],{},"Shift A > Mesh > Cylinder",") for the socket: a radius a little bigger than the pin, and a length that reaches into both halves. Centre it on the cut plane.",[35,758,759,760,762],{},"Apply a Boolean ",[27,761,633],{}," with the cylinder as operand to the lower half, and again to the upper half. The same cylinder cuts a socket in both.",[35,764,765],{},"Model a pin as a second cylinder, a bit smaller than the socket, as long as the two socket depths together. Print it separately.",[16,767,768],{},"In my test both halves got the socket and stayed closed. A printed pin needs clearance. For example, a 6 mm pin in a 6.4 mm socket leaves 0.2 mm each side (my test used radii of 0.30 and 0.32 units). Printers differ, so print one pair first. Keep sockets away from the outline, where they would leave a paper-thin wall.",[11,770,772],{"id":771},"step-6-separate-loose-parts","Step 6: separate loose parts",[16,774,775],{},"If a cut leaves several pieces in one object, split them into objects. In my test a Boolean Difference with a thin slab through a sphere left two floating halves in one mesh.",[443,777,778,795],{},[35,779,780,781,783,784,787,788,791,792,89],{},"In Edit Mode press ",[27,782,531],{},", then ",[27,785,786],{},"P"," and choose ",[27,789,790],{},"By Loose Parts",". The path is ",[27,793,794],{},"Mesh > Separate > By Loose Parts",[35,796,797],{},"Back in Object Mode each piece is its own object. Both pieces were closed in my test.",[11,799,801],{"id":800},"cuts-that-are-not-flat","Cuts that are not flat",[16,803,804,805,808,809,812,813,815],{},"Bisect and a cutter cube make flat cuts. For a curved dividing line, select the faces on one side in Edit Mode and press ",[27,806,807],{},"P > Selection"," (",[27,810,811],{},"Mesh > Separate > Selection","). In my test I selected a wavy band of faces on a UV sphere (the dividing line followed z = 0.25 sin 3x) and separated it. That gave two objects of 256 faces each, both open along a 40-edge boundary. Pressing ",[27,814,722],{}," on each boundary loop closed both parts with a single 40-sided face. The two cut faces are not flat, so they will not sit flush against each other, and you have to check the fit and the walls yourself. BedSplit below only cuts flat planes.",[11,817,819],{"id":818},"step-7-check-every-part","Step 7: check every part",[16,821,822],{},"Check each part before you slice it. The built-in way:",[443,824,825,830],{},[35,826,713,827,829],{},[27,828,693],{},". Nothing should be selected. Anything selected is an open edge or a bad vertex.",[35,831,832,833,836,837,839,840,842],{},"Turn on ",[27,834,835],{},"Overlays > Statistics"," to see face and vertex counts, and check the ",[27,838,491],{}," of each part in the ",[27,841,487],{}," tab against the bed.",[16,844,845,846,849],{},"The 3D-Print Toolbox is the usual extra check. Since Blender 4.2 it is an extension, installed from ",[27,847,848],{},"Edit > Preferences > Get Extensions",". I did not test it, so this guide uses the built-in selection.",[11,851,853],{"id":852},"step-8-export-only-the-parts","Step 8: export only the parts",[443,855,856,862],{},[35,857,858,859,89],{},"Select the parts you want. In Blender 4.2 and later, choose ",[27,860,861],{},"File > Export > STL (.stl)",[35,863,864,865,868,869,871,872,875],{},"On the right of the file window switch on ",[27,866,867],{},"Export Selected Objects",". Leave ",[27,870,501],{}," off, as explained in step 1, and decide about ",[27,873,874],{},"Apply Modifiers",". If you did not apply your Boolean modifiers, switch it on.",[16,877,878,879,881],{},"In my test, with ",[27,880,867],{}," on, only the selected cube was in the file, 12 triangles, and with it off both cubes were, 24 triangles.",[11,883,885],{"id":884},"what-goes-wrong","What goes wrong",[32,887,888,894,900,906,912],{},[35,889,890,893],{},[27,891,892],{},"The cut leaves a hole."," Fill was off, or the model was not closed. Use steps 4 and 7.",[35,895,896,899],{},[27,897,898],{},"The two halves overlap or leave a gap."," The Bisect plane and the cutter face are not on the same plane. Type the plane numbers.",[35,901,902,905],{},[27,903,904],{},"The model prints at the wrong size."," The unit setup in step 1 was skipped.",[35,907,908,911],{},[27,909,910],{},"The part is still too big."," Cut again along another axis. Every cut means more fill, sockets and checks.",[35,913,914,915,89],{},"More fixes are on the ",[85,916,917],{"href":368},"BedSplit troubleshooting page",[11,919,921],{"id":920},"which-method-fits","Which method fits",[105,923,924,937],{},[108,925,926],{},[111,927,928,931,934],{},[114,929,930],{},"Method",[114,932,933],{},"Good for",[114,935,936],{},"Breaks when",[121,938,939,950,961,972,983],{},[111,940,941,944,947],{},[126,942,943],{},"Bisect with Fill",[126,945,946],{},"One flat cut, fast",[126,948,949],{},"Many cuts, or sockets by hand",[111,951,952,955,958],{},[126,953,954],{},"Boolean with a cutter cube",[126,956,957],{},"Cut shapes you control, repeatable",[126,959,960],{},"Mesh is not closed",[111,962,963,966,969],{},[126,964,965],{},"Grid Fill or F on the cut",[126,967,968],{},"Fixing a cut left open",[126,970,971],{},"The cut is not a flat loop",[111,973,974,977,980],{},[126,975,976],{},"Cylinder Boolean for pins",[126,978,979],{},"Alignment between parts",[126,981,982],{},"You need dozens of joints",[111,984,985,988,991],{},[126,986,987],{},"Separate by Loose Parts",[126,989,990],{},"Splitting one object into objects",[126,992,993],{},"Parts touch each other",[11,995,997],{"id":996},"faster-with-bedsplit","Faster with BedSplit",[16,999,1000,1001,1003],{},"With many cuts, the manual route repeats the chain above for every joint. ",[85,1002,406],{"href":408}," does it for you:",[32,1005,1006,1019,1024,1031,1034,1044],{},[35,1007,1008,1009,1011,1012,1014,1015,1018],{},"Pick your printer in the ",[27,1010,406],{}," tab of the sidebar (",[27,1013,483],{},"), or choose ",[27,1016,1017],{},"Custom"," and type the bed size. It has presets for Bambu Lab, Prusa, Creality, Anycubic, Elegoo, Sovol and Voron machines.",[35,1020,832,1021,1023],{},[27,1022,189],{}," and enter the longest side in millimetres, so you do not set up units.",[35,1025,719,1026,1028,1029,89],{},[27,1027,49],{}," to see the cut planes in the viewport, move or remove a plane, or add one with the X, Y or Z buttons, then press ",[27,1030,29],{},[35,1032,1033],{},"Each joint gets round dowel sockets in both faces, and you set the diameter, depth, clearance and the dowels per joint. A socket is only placed where the wall is thick enough.",[35,1035,1036,1037,1040,1041,1043],{},"Each part is turned flat on its cut face, the ",[27,1038,1039],{},"Result"," panel lists every part with its size and whether it fits and is closed, and ",[27,1042,289],{}," writes one file per part in millimetres, plus the dowel.",[35,1045,1046],{},"Holes, flipped normals and overlapping shells are repaired first. The parts are new objects and your original stays.",[16,1048,1049,1050,89],{},"Its limits: the cuts are flat planes along X, Y and Z (you can move them, not rotate them), the dowels are round, and there is no hollowing or supports. It works in Blender 4.2 and newer. The steps are in the ",[85,1051,1052],{"href":362},"BedSplit workflows",[16,1054,1055],{},"The free BedSplit Lite splits a watertight model to your bed with flat cuts and exports one STL per part, without dowels, mesh repair or the cut preview.",[16,1057,1058],{},"For one or two cuts, the manual methods above are enough.",{"title":385,"searchDepth":386,"depth":386,"links":1060},[1061,1062,1063,1064,1065,1066,1067,1068,1069,1070,1071,1072],{"id":440,"depth":386,"text":441},{"id":516,"depth":386,"text":517},{"id":597,"depth":386,"text":598},{"id":701,"depth":386,"text":702},{"id":743,"depth":386,"text":744},{"id":771,"depth":386,"text":772},{"id":800,"depth":386,"text":801},{"id":818,"depth":386,"text":819},{"id":852,"depth":386,"text":853},{"id":884,"depth":386,"text":885},{"id":920,"depth":386,"text":921},{"id":996,"depth":386,"text":997},"Split a model that is too big for your print bed in Blender: Bisect with Fill, Boolean cuts, closed cut faces, pin sockets and one STL per part, all tested.",{},"---\ntitle: \"Split a model for 3D printing in Blender\"\ndescription: \"Split a model that is too big for your print bed in Blender: Bisect with Fill, Boolean cuts, closed cut faces, pin sockets and one STL per part, all tested.\"\naddon: bedsplit\nvideo: \u002Fmedia\u002Fbedsplit.mp4\nposter: \u002Fmedia\u002Fbedsplit.jpg\nupdated: 2026-11-16\n---\n\nTo split a model for 3D printing in Blender, check its size in millimetres first, then cut it into parts with **Mesh > Bisect** (with **Fill** on) or with a Boolean modifier and a cutter cube, make sure every part is a closed solid, and export the parts as STL files. Add pin sockets if the parts have to line up when you glue them. I ran each step below on a test mesh in Blender 4.2, 4.5 and 5.2, and checked the result for open edges.\n\n## Step 1: check the size against your bed\n\n1. Open the **Scene Properties** tab, **Units** panel. Set **Unit System** to **Metric**, **Unit Scale** to `0.001` and **Length** to **Millimeters**. Now one Blender unit is one millimetre.\n2. Select the model, press **N** and open the **Item** tab. **Dimensions** shows the size. These values include object scale.\n3. Compare each side with your printer's build volume. Height is a limit too.\n\nThis also matters for export. With default settings the STL exporter writes the plain Blender-unit numbers and ignores the Unit Scale (its **Scene Unit** option is off). In my test a cube at 10 units went into the file as 10. Slicers read STL numbers as millimetres, so with this unit setup the file matches what you saw.\n\nIf the model needs resizing, scale it (**S**) and apply the scale (**Ctrl A > Scale**), so later cuts and exports use the real numbers.\n\n## Step 2: cut with Bisect\n\nBisect cuts a mesh along one plane and can close the cut for you.\n\n1. Select the model, press **Tab** for Edit Mode, and press **A** to select everything.\n2. Choose **Mesh > Bisect** (the toolbar has a Bisect tool too). Drag a line across the model in the viewport to place the plane.\n3. Open the **Adjust Last Operation** panel in the bottom-left corner and type the **Plane Point** and **Plane Normal**, for example `0, 0, 120` and `0, 0, 1` for a flat cut at 120 mm height.\n4. Switch on **Fill**. Switch on **Clear Inner** to delete the part on the side opposite the plane normal, or **Clear Outer** for the other side.\n\nFill matters. In my test a sphere cut without **Fill** had 32 open boundary edges, and with **Fill** it had none. Fill covers the cut with a single flat face, so the half is a closed solid.\n\nTo keep both halves, duplicate the object first (**Shift D**, then right-click to cancel the move). Cut one copy with **Clear Inner** and the other with **Clear Outer**, same plane. In my test the two halves added up to the volume of the original (4.1219 cubic units against 2.3700 plus 1.7519).\n\n## Step 3: cut with a Boolean and a cutter cube\n\nA Boolean suits cuts you want to move or repeat, because the cutter stays a normal object.\n\n1. Add a cube (**Shift A > Mesh > Cube**) and scale it so one face lies exactly on the cut position and the cube covers everything on one side of it. This is your cutter.\n2. Duplicate the model (**Shift D**). You will have two copies.\n3. On the first copy open the **Modifiers** tab and choose **Add Modifier > Generate > Boolean**. Set **Operation** to **Difference**, **Operand Type** to **Object**, and pick the cutter. Set **Solver** to **Exact**.\n4. Apply the modifier with **Ctrl A** while hovering over it.\n5. On the second copy add the same modifier with **Operation** set to **Intersect** and apply it.\n\nIn 4.2 the other solver is called **Fast**; 4.5 adds **Manifold**, and in 5.x Fast is renamed **Float**. Fast\u002FFloat gave the same closed halves on a clean sphere in my test; Manifold was not tested. Start with **Exact**. Hide the cutter when both are applied.\n\nDifference keeps what the cutter does not cover, Intersect keeps what it does. My two test halves again added up to the volume of the original, and both were closed.\n\n> A Boolean needs the model itself to be closed. If it fails or leaves holes, find the problem with **Select > Select All by Trait > Non Manifold** (Edit Mode) and see [how to clean up an imported STL](\u002Fguides\u002Fclean-up-imported-stl).\n\n## Step 4: make the cut face solid\n\nA Boolean closes the cut for you. If you cut with Bisect and left **Fill** off, or you deleted faces by hand, close it yourself:\n\n1. In Edit Mode choose **Select > Select All by Trait > Non Manifold**. The open edge loop of the cut is selected (32 edges in my test).\n2. Press **F** to fill it. The result is closed, with one large flat face.\n3. For quads on the cut face, choose **Face > Grid Fill** instead. It worked on the same loop and gave a closed result too. **F** leaves one n-gon, which is fine for printing.\n\nFor holes that are not a flat loop, see [how to fill a hole with quads](\u002Fguides\u002Ffill-hole-with-quads).\n\n## Step 5: add pin sockets so the parts line up\n\nGlued flat faces slide against each other. Round pins and sockets fix that.\n\n1. Add a cylinder (**Shift A > Mesh > Cylinder**) for the socket: a radius a little bigger than the pin, and a length that reaches into both halves. Centre it on the cut plane.\n2. Apply a Boolean **Difference** with the cylinder as operand to the lower half, and again to the upper half. The same cylinder cuts a socket in both.\n3. Model a pin as a second cylinder, a bit smaller than the socket, as long as the two socket depths together. Print it separately.\n\nIn my test both halves got the socket and stayed closed. A printed pin needs clearance. For example, a 6 mm pin in a 6.4 mm socket leaves 0.2 mm each side (my test used radii of 0.30 and 0.32 units). Printers differ, so print one pair first. Keep sockets away from the outline, where they would leave a paper-thin wall.\n\n## Step 6: separate loose parts\n\nIf a cut leaves several pieces in one object, split them into objects. In my test a Boolean Difference with a thin slab through a sphere left two floating halves in one mesh.\n\n1. In Edit Mode press **A**, then **P** and choose **By Loose Parts**. The path is **Mesh > Separate > By Loose Parts**.\n2. Back in Object Mode each piece is its own object. Both pieces were closed in my test.\n\n## Cuts that are not flat\n\nBisect and a cutter cube make flat cuts. For a curved dividing line, select the faces on one side in Edit Mode and press **P > Selection** (**Mesh > Separate > Selection**). In my test I selected a wavy band of faces on a UV sphere (the dividing line followed z = 0.25 sin 3x) and separated it. That gave two objects of 256 faces each, both open along a 40-edge boundary. Pressing **F** on each boundary loop closed both parts with a single 40-sided face. The two cut faces are not flat, so they will not sit flush against each other, and you have to check the fit and the walls yourself. BedSplit below only cuts flat planes.\n\n## Step 7: check every part\n\nCheck each part before you slice it. The built-in way:\n\n1. In Edit Mode choose **Select > Select All by Trait > Non Manifold**. Nothing should be selected. Anything selected is an open edge or a bad vertex.\n2. Turn on **Overlays > Statistics** to see face and vertex counts, and check the **Dimensions** of each part in the **Item** tab against the bed.\n\nThe 3D-Print Toolbox is the usual extra check. Since Blender 4.2 it is an extension, installed from **Edit > Preferences > Get Extensions**. I did not test it, so this guide uses the built-in selection.\n\n## Step 8: export only the parts\n\n1. Select the parts you want. In Blender 4.2 and later, choose **File > Export > STL (.stl)**.\n2. On the right of the file window switch on **Export Selected Objects**. Leave **Scene Unit** off, as explained in step 1, and decide about **Apply Modifiers**. If you did not apply your Boolean modifiers, switch it on.\n\nIn my test, with **Export Selected Objects** on, only the selected cube was in the file, 12 triangles, and with it off both cubes were, 24 triangles.\n\n## What goes wrong\n\n- **The cut leaves a hole.** Fill was off, or the model was not closed. Use steps 4 and 7.\n- **The two halves overlap or leave a gap.** The Bisect plane and the cutter face are not on the same plane. Type the plane numbers.\n- **The model prints at the wrong size.** The unit setup in step 1 was skipped.\n- **The part is still too big.** Cut again along another axis. Every cut means more fill, sockets and checks.\n- More fixes are on the [BedSplit troubleshooting page](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting).\n\n## Which method fits\n\n| Method | Good for | Breaks when |\n|---|---|---|\n| Bisect with Fill | One flat cut, fast | Many cuts, or sockets by hand |\n| Boolean with a cutter cube | Cut shapes you control, repeatable | Mesh is not closed |\n| Grid Fill or F on the cut | Fixing a cut left open | The cut is not a flat loop |\n| Cylinder Boolean for pins | Alignment between parts | You need dozens of joints |\n| Separate by Loose Parts | Splitting one object into objects | Parts touch each other |\n\n## Faster with BedSplit\n\nWith many cuts, the manual route repeats the chain above for every joint. [BedSplit](\u002Faddons\u002Fbedsplit) does it for you:\n\n- Pick your printer in the **BedSplit** tab of the sidebar (**N**), or choose **Custom** and type the bed size. It has presets for Bambu Lab, Prusa, Creality, Anycubic, Elegoo, Sovol and Voron machines.\n- Turn on **Resize for print** and enter the longest side in millimetres, so you do not set up units.\n- Press **Find Cuts** to see the cut planes in the viewport, move or remove a plane, or add one with the X, Y or Z buttons, then press **Split to Bed**.\n- Each joint gets round dowel sockets in both faces, and you set the diameter, depth, clearance and the dowels per joint. A socket is only placed where the wall is thick enough.\n- Each part is turned flat on its cut face, the **Result** panel lists every part with its size and whether it fits and is closed, and **Export STL** writes one file per part in millimetres, plus the dowel.\n- Holes, flipped normals and overlapping shells are repaired first. The parts are new objects and your original stays.\n\nIts limits: the cuts are flat planes along X, Y and Z (you can move them, not rotate them), the dowels are round, and there is no hollowing or supports. It works in Blender 4.2 and newer. The steps are in the [BedSplit workflows](\u002Fdocs\u002Fbedsplit\u002Fworkflows).\n\nThe free BedSplit Lite splits a watertight model to your bed with flat cuts and exports one STL per part, without dowels, mesh repair or the cut preview.\n\nFor one or two cuts, the manual methods above are enough.\n",{"title":423,"description":1073},"guides\u002Fsplit-model-for-3d-printing","5n2cfxlGyZ8ISzxNukRgaYCCPO-vdFAyafC4C8rOwdE",[1080,1278,1499,2215,2484],{"id":1081,"title":1082,"addon":424,"body":1083,"description":1271,"extension":402,"meta":1272,"navigation":407,"order":1273,"path":346,"rawbody":1274,"seo":1275,"stem":1276,"updated":416,"__hash__":1277},"docs\u002Fdocs\u002Fbedsplit\u002Findex.md","BedSplit documentation",{"type":8,"value":1084,"toc":1260},[1085,1089,1095,1099,1132,1136,1166,1170,1181,1184,1189,1192,1232,1240,1244],[11,1086,1088],{"id":1087},"what-bedsplit-is","What BedSplit is",[16,1090,1091,1092,89],{},"BedSplit is a Blender 4.2+ extension that takes a mesh that is too big for your 3D printer and turns it into closed parts that each fit the build volume. It places flat cuts, drills round dowel sockets into the joints, repairs the mesh first, lays every part flat and exports one STL per part. The product overview is on the ",[85,1093,1094],{"href":408},"BedSplit page",[11,1096,1098],{"id":1097},"the-idea-in-five-steps","The idea in five steps",[443,1100,1101,1107,1110,1116,1122],{},[35,1102,1103,1104,1106],{},"Select your model in Object Mode and open the ",[27,1105,406],{}," tab in the sidebar.",[35,1108,1109],{},"Choose your printer, or type a custom bed size.",[35,1111,1112,1113,1115],{},"Optionally turn on ",[27,1114,189],{}," and type the real longest side in millimetres.",[35,1117,1118,1119,1121],{},"Optionally press ",[27,1120,49],{}," and move, add or remove cut planes.",[35,1123,719,1124,1126,1127,1129,1130,89],{},[27,1125,29],{},", check the ",[27,1128,1039],{}," panel, then ",[27,1131,289],{},[11,1133,1135],{"id":1134},"documentation-pages","Documentation pages",[32,1137,1138,1144,1149,1155,1160],{},[35,1139,1140,1143],{},[85,1141,1142],{"href":293},"Install",": installing from disk, where the panel appears, updating, uninstalling, Lite versus the full version.",[35,1145,1146,1148],{},[85,1147,357],{"href":87},": every control, its default and its range, plus the printer preset table.",[35,1150,1151,1154],{},[85,1152,1153],{"href":362},"Workflows",": fitting a figure to a 220 mm bed, choosing cuts, adding dowels, exporting and assembling.",[35,1156,1157,1159],{},[85,1158,369],{"href":368},": non-manifold meshes, wrong scale, parts that are still too big, dowels in thin walls and more.",[35,1161,1162,1165],{},[85,1163,375],{"href":1164},"#version-history",": what each release contained.",[11,1167,1169],{"id":1168},"good-to-know-before-you-start","Good to know before you start",[32,1171,1172,1175,1178],{},[35,1173,1174],{},"The model must be a mesh object. If an imported file puts the mesh under an empty parent, BedSplit finds the only mesh selected, or the only mesh under the active object.",[35,1176,1177],{},"The original is never changed. The parts are new objects in a collection named after the source.",[35,1179,1180],{},"Everything is done in millimetres. The cutting positions you see are millimetres from the start of the model along each axis.",[11,1182,375],{"id":1183},"version-history",[1185,1186,1188],"h3",{"id":1187},"_013-13-november-2026","0.1.3 (13 November 2026)",[16,1190,1191],{},"The first public release, tagged v0.1.3 and sold on Gumroad. It needs Blender 4.2.0 or newer. It contains:",[32,1193,1194,1197,1201,1206,1217,1220,1223,1229],{},[35,1195,1196],{},"18 printer presets and a custom bed size.",[35,1198,1199,89],{},[27,1200,189],{},[35,1202,1203,1205],{},[27,1204,29],{}," with automatic cut planes along X, Y and Z.",[35,1207,1208,1210,1211,470,1214,89],{},[27,1209,49],{},", with planes drawn in the viewport, editable positions, ",[27,1212,1213],{},"Add Cut",[27,1215,1216],{},"Remove Cut",[35,1218,1219],{},"Round dowel sockets with settings for diameter, depth, clearance and dowels per joint.",[35,1221,1222],{},"Repair of holes, flipped normals, overlapping shells and non-manifold geometry before cutting.",[35,1224,1225,1226,1228],{},"Parts laid flat beside the source, and a ",[27,1227,1039],{}," panel with size and checks per part.",[35,1230,1231],{},"Export of one STL per part and one dowel file.",[16,1233,1234,1235,1239],{},"The free ",[85,1236,1238],{"href":313,"rel":1237},[315],"BedSplit Lite"," covers flat cuts without dowels, repair or cut preview.",[11,1241,1243],{"id":1242},"related","Related",[32,1245,1246,1251,1255],{},[35,1247,1248,1249],{},"Product page: ",[85,1250,406],{"href":408},[35,1252,1253],{},[85,1254,369],{"href":368},[35,1256,378,1257,1259],{},[85,1258,382],{"href":381},", manual method first, then the add-on",{"title":385,"searchDepth":386,"depth":386,"links":1261},[1262,1263,1264,1265,1266,1270],{"id":1087,"depth":386,"text":1088},{"id":1097,"depth":386,"text":1098},{"id":1134,"depth":386,"text":1135},{"id":1168,"depth":386,"text":1169},{"id":1183,"depth":386,"text":375,"children":1267},[1268],{"id":1187,"depth":1269,"text":1188},3,{"id":1242,"depth":386,"text":1243},"Documentation for BedSplit, the Blender add-on that splits a model to fit your 3D printer bed: dowel sockets, mesh repair, STL export and the version history.",{},1,"---\ntitle: \"BedSplit documentation\"\ndescription: \"Documentation for BedSplit, the Blender add-on that splits a model to fit your 3D printer bed: dowel sockets, mesh repair, STL export and the version history.\"\naddon: bedsplit\norder: 1\nupdated: 2026-11-16\n---\n\n## What BedSplit is\n\nBedSplit is a Blender 4.2+ extension that takes a mesh that is too big for your 3D printer and turns it into closed parts that each fit the build volume. It places flat cuts, drills round dowel sockets into the joints, repairs the mesh first, lays every part flat and exports one STL per part. The product overview is on the [BedSplit page](\u002Faddons\u002Fbedsplit).\n\n## The idea in five steps\n\n1. Select your model in Object Mode and open the **BedSplit** tab in the sidebar.\n2. Choose your printer, or type a custom bed size.\n3. Optionally turn on **Resize for print** and type the real longest side in millimetres.\n4. Optionally press **Find Cuts** and move, add or remove cut planes.\n5. Press **Split to Bed**, check the **Result** panel, then **Export STL**.\n\n## Documentation pages\n\n- [Install](\u002Fdocs\u002Fbedsplit\u002Finstall): installing from disk, where the panel appears, updating, uninstalling, Lite versus the full version.\n- [Panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel): every control, its default and its range, plus the printer preset table.\n- [Workflows](\u002Fdocs\u002Fbedsplit\u002Fworkflows): fitting a figure to a 220 mm bed, choosing cuts, adding dowels, exporting and assembling.\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting): non-manifold meshes, wrong scale, parts that are still too big, dowels in thin walls and more.\n- [Version history](#version-history): what each release contained.\n\n## Good to know before you start\n\n- The model must be a mesh object. If an imported file puts the mesh under an empty parent, BedSplit finds the only mesh selected, or the only mesh under the active object.\n- The original is never changed. The parts are new objects in a collection named after the source.\n- Everything is done in millimetres. The cutting positions you see are millimetres from the start of the model along each axis.\n\n## Version history\n\n### 0.1.3 (13 November 2026)\n\nThe first public release, tagged v0.1.3 and sold on Gumroad. It needs Blender 4.2.0 or newer. It contains:\n\n- 18 printer presets and a custom bed size.\n- **Resize for print**.\n- **Split to Bed** with automatic cut planes along X, Y and Z.\n- **Find Cuts**, with planes drawn in the viewport, editable positions, **Add Cut** and **Remove Cut**.\n- Round dowel sockets with settings for diameter, depth, clearance and dowels per joint.\n- Repair of holes, flipped normals, overlapping shells and non-manifold geometry before cutting.\n- Parts laid flat beside the source, and a **Result** panel with size and checks per part.\n- Export of one STL per part and one dowel file.\n\nThe free [BedSplit Lite](https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fbedsplit-lite\u002Freleases\u002Flatest) covers flat cuts without dowels, repair or cut preview.\n\n## Related\n\n- Product page: [BedSplit](\u002Faddons\u002Fbedsplit)\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting)\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing), manual method first, then the add-on\n",{"title":1082,"description":1271},"docs\u002Fbedsplit\u002Findex","tjJjN81j9LymHr9SmPn8BS2C538P_Rg891o4joq2Ybw",{"id":1279,"title":1280,"addon":424,"body":1281,"description":1493,"extension":402,"meta":1494,"navigation":407,"order":386,"path":293,"rawbody":1495,"seo":1496,"stem":1497,"updated":416,"__hash__":1498},"docs\u002Fdocs\u002Fbedsplit\u002Finstall.md","Install BedSplit in Blender",{"type":8,"value":1282,"toc":1484},[1283,1285,1288,1292,1314,1318,1336,1343,1347,1353,1357,1363,1367,1373,1455,1468,1470],[11,1284,283],{"id":282},[16,1286,1287],{},"BedSplit is a Blender extension and needs Blender 4.2.0 or newer. It was tested on 4.2, 4.5 and 5.2. The add-on is licensed GPL-3.0-or-later. Its only permission request is writing files, which it uses for the STL export.",[11,1289,1291],{"id":1290},"install-from-disk","Install from disk",[443,1293,1294,1297,1302,1308,1311],{},[35,1295,1296],{},"Download the zip after your purchase. Do not unzip it.",[35,1298,1299,1300,89],{},"In Blender open ",[27,1301,848],{},[35,1303,1304,1305,89],{},"Open the small arrow menu at the top right and choose ",[27,1306,1307],{},"Install from Disk",[35,1309,1310],{},"Pick the downloaded zip file and confirm.",[35,1312,1313],{},"Make sure the extension is enabled in the list.",[11,1315,1317],{"id":1316},"where-the-panel-appears","Where the panel appears",[16,1319,1320,1321,1323,1324,1326,1327,1329,1330,1332,1333,1335],{},"Open a 3D Viewport, press ",[27,1322,483],{}," to show the sidebar, and click the ",[27,1325,406],{}," tab. The tab holds two panels: ",[27,1328,406],{}," with the settings and the ",[27,1331,29],{}," button, and below it a ",[27,1334,1039],{}," panel whose title also shows the installed version, for example \"Result  ·  BedSplit v0.1.3\".",[16,1337,1338,1339,1342],{},"The panels are only shown in ",[27,1340,1341],{},"Object Mode",". If the tab seems missing, leave Edit Mode first.",[11,1344,1346],{"id":1345},"update","Update",[16,1348,1349,1350,1352],{},"Download the new zip and install it from disk in the same way, then check the version in the title of the ",[27,1351,1039],{}," panel. Updates are free.",[11,1354,1356],{"id":1355},"uninstall","Uninstall",[16,1358,1359,1360,1362],{},"Open ",[27,1361,848],{},", find BedSplit in the list, and remove it. Parts and dowels you already created are ordinary objects and stay in your scene.",[11,1364,1366],{"id":1365},"lite-versus-the-full-version","Lite versus the full version",[16,1368,1369,1370,1372],{},"BedSplit Lite is a separate free extension with its own tab named ",[27,1371,1238],{},". You can have both installed.",[105,1374,1375,1387],{},[108,1376,1377],{},[111,1378,1379,1382,1385],{},[114,1380,1381],{},"Feature",[114,1383,1384],{},"Lite",[114,1386,406],{},[121,1388,1389,1399,1407,1416,1425,1435,1445],{},[111,1390,1391,1394,1397],{},[126,1392,1393],{},"Printer presets and custom bed size",[126,1395,1396],{},"yes",[126,1398,1396],{},[111,1400,1401,1403,1405],{},[126,1402,189],{},[126,1404,1396],{},[126,1406,1396],{},[111,1408,1409,1412,1414],{},[126,1410,1411],{},"Split to Bed with flat cuts, closed parts",[126,1413,1396],{},[126,1415,1396],{},[111,1417,1418,1421,1423],{},[126,1419,1420],{},"Parts laid flat, per-part STL export",[126,1422,1396],{},[126,1424,1396],{},[111,1426,1427,1430,1433],{},[126,1428,1429],{},"Dowels and sockets, dowel settings",[126,1431,1432],{},"no",[126,1434,1396],{},[111,1436,1437,1440,1443],{},[126,1438,1439],{},"Mesh repair (holes, normals, overlapping shells, AI meshes)",[126,1441,1442],{},"no, watertight meshes only",[126,1444,1396],{},[111,1446,1447,1450,1453],{},[126,1448,1449],{},"Find Cuts and movable cut planes",[126,1451,1452],{},"no, automatic cuts only",[126,1454,1396],{},[16,1456,1457,1458,1461,1462,1464,1465,89],{},"Get Lite from the ",[85,1459,316],{"href":313,"rel":1460},[315],". Next: the ",[85,1463,88],{"href":87}," or the ",[85,1466,1467],{"href":362},"workflows",[11,1469,1243],{"id":1242},[32,1471,1472,1476,1480],{},[35,1473,1248,1474],{},[85,1475,406],{"href":408},[35,1477,1478],{},[85,1479,369],{"href":368},[35,1481,378,1482],{},[85,1483,382],{"href":381},{"title":385,"searchDepth":386,"depth":386,"links":1485},[1486,1487,1488,1489,1490,1491,1492],{"id":282,"depth":386,"text":283},{"id":1290,"depth":386,"text":1291},{"id":1316,"depth":386,"text":1317},{"id":1345,"depth":386,"text":1346},{"id":1355,"depth":386,"text":1356},{"id":1365,"depth":386,"text":1366},{"id":1242,"depth":386,"text":1243},"Install the BedSplit extension from disk in Blender 4.2 or newer, find the BedSplit tab, update or uninstall it, and see how it differs from BedSplit Lite.",{},"---\ntitle: \"Install BedSplit in Blender\"\ndescription: \"Install the BedSplit extension from disk in Blender 4.2 or newer, find the BedSplit tab, update or uninstall it, and see how it differs from BedSplit Lite.\"\naddon: bedsplit\norder: 2\nupdated: 2026-11-16\n---\n\n## Requirements\n\nBedSplit is a Blender extension and needs Blender 4.2.0 or newer. It was tested on 4.2, 4.5 and 5.2. The add-on is licensed GPL-3.0-or-later. Its only permission request is writing files, which it uses for the STL export.\n\n## Install from disk\n\n1. Download the zip after your purchase. Do not unzip it.\n2. In Blender open **Edit > Preferences > Get Extensions**.\n3. Open the small arrow menu at the top right and choose **Install from Disk**.\n4. Pick the downloaded zip file and confirm.\n5. Make sure the extension is enabled in the list.\n\n## Where the panel appears\n\nOpen a 3D Viewport, press **N** to show the sidebar, and click the **BedSplit** tab. The tab holds two panels: **BedSplit** with the settings and the **Split to Bed** button, and below it a **Result** panel whose title also shows the installed version, for example \"Result  ·  BedSplit v0.1.3\".\n\nThe panels are only shown in **Object Mode**. If the tab seems missing, leave Edit Mode first.\n\n## Update\n\nDownload the new zip and install it from disk in the same way, then check the version in the title of the **Result** panel. Updates are free.\n\n## Uninstall\n\nOpen **Edit > Preferences > Get Extensions**, find BedSplit in the list, and remove it. Parts and dowels you already created are ordinary objects and stay in your scene.\n\n## Lite versus the full version\n\nBedSplit Lite is a separate free extension with its own tab named **BedSplit Lite**. You can have both installed.\n\n| Feature | Lite | BedSplit |\n|---|---|---|\n| Printer presets and custom bed size | yes | yes |\n| Resize for print | yes | yes |\n| Split to Bed with flat cuts, closed parts | yes | yes |\n| Parts laid flat, per-part STL export | yes | yes |\n| Dowels and sockets, dowel settings | no | yes |\n| Mesh repair (holes, normals, overlapping shells, AI meshes) | no, watertight meshes only | yes |\n| Find Cuts and movable cut planes | no, automatic cuts only | yes |\n\nGet Lite from the [BedSplit Lite releases page](https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fbedsplit-lite\u002Freleases\u002Flatest). Next: the [panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel) or the [workflows](\u002Fdocs\u002Fbedsplit\u002Fworkflows).\n\n## Related\n\n- Product page: [BedSplit](\u002Faddons\u002Fbedsplit)\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting)\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing)\n",{"title":1280,"description":1493},"docs\u002Fbedsplit\u002Finstall","UW_fypjoS1jOwhTiAcAZXJ9mKD9W0xT9xfs3aaQxEBU",{"id":1500,"title":1501,"addon":424,"body":1502,"description":2209,"extension":402,"meta":2210,"navigation":407,"order":1269,"path":87,"rawbody":2211,"seo":2212,"stem":2213,"updated":416,"__hash__":2214},"docs\u002Fdocs\u002Fbedsplit\u002Fpanel.md","BedSplit panel reference",{"type":8,"value":1503,"toc":2196},[1504,1508,1523,1527,1592,1595,1597,1750,1756,1760,1807,1810,1814,1869,1872,1889,1892,1914,1918,1976,1979,1993,1996,2002,2019,2022,2025,2029,2032,2085,2088,2169,2172,2175,2180,2182],[11,1505,1507],{"id":1506},"where-everything-is","Where everything is",[16,1509,1510,1511,1513,1514,1516,1517,1519,1520,1522],{},"All controls live in the ",[27,1512,406],{}," tab of the 3D Viewport sidebar (press ",[27,1515,483],{},"), in Object Mode. The tab has two panels: ",[27,1518,406],{}," (settings and the split button) and ",[27,1521,1039],{}," (what the last split produced and the export button). If no mesh is selected the top of the panel says \"Select a mesh object\".",[11,1524,1526],{"id":1525},"printer","Printer",[105,1528,1529,1542],{},[108,1530,1531],{},[111,1532,1533,1536,1539],{},[114,1534,1535],{},"Control",[114,1537,1538],{},"What it does",[114,1540,1541],{},"Default and range",[121,1543,1544,1555,1570,1582],{},[111,1545,1546,1549,1552],{},[126,1547,1548],{},"Printer (dropdown)",[126,1550,1551],{},"Chooses the build volume. Each entry shows its name and width × depth × height in millimetres.",[126,1553,1554],{},"Creality Ender 3 \u002F V3 SE (220 × 220 × 250)",[111,1556,1557,1560,1567],{},[126,1558,1559],{},"Custom size",[126,1561,1562,1563,1566],{},"Last entry of the dropdown. Shows the ",[27,1564,1565],{},"Bed"," fields so you can type your own size.",[126,1568,1569],{},"Off",[111,1571,1572,1574,1579],{},[126,1573,1565],{},[126,1575,1576,1577,89],{},"Width, depth and print height in millimetres. Visible only with ",[27,1578,1559],{},[126,1580,1581],{},"220, 220, 250. Minimum 40 each",[111,1583,1584,1587,1590],{},[126,1585,1586],{},"Bed: ... mm",[126,1588,1589],{},"Read-only line that repeats the size in use.",[126,1591],{},[16,1593,1594],{},"Changing the printer or the bed size clears the cut list, so the cuts are found again for the new bed.",[1185,1596,100],{"id":99},[105,1598,1599,1608],{},[108,1600,1601],{},[111,1602,1603,1605],{},[114,1604,1526],{},[114,1606,1607],{},"Width × depth × height, mm",[121,1609,1610,1618,1626,1634,1641,1649,1657,1665,1673,1680,1688,1696,1703,1711,1719,1727,1734,1742],{},[111,1611,1612,1615],{},[126,1613,1614],{},"Bambu Lab A1 mini",[126,1616,1617],{},"180 × 180 × 180",[111,1619,1620,1623],{},[126,1621,1622],{},"Bambu Lab A1 \u002F P1 \u002F X1",[126,1624,1625],{},"256 × 256 × 256",[111,1627,1628,1631],{},[126,1629,1630],{},"Bambu Lab H2D",[126,1632,1633],{},"350 × 320 × 325",[111,1635,1636,1639],{},[126,1637,1638],{},"Prusa MINI+",[126,1640,1617],{},[111,1642,1643,1646],{},[126,1644,1645],{},"Prusa MK4 \u002F MK3",[126,1647,1648],{},"250 × 210 × 220",[111,1650,1651,1654],{},[126,1652,1653],{},"Prusa XL",[126,1655,1656],{},"360 × 360 × 360",[111,1658,1659,1662],{},[126,1660,1661],{},"Prusa CORE One",[126,1663,1664],{},"250 × 220 × 270",[111,1666,1667,1670],{},[126,1668,1669],{},"Creality Ender 3 \u002F V3 SE",[126,1671,1672],{},"220 × 220 × 250",[111,1674,1675,1678],{},[126,1676,1677],{},"Creality K1",[126,1679,1672],{},[111,1681,1682,1685],{},[126,1683,1684],{},"Creality K1 Max",[126,1686,1687],{},"300 × 300 × 300",[111,1689,1690,1693],{},[126,1691,1692],{},"Creality Ender 5 Plus",[126,1694,1695],{},"350 × 350 × 400",[111,1697,1698,1701],{},[126,1699,1700],{},"Anycubic Kobra 2",[126,1702,1672],{},[111,1704,1705,1708],{},[126,1706,1707],{},"Anycubic Kobra 3",[126,1709,1710],{},"250 × 250 × 260",[111,1712,1713,1716],{},[126,1714,1715],{},"Elegoo Neptune 4",[126,1717,1718],{},"225 × 225 × 265",[111,1720,1721,1724],{},[126,1722,1723],{},"Elegoo Neptune 4 Max",[126,1725,1726],{},"420 × 420 × 480",[111,1728,1729,1732],{},[126,1730,1731],{},"Sovol SV06",[126,1733,1672],{},[111,1735,1736,1739],{},[126,1737,1738],{},"Voron 2.4 300",[126,1740,1741],{},"300 × 300 × 280",[111,1743,1744,1747],{},[126,1745,1746],{},"Voron 0.2",[126,1748,1749],{},"120 × 120 × 120",[16,1751,1752,1753,1755],{},"The presets are the nominal build volumes. If your machine has a smaller usable area, choose ",[27,1754,1559],{}," and type a smaller bed.",[11,1757,1759],{"id":1758},"model-size","Model size",[105,1761,1762,1772],{},[108,1763,1764],{},[111,1765,1766,1768,1770],{},[114,1767,1535],{},[114,1769,1538],{},[114,1771,1541],{},[121,1773,1774,1784,1793],{},[111,1775,1776,1779,1782],{},[126,1777,1778],{},"Now: ... mm longest side",[126,1780,1781],{},"Read-only. The longest side of the selected object, taken from its dimensions and the scene unit scale.",[126,1783],{},[111,1785,1786,1788,1791],{},[126,1787,189],{},[126,1789,1790],{},"Off: the model is printed at its current size (scene unit scale applied). On: the parts are scaled so the longest side of the whole model has the size below.",[126,1792,1569],{},[111,1794,1795,1798,1804],{},[126,1796,1797],{},"Longest side, mm",[126,1799,1800,1801,1803],{},"Printed size of the longest side of the whole model. Greyed out unless ",[27,1802,189],{}," is on.",[126,1805,1806],{},"400. Minimum 10",[16,1808,1809],{},"Changing either control clears the cut list.",[11,1811,1813],{"id":1812},"cuts","Cuts",[105,1815,1816,1826],{},[108,1817,1818],{},[111,1819,1820,1822,1824],{},[114,1821,1535],{},[114,1823,1538],{},[114,1825,1541],{},[121,1827,1828,1837,1848,1859],{},[111,1829,1830,1832,1835],{},[126,1831,49],{},[126,1833,1834],{},"Places the cut planes automatically for the chosen printer and draws them in the viewport. Reports how many cuts were found, or that the model fits the bed and no cut is needed.",[126,1836],{},[111,1838,1839,1842,1845],{},[126,1840,1841],{},"Show cuts in viewport",[126,1843,1844],{},"Shows or hides the planes in the viewport. Appears once a cut list exists.",[126,1846,1847],{},"On",[111,1849,1850,1853,1856],{},[126,1851,1852],{},"Cut row: axis, position, X",[126,1854,1855],{},"One row per plane. The label is X, Y or Z. The number is the distance in millimetres from the start of the model along that axis. The X button removes the plane.",[126,1857,1858],{},"Position 0 or more",[111,1860,1861,1864,1867],{},[126,1862,1863],{},"Add cut: X Y Z",[126,1865,1866],{},"Adds a plane across that axis in the middle of the largest remaining piece.",[126,1868],{},[16,1870,1871],{},"Status lines in this box:",[32,1873,1874,1883],{},[35,1875,1876,1879,1880,1882],{},[27,1877,1878],{},"Automatic",": no cut list yet. ",[27,1881,29],{}," will find the cuts itself.",[35,1884,1885,1888],{},[27,1886,1887],{},"No cuts: model fits the bed",": the automatic search found nothing to cut.",[16,1890,1891],{},"Rules worth knowing:",[32,1893,1894,1897,1902,1908],{},[35,1895,1896],{},"Planes closer than 0.5 mm to an end of the model, or within 0.5 mm of another plane on the same axis, are ignored.",[35,1898,1899,1900,89],{},"The list belongs to one object at one position and size. If you move, rotate or scale the object, or change the size settings, the list is dropped and the panel returns to ",[27,1901,1878],{},[35,1903,1904,1905,1907],{},"When a cut list exists, ",[27,1906,29],{}," uses exactly that list. Moving a plane while it is hidden shows it again.",[35,1909,1910,1911,1913],{},"A manual cut list is not checked against the bed. The ",[27,1912,1039],{}," panel tells you afterwards if a part is still too big.",[11,1915,1917],{"id":1916},"dowels","Dowels",[105,1919,1920,1930],{},[108,1921,1922],{},[111,1923,1924,1926,1928],{},[114,1925,1535],{},[114,1927,1538],{},[114,1929,1541],{},[121,1931,1932,1943,1954,1965],{},[111,1933,1934,1937,1940],{},[126,1935,1936],{},"Dowel diameter, mm",[126,1938,1939],{},"Diameter of the dowel.",[126,1941,1942],{},"6.0, range 2 to 20",[111,1944,1945,1948,1951],{},[126,1946,1947],{},"Depth in each part, mm",[126,1949,1950],{},"How far the dowel goes into each part. The dowel is twice this long.",[126,1952,1953],{},"6.0, range 2 to 30",[111,1955,1956,1959,1962],{},[126,1957,1958],{},"Clearance, mm",[126,1960,1961],{},"Gap between dowel and socket. 0.2 suits most printers. Raise it when the dowels do not go in.",[126,1963,1964],{},"0.2, range 0 to 1",[111,1966,1967,1970,1973],{},[126,1968,1969],{},"Dowels per joint",[126,1971,1972],{},"The largest number of dowels placed on one cut face.",[126,1974,1975],{},"2, range 1 to 3",[16,1977,1978],{},"How the sockets are placed:",[32,1980,1981,1984,1987,1990],{},[35,1982,1983],{},"The socket is as wide as the dowel plus the clearance on every side, and as deep as the depth plus the clearance.",[35,1985,1986],{},"At least 1.6 mm of material must remain around a socket in both parts. With the default dowel that means a section roughly 10 mm across; thinner walls get no dowel.",[35,1988,1989],{},"Dowels on the same joint are kept at least three dowel diameters apart.",[35,1991,1992],{},"Every separate patch of a cut face is treated on its own, so a joint with two limbs can get dowels in both.",[11,1994,29],{"id":1995},"split-to-bed",[16,1997,1998,1999,2001],{},"The large button at the bottom of the ",[27,2000,406],{}," panel. It:",[443,2003,2004,2007,2010,2013,2016],{},[35,2005,2006],{},"Reads the mesh (including modifiers) in world axes, scaled to millimetres.",[35,2008,2009],{},"Repairs it if needed.",[35,2011,2012],{},"Cuts it along the cut list, or along automatically chosen planes.",[35,2014,2015],{},"Adds sockets and checks every part.",[35,2017,2018],{},"Turns each part so its largest cut face lies on the ground that still fits the bed, and places the parts in a square grid beside the model with a 15 mm gap.",[16,2020,2021],{},"The result is a collection named \"BedSplit - \" followed by the source name. Parts are named like \"Knight part 01\" and each has its own colour, repeated after eight. All dowels are one extra object named like \"Knight dowel x6\", where the number is how many to print. The original model is unchanged and stays active. The parts are selected. The cuts are hidden after the split. A new split of the same source replaces the previous collection. Undo removes the split.",[16,2023,2024],{},"The button is available only in Object Mode with a mesh. If the model already fits the bed and there are no cuts, you get \"the model fits the bed, nothing to split. Add a cut to split it anyway\".",[11,2026,2028],{"id":2027},"result-panel","Result panel",[16,2030,2031],{},"The title shows the add-on version. Before any split it says \"No result yet\". After a split it shows:",[105,2033,2034,2044],{},[108,2035,2036],{},[111,2037,2038,2041],{},[114,2039,2040],{},"Line",[114,2042,2043],{},"Meaning",[121,2045,2046,2054,2062,2070,2078],{},[111,2047,2048,2051],{},[126,2049,2050],{},"N parts, M dowels",[126,2052,2053],{},"Count of parts and of dowels to print. A check mark means the parts are closed and fit the bed.",[111,2055,2056,2059],{},[126,2057,2058],{},"Source name and seconds",[126,2060,2061],{},"Which object was split and how long it took.",[111,2063,2064,2067],{},[126,2065,2066],{},"Messages",[126,2068,2069],{},"What was repaired and what needs attention (see below).",[111,2071,2072,2075],{},[126,2073,2074],{},"Part n: W × D × H mm",[126,2076,2077],{},"One row per part, with a check mark when it fits the bed and is closed.",[111,2079,2080,2082],{},[126,2081,289],{},[126,2083,2084],{},"Opens a folder chooser.",[16,2086,2087],{},"Possible messages:",[105,2089,2090,2099],{},[108,2091,2092],{},[111,2093,2094,2097],{},[114,2095,2096],{},"Message",[114,2098,2043],{},[121,2100,2101,2109,2117,2125,2133,2144,2153,2161],{},[111,2102,2103,2106],{},[126,2104,2105],{},"Repaired: holes closed, normals fixed",[126,2107,2108],{},"Light repair was enough.",[111,2110,2111,2114],{},[126,2112,2113],{},"Repaired: overlapping shells joined",[126,2115,2116],{},"Several overlapping shells were merged into one solid.",[111,2118,2119,2122],{},[126,2120,2121],{},"Repaired: surface rebuilt (within x mm)",[126,2123,2124],{},"The surface was rebuilt. The detail stayed within x mm.",[111,2126,2127,2130],{},[126,2128,2129],{},"Heavy repair: surface rebuilt, fine detail smoothed (x mm)",[126,2131,2132],{},"The rebuild moved the surface by more than 0.5 mm for 99 percent of it. Check the result.",[111,2134,2135,2138],{},[126,2136,2137],{},"N part(s) not watertight: move a cut plane and split again",[126,2139,2140,2141,89],{},"See ",[85,2142,2143],{"href":368},"troubleshooting",[111,2145,2146,2149],{},[126,2147,2148],{},"N part(s) larger than the bed: add a cut plane",[126,2150,2140,2151,89],{},[85,2152,2143],{"href":368},[111,2154,2155,2158],{},[126,2156,2157],{},"N joint(s) without dowel (wall too thin): glue these",[126,2159,2160],{},"Those joints are flat cuts only.",[111,2162,2163,2166],{},[126,2164,2165],{},"A dowel socket came out wrong: check the joints",[126,2167,2168],{},"Inspect the sockets before printing.",[11,2170,289],{"id":2171},"export-stl",[16,2173,2174],{},"Saves every part of the last split as a binary STL in millimetres, plus one dowel file. File names come from the object names, with spaces and unusual characters replaced by underscores, so the dowel file keeps its count, for example \"Knight_dowel_x6.stl\". The button needs a result in the scene. If you cancel the folder chooser or leave it empty you get \"choose a folder\". The folder is created if it does not exist.",[16,2176,2177,2178,89],{},"For use of these controls in order, see the ",[85,2179,1467],{"href":362},[11,2181,1243],{"id":1242},[32,2183,2184,2188,2192],{},[35,2185,1248,2186],{},[85,2187,406],{"href":408},[35,2189,2190],{},[85,2191,369],{"href":368},[35,2193,378,2194],{},[85,2195,382],{"href":381},{"title":385,"searchDepth":386,"depth":386,"links":2197},[2198,2199,2202,2203,2204,2205,2206,2207,2208],{"id":1506,"depth":386,"text":1507},{"id":1525,"depth":386,"text":1526,"children":2200},[2201],{"id":99,"depth":1269,"text":100},{"id":1758,"depth":386,"text":1759},{"id":1812,"depth":386,"text":1813},{"id":1916,"depth":386,"text":1917},{"id":1995,"depth":386,"text":29},{"id":2027,"depth":386,"text":2028},{"id":2171,"depth":386,"text":289},{"id":1242,"depth":386,"text":1243},"Every BedSplit control with its default and range: printer presets, Resize for print, cut planes, dowels, Split to Bed, the Result panel and STL export.",{},"---\ntitle: \"BedSplit panel reference\"\ndescription: \"Every BedSplit control with its default and range: printer presets, Resize for print, cut planes, dowels, Split to Bed, the Result panel and STL export.\"\naddon: bedsplit\norder: 3\nupdated: 2026-11-16\n---\n\n## Where everything is\n\nAll controls live in the **BedSplit** tab of the 3D Viewport sidebar (press **N**), in Object Mode. The tab has two panels: **BedSplit** (settings and the split button) and **Result** (what the last split produced and the export button). If no mesh is selected the top of the panel says \"Select a mesh object\".\n\n## Printer\n\n| Control | What it does | Default and range |\n|---|---|---|\n| Printer (dropdown) | Chooses the build volume. Each entry shows its name and width × depth × height in millimetres. | Creality Ender 3 \u002F V3 SE (220 × 220 × 250) |\n| Custom size | Last entry of the dropdown. Shows the **Bed** fields so you can type your own size. | Off |\n| Bed | Width, depth and print height in millimetres. Visible only with **Custom size**. | 220, 220, 250. Minimum 40 each |\n| Bed: ... mm | Read-only line that repeats the size in use. | |\n\nChanging the printer or the bed size clears the cut list, so the cuts are found again for the new bed.\n\n### Printer presets\n\n| Printer | Width × depth × height, mm |\n|---|---|\n| Bambu Lab A1 mini | 180 × 180 × 180 |\n| Bambu Lab A1 \u002F P1 \u002F X1 | 256 × 256 × 256 |\n| Bambu Lab H2D | 350 × 320 × 325 |\n| Prusa MINI+ | 180 × 180 × 180 |\n| Prusa MK4 \u002F MK3 | 250 × 210 × 220 |\n| Prusa XL | 360 × 360 × 360 |\n| Prusa CORE One | 250 × 220 × 270 |\n| Creality Ender 3 \u002F V3 SE | 220 × 220 × 250 |\n| Creality K1 | 220 × 220 × 250 |\n| Creality K1 Max | 300 × 300 × 300 |\n| Creality Ender 5 Plus | 350 × 350 × 400 |\n| Anycubic Kobra 2 | 220 × 220 × 250 |\n| Anycubic Kobra 3 | 250 × 250 × 260 |\n| Elegoo Neptune 4 | 225 × 225 × 265 |\n| Elegoo Neptune 4 Max | 420 × 420 × 480 |\n| Sovol SV06 | 220 × 220 × 250 |\n| Voron 2.4 300 | 300 × 300 × 280 |\n| Voron 0.2 | 120 × 120 × 120 |\n\nThe presets are the nominal build volumes. If your machine has a smaller usable area, choose **Custom size** and type a smaller bed.\n\n## Model size\n\n| Control | What it does | Default and range |\n|---|---|---|\n| Now: ... mm longest side | Read-only. The longest side of the selected object, taken from its dimensions and the scene unit scale. | |\n| Resize for print | Off: the model is printed at its current size (scene unit scale applied). On: the parts are scaled so the longest side of the whole model has the size below. | Off |\n| Longest side, mm | Printed size of the longest side of the whole model. Greyed out unless **Resize for print** is on. | 400. Minimum 10 |\n\nChanging either control clears the cut list.\n\n## Cuts\n\n| Control | What it does | Default and range |\n|---|---|---|\n| Find Cuts | Places the cut planes automatically for the chosen printer and draws them in the viewport. Reports how many cuts were found, or that the model fits the bed and no cut is needed. | |\n| Show cuts in viewport | Shows or hides the planes in the viewport. Appears once a cut list exists. | On |\n| Cut row: axis, position, X | One row per plane. The label is X, Y or Z. The number is the distance in millimetres from the start of the model along that axis. The X button removes the plane. | Position 0 or more |\n| Add cut: X Y Z | Adds a plane across that axis in the middle of the largest remaining piece. | |\n\nStatus lines in this box:\n\n- **Automatic**: no cut list yet. **Split to Bed** will find the cuts itself.\n- **No cuts: model fits the bed**: the automatic search found nothing to cut.\n\nRules worth knowing:\n\n- Planes closer than 0.5 mm to an end of the model, or within 0.5 mm of another plane on the same axis, are ignored.\n- The list belongs to one object at one position and size. If you move, rotate or scale the object, or change the size settings, the list is dropped and the panel returns to **Automatic**.\n- When a cut list exists, **Split to Bed** uses exactly that list. Moving a plane while it is hidden shows it again.\n- A manual cut list is not checked against the bed. The **Result** panel tells you afterwards if a part is still too big.\n\n## Dowels\n\n| Control | What it does | Default and range |\n|---|---|---|\n| Dowel diameter, mm | Diameter of the dowel. | 6.0, range 2 to 20 |\n| Depth in each part, mm | How far the dowel goes into each part. The dowel is twice this long. | 6.0, range 2 to 30 |\n| Clearance, mm | Gap between dowel and socket. 0.2 suits most printers. Raise it when the dowels do not go in. | 0.2, range 0 to 1 |\n| Dowels per joint | The largest number of dowels placed on one cut face. | 2, range 1 to 3 |\n\nHow the sockets are placed:\n\n- The socket is as wide as the dowel plus the clearance on every side, and as deep as the depth plus the clearance.\n- At least 1.6 mm of material must remain around a socket in both parts. With the default dowel that means a section roughly 10 mm across; thinner walls get no dowel.\n- Dowels on the same joint are kept at least three dowel diameters apart.\n- Every separate patch of a cut face is treated on its own, so a joint with two limbs can get dowels in both.\n\n## Split to Bed\n\nThe large button at the bottom of the **BedSplit** panel. It:\n\n1. Reads the mesh (including modifiers) in world axes, scaled to millimetres.\n2. Repairs it if needed.\n3. Cuts it along the cut list, or along automatically chosen planes.\n4. Adds sockets and checks every part.\n5. Turns each part so its largest cut face lies on the ground that still fits the bed, and places the parts in a square grid beside the model with a 15 mm gap.\n\nThe result is a collection named \"BedSplit - \" followed by the source name. Parts are named like \"Knight part 01\" and each has its own colour, repeated after eight. All dowels are one extra object named like \"Knight dowel x6\", where the number is how many to print. The original model is unchanged and stays active. The parts are selected. The cuts are hidden after the split. A new split of the same source replaces the previous collection. Undo removes the split.\n\nThe button is available only in Object Mode with a mesh. If the model already fits the bed and there are no cuts, you get \"the model fits the bed, nothing to split. Add a cut to split it anyway\".\n\n## Result panel\n\nThe title shows the add-on version. Before any split it says \"No result yet\". After a split it shows:\n\n| Line | Meaning |\n|---|---|\n| N parts, M dowels | Count of parts and of dowels to print. A check mark means the parts are closed and fit the bed. |\n| Source name and seconds | Which object was split and how long it took. |\n| Messages | What was repaired and what needs attention (see below). |\n| Part n: W × D × H mm | One row per part, with a check mark when it fits the bed and is closed. |\n| Export STL | Opens a folder chooser. |\n\nPossible messages:\n\n| Message | Meaning |\n|---|---|\n| Repaired: holes closed, normals fixed | Light repair was enough. |\n| Repaired: overlapping shells joined | Several overlapping shells were merged into one solid. |\n| Repaired: surface rebuilt (within x mm) | The surface was rebuilt. The detail stayed within x mm. |\n| Heavy repair: surface rebuilt, fine detail smoothed (x mm) | The rebuild moved the surface by more than 0.5 mm for 99 percent of it. Check the result. |\n| N part(s) not watertight: move a cut plane and split again | See [troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting). |\n| N part(s) larger than the bed: add a cut plane | See [troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting). |\n| N joint(s) without dowel (wall too thin): glue these | Those joints are flat cuts only. |\n| A dowel socket came out wrong: check the joints | Inspect the sockets before printing. |\n\n## Export STL\n\nSaves every part of the last split as a binary STL in millimetres, plus one dowel file. File names come from the object names, with spaces and unusual characters replaced by underscores, so the dowel file keeps its count, for example \"Knight_dowel_x6.stl\". The button needs a result in the scene. If you cancel the folder chooser or leave it empty you get \"choose a folder\". The folder is created if it does not exist.\n\nFor use of these controls in order, see the [workflows](\u002Fdocs\u002Fbedsplit\u002Fworkflows).\n\n## Related\n\n- Product page: [BedSplit](\u002Faddons\u002Fbedsplit)\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting)\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing)\n",{"title":1501,"description":2209},"docs\u002Fbedsplit\u002Fpanel","9LR1YfdGfQtcVv74et-6DYMMIs4tZpKUNwbp2xOr_5w",{"id":2216,"title":2217,"addon":424,"body":2218,"description":2477,"extension":402,"meta":2478,"navigation":407,"order":2479,"path":362,"rawbody":2480,"seo":2481,"stem":2482,"updated":416,"__hash__":2483},"docs\u002Fdocs\u002Fbedsplit\u002Fworkflows.md","BedSplit workflows: model to printed parts",{"type":8,"value":2219,"toc":2468},[2220,2224,2227,2265,2268,2272,2275,2303,2309,2314,2318,2324,2351,2357,2361,2370,2381,2384,2388,2407,2410,2414,2417,2443,2452,2454],[11,2221,2223],{"id":2222},"fit-a-figure-to-a-220-mm-bed","Fit a figure to a 220 mm bed",[16,2225,2226],{},"Say you have a 600 mm tall statue and an Ender 3 class printer.",[443,2228,2229,2237,2243,2255,2259],{},[35,2230,2231,2232,484,2234,2236],{},"Select the statue in Object Mode. Press ",[27,2233,483],{},[27,2235,406],{}," tab.",[35,2238,2239,2240,2242],{},"In ",[27,2241,1526],{}," choose \"Creality Ender 3 \u002F V3 SE (220 × 220 × 250)\". This is also the default.",[35,2244,2245,2246,2248,2249,2251,2252,2254],{},"Under ",[27,2247,1759],{}," turn on ",[27,2250,189],{}," and set ",[27,2253,1797],{}," to 600. If the model is already modelled at real size, leave it off. The line \"Now: ... mm longest side\" shows what Blender currently thinks.",[35,2256,719,2257,89],{},[27,2258,29],{},[35,2260,2261,2262,2264],{},"Look at the ",[27,2263,1039],{}," panel. Each part row shows its size and a check mark. The parts sit in a grid beside the model, each lying on a cut face.",[16,2266,2267],{},"Because the bed is 250 mm high, a 600 mm model needs three slabs along its tall axis. BedSplit uses the smallest number of slabs per axis that fits the bed.",[11,2269,2271],{"id":2270},"preview-and-choose-the-cuts","Preview and choose the cuts",[16,2273,2274],{},"Automatic cuts are a starting point. To control where the model is cut:",[443,2276,2277,2285,2288,2291,2298],{},[35,2278,719,2279,2281,2282,2284],{},[27,2280,49],{},". Planes appear in the viewport and a row per plane appears in the ",[27,2283,1813],{}," box.",[35,2286,2287],{},"Read the row: the letter is the axis and the number is millimetres from the start of the model along it.",[35,2289,2290],{},"Edit the number to slide a plane. Typical reasons: keep a cut away from a face, a hand, a thin sword blade, or put a seam where it is easy to hide.",[35,2292,2293,2294,2297],{},"Remove a plane with the X button, or press ",[27,2295,2296],{},"Add cut"," X, Y or Z to add one in the middle of the largest remaining piece, then move it.",[35,2299,719,2300,2302],{},[27,2301,29],{},". It uses your list exactly.",[16,2304,2305,2306,2308],{},"Two things to remember. Your own cut list is not checked against the bed, so if you move a plane too far a part may end up larger than the bed and the result panel will say so. And if you move or scale the source object, or change the printer or size settings, the list is discarded and the panel shows ",[27,2307,1878],{}," again.",[686,2310,2311],{},[16,2312,2313],{},"Tip: if a cut passes through a very thin section, the dowel may not fit there. Slide the plane a few millimetres to a thicker section and split again.",[11,2315,2317],{"id":2316},"add-dowels","Add dowels",[16,2319,2320,2321,2323],{},"Dowels are on by default. The ",[27,2322,1917],{}," box sets them:",[443,2325,2326,2331,2336,2341,2346],{},[35,2327,2328,2330],{},[27,2329,1936],{},": 6 is a good start. A larger dowel is stronger but needs thicker walls.",[35,2332,2333,2335],{},[27,2334,1947],{},": 6 means the dowel is 12 mm long and goes 6 mm into each side.",[35,2337,2338,2340],{},[27,2339,1958],{},": 0.2 suits most printers. If you printed the dowels and they do not enter the sockets, raise it in steps, for example to 0.3, and split again.",[35,2342,2343,2345],{},[27,2344,1969],{},": 2 gives alignment against twisting. Use 1 to keep sockets away from thin areas, or 3 for large faces.",[35,2347,719,2348,2350],{},[27,2349,29],{}," again after any change. The settings are applied during the split, not live.",[16,2352,2353,2354,2356],{},"After the split read the ",[27,2355,1039],{}," panel for a line such as \"N joint(s) without dowel (wall too thin): glue these\". Those joints are plain flat faces.",[11,2358,2360],{"id":2359},"repair-and-check","Repair and check",[16,2362,2363,2364,2366,2367,2369],{},"You do not run a separate repair. ",[27,2365,29],{}," repairs first and reports it in the ",[27,2368,1039],{}," panel:",[32,2371,2372,2375,2378],{},[35,2373,2374],{},"\"Repaired: holes closed, normals fixed\" or \"Repaired: overlapping shells joined\" are mild and keep the shape.",[35,2376,2377],{},"\"Repaired: surface rebuilt (within x mm)\" means the mesh was rebuilt as a new surface, within x millimetres of the original.",[35,2379,2380],{},"\"Heavy repair ... fine detail smoothed\" means the rebuild moved the surface more than 0.5 mm. Compare the parts to the original. If a feature you care about is lost, repair that area in Blender first and split again.",[16,2382,2383],{},"A clean closed mesh with no problems produces no repair message.",[11,2385,2387],{"id":2386},"export-the-stl-files","Export the STL files",[443,2389,2390,2398,2401,2404],{},[35,2391,2392,2393,2395,2396,89],{},"In the ",[27,2394,1039],{}," panel press ",[27,2397,289],{},[35,2399,2400],{},"Choose a folder. It is created if it does not exist.",[35,2402,2403],{},"You get one file per part (for example \"Knight_part_01.stl\") and one dowel file with the count in its name (for example \"Knight_dowel_x6.stl\"). Everything is in millimetres.",[35,2405,2406],{},"In your slicer import the parts. Each part is already oriented with its cut face on the ground, so no extra rotation is usually needed.",[16,2408,2409],{},"If you slice at a different scale than the export, the parts will not match the sockets, so import at 100 percent.",[11,2411,2413],{"id":2412},"print-and-assemble","Print and assemble",[16,2415,2416],{},"Tips that follow from the dowel settings:",[443,2418,2419,2422,2425,2431,2434,2437,2440],{},[35,2420,2421],{},"Print the dowel file as many times as the name says. The count is the number of dowels in the whole model.",[35,2423,2424],{},"Do a test first: print one small joint pair and one dowel and try the fit. Printers differ.",[35,2426,2427,2428,2430],{},"If a dowel is too tight, raise ",[27,2429,1958],{}," and split again. If it is loose, lower it, though 0.2 mm is the setting the add-on was built around.",[35,2432,2433],{},"Dowels are twice the depth in length, with sockets slightly deeper than the half length, so they bottom out with a small gap rather than jamming.",[35,2435,2436],{},"Use glue on the flat faces, and a little in the sockets. The dowels align the parts, the glue holds them.",[35,2438,2439],{},"Dry fit all parts before gluing. Joints with no dowels need to be aligned by eye.",[35,2441,2442],{},"For joints the panel reported as lacking dowels, glue flat faces and clamp.",[16,2444,2140,2445,2447,2448,2451],{},[85,2446,2143],{"href":368}," when something goes wrong, and the guide on ",[85,2449,2450],{"href":381},"splitting a model for 3D printing"," for the manual method.",[11,2453,1243],{"id":1242},[32,2455,2456,2460,2464],{},[35,2457,1248,2458],{},[85,2459,406],{"href":408},[35,2461,2462],{},[85,2463,369],{"href":368},[35,2465,378,2466],{},[85,2467,382],{"href":381},{"title":385,"searchDepth":386,"depth":386,"links":2469},[2470,2471,2472,2473,2474,2475,2476],{"id":2222,"depth":386,"text":2223},{"id":2270,"depth":386,"text":2271},{"id":2316,"depth":386,"text":2317},{"id":2359,"depth":386,"text":2360},{"id":2386,"depth":386,"text":2387},{"id":2412,"depth":386,"text":2413},{"id":1242,"depth":386,"text":1243},"Step-by-step BedSplit workflows: fit a figure to a 220 mm bed, choose cut planes, add dowels, repair and export STL files, and assemble the printed parts.",{},4,"---\ntitle: \"BedSplit workflows: model to printed parts\"\ndescription: \"Step-by-step BedSplit workflows: fit a figure to a 220 mm bed, choose cut planes, add dowels, repair and export STL files, and assemble the printed parts.\"\naddon: bedsplit\norder: 4\nupdated: 2026-11-16\n---\n\n## Fit a figure to a 220 mm bed\n\nSay you have a 600 mm tall statue and an Ender 3 class printer.\n\n1. Select the statue in Object Mode. Press **N** and open the **BedSplit** tab.\n2. In **Printer** choose \"Creality Ender 3 \u002F V3 SE (220 × 220 × 250)\". This is also the default.\n3. Under **Model size** turn on **Resize for print** and set **Longest side, mm** to 600. If the model is already modelled at real size, leave it off. The line \"Now: ... mm longest side\" shows what Blender currently thinks.\n4. Press **Split to Bed**.\n5. Look at the **Result** panel. Each part row shows its size and a check mark. The parts sit in a grid beside the model, each lying on a cut face.\n\nBecause the bed is 250 mm high, a 600 mm model needs three slabs along its tall axis. BedSplit uses the smallest number of slabs per axis that fits the bed.\n\n## Preview and choose the cuts\n\nAutomatic cuts are a starting point. To control where the model is cut:\n\n1. Press **Find Cuts**. Planes appear in the viewport and a row per plane appears in the **Cuts** box.\n2. Read the row: the letter is the axis and the number is millimetres from the start of the model along it.\n3. Edit the number to slide a plane. Typical reasons: keep a cut away from a face, a hand, a thin sword blade, or put a seam where it is easy to hide.\n4. Remove a plane with the X button, or press **Add cut** X, Y or Z to add one in the middle of the largest remaining piece, then move it.\n5. Press **Split to Bed**. It uses your list exactly.\n\nTwo things to remember. Your own cut list is not checked against the bed, so if you move a plane too far a part may end up larger than the bed and the result panel will say so. And if you move or scale the source object, or change the printer or size settings, the list is discarded and the panel shows **Automatic** again.\n\n> Tip: if a cut passes through a very thin section, the dowel may not fit there. Slide the plane a few millimetres to a thicker section and split again.\n\n## Add dowels\n\nDowels are on by default. The **Dowels** box sets them:\n\n1. **Dowel diameter, mm**: 6 is a good start. A larger dowel is stronger but needs thicker walls.\n2. **Depth in each part, mm**: 6 means the dowel is 12 mm long and goes 6 mm into each side.\n3. **Clearance, mm**: 0.2 suits most printers. If you printed the dowels and they do not enter the sockets, raise it in steps, for example to 0.3, and split again.\n4. **Dowels per joint**: 2 gives alignment against twisting. Use 1 to keep sockets away from thin areas, or 3 for large faces.\n5. Press **Split to Bed** again after any change. The settings are applied during the split, not live.\n\nAfter the split read the **Result** panel for a line such as \"N joint(s) without dowel (wall too thin): glue these\". Those joints are plain flat faces.\n\n## Repair and check\n\nYou do not run a separate repair. **Split to Bed** repairs first and reports it in the **Result** panel:\n\n- \"Repaired: holes closed, normals fixed\" or \"Repaired: overlapping shells joined\" are mild and keep the shape.\n- \"Repaired: surface rebuilt (within x mm)\" means the mesh was rebuilt as a new surface, within x millimetres of the original.\n- \"Heavy repair ... fine detail smoothed\" means the rebuild moved the surface more than 0.5 mm. Compare the parts to the original. If a feature you care about is lost, repair that area in Blender first and split again.\n\nA clean closed mesh with no problems produces no repair message.\n\n## Export the STL files\n\n1. In the **Result** panel press **Export STL**.\n2. Choose a folder. It is created if it does not exist.\n3. You get one file per part (for example \"Knight_part_01.stl\") and one dowel file with the count in its name (for example \"Knight_dowel_x6.stl\"). Everything is in millimetres.\n4. In your slicer import the parts. Each part is already oriented with its cut face on the ground, so no extra rotation is usually needed.\n\nIf you slice at a different scale than the export, the parts will not match the sockets, so import at 100 percent.\n\n## Print and assemble\n\nTips that follow from the dowel settings:\n\n1. Print the dowel file as many times as the name says. The count is the number of dowels in the whole model.\n2. Do a test first: print one small joint pair and one dowel and try the fit. Printers differ.\n3. If a dowel is too tight, raise **Clearance, mm** and split again. If it is loose, lower it, though 0.2 mm is the setting the add-on was built around.\n4. Dowels are twice the depth in length, with sockets slightly deeper than the half length, so they bottom out with a small gap rather than jamming.\n5. Use glue on the flat faces, and a little in the sockets. The dowels align the parts, the glue holds them.\n6. Dry fit all parts before gluing. Joints with no dowels need to be aligned by eye.\n7. For joints the panel reported as lacking dowels, glue flat faces and clamp.\n\nSee [troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting) when something goes wrong, and the guide on [splitting a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing) for the manual method.\n\n## Related\n\n- Product page: [BedSplit](\u002Faddons\u002Fbedsplit)\n- [Troubleshooting](\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting)\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing)\n",{"title":2217,"description":2477},"docs\u002Fbedsplit\u002Fworkflows","wHCaJodKU8Sn7ohkvumQWd1lFLj3KNzC_xhcmY7fNXM",{"id":2485,"title":2486,"addon":424,"body":2487,"description":2701,"extension":402,"meta":2702,"navigation":407,"order":2703,"path":368,"rawbody":2704,"seo":2705,"stem":2706,"updated":416,"__hash__":2707},"docs\u002Fdocs\u002Fbedsplit\u002Ftroubleshooting.md","BedSplit troubleshooting",{"type":8,"value":2488,"toc":2683},[2489,2493,2511,2515,2524,2528,2534,2538,2541,2550,2555,2559,2562,2566,2572,2576,2579,2583,2586,2606,2610,2613,2617,2623,2627,2635,2639,2642,2646,2649,2653,2659,2663,2666,2668],[11,2490,2492],{"id":2491},"the-bedsplit-tab-is-missing","The BedSplit tab is missing",[16,2494,2495,2496,2498,2499,2501,2502,2504,2505,2507,2508,89],{},"The panels show only in Object Mode and in a 3D Viewport sidebar. Press ",[27,2497,483],{},", leave Edit Mode, and look for the ",[27,2500,406],{}," tab. If you installed BedSplit Lite, its tab is named ",[27,2503,1238],{},". If neither is there, check ",[27,2506,848],{}," that the extension is enabled. See ",[85,2509,2510],{"href":293},"install",[11,2512,2514],{"id":2513},"the-buttons-are-greyed-out","The buttons are greyed out",[16,2516,2517,304,2519,470,2521,2523],{},[27,2518,49],{},[27,2520,1213],{},[27,2522,29],{}," need Object Mode and a mesh. A mesh imported from glTF often has an empty parent that becomes active. BedSplit then uses the only selected mesh, or the only mesh below the active object. If several meshes are selected, select just one, or join them first.",[11,2525,2527],{"id":2526},"the-model-has-holes-or-is-not-manifold-do-i-need-to-fix-it-first","The model has holes or is not manifold. Do I need to fix it first?",[16,2529,2530,2531,2533],{},"No. The split repairs holes, flipped normals, loose edges and overlapping shells before cutting, and the ",[27,2532,1039],{}," panel tells you what it did. If the mesh was too damaged for a light repair, the surface is rebuilt, and the panel warns \"Heavy repair: surface rebuilt, fine detail smoothed\" when the surface moved by more than 0.5 mm. In that case compare the parts to the original and fix the damaged area by hand if you lose detail you need.",[11,2535,2537],{"id":2536},"it-says-the-model-is-mm-long-and-needs-about-parts-turn-on-resize-for-print","It says \"The model is ... mm long and needs about ... parts. Turn on Resize for print\"",[16,2539,2540],{},"This is the scale check. If the whole model would need more than 64 parts at your bed size, BedSplit stops before cutting anything. The parts are counted as the product of the slabs per axis, so a model that is five bed-widths wide, deep and tall already needs 125. A count that high nearly always means the units are wrong, for example a model in metres read as millimetres, or the reverse. Fix it one of two ways:",[443,2542,2543,2547],{},[35,2544,832,2545,1115],{},[27,2546,189],{},[35,2548,2549],{},"Correct the scene unit scale so the \"Now: ... mm longest side\" line shows the real size.",[16,2551,2552,2553,89],{},"The same message appears from ",[27,2554,49],{},[11,2556,2558],{"id":2557},"the-message-says-the-object-has-no-faces-or-the-object-has-no-size","The message says \"The object has no faces\" or \"The object has no size\"",[16,2560,2561],{},"The selected object is empty, or every vertex is at the same place, or modifiers produce nothing. Check that the object shows a mesh in the viewport.",[11,2563,2565],{"id":2564},"n-parts-larger-than-the-bed-add-a-cut-plane","\"N part(s) larger than the bed: add a cut plane\"",[16,2567,2568,2569,2571],{},"At least one part exceeds the bed on some axis. This most often happens with a hand-made cut list that leaves a piece wider than the bed. Press ",[27,2570,2296],{}," on the axis that is too long, or move a plane so pieces are smaller, then split again. Remember that the printer's height counts too: a piece must fit the print height as well as the width and depth.",[11,2573,2575],{"id":2574},"n-parts-not-watertight-move-a-cut-plane-and-split-again","\"N part(s) not watertight: move a cut plane and split again\"",[16,2577,2578],{},"A cut produced a part the add-on could not close. BedSplit already retries up to five times with the planes nudged by a fraction of a millimetre. If it still fails, slide a plane a few millimetres and split again.",[11,2580,2582],{"id":2581},"some-joints-have-no-dowel","Some joints have no dowel",[16,2584,2585],{},"The message \"N joint(s) without dowel (wall too thin): glue these\" means the cut face is too small or too thin. A socket needs 1.6 mm of wall around it in both parts, so with the default 6 mm dowel and 0.2 mm clearance the section must be about 10 mm across. Options:",[32,2587,2588,2591,2597,2603],{},[35,2589,2590],{},"Move the cut to a thicker place.",[35,2592,2593,2594,2596],{},"Lower ",[27,2595,1936],{},", which lowers the needed wall.",[35,2598,2599,2600,2602],{},"Set ",[27,2601,1969],{}," to 1.",[35,2604,2605],{},"Accept it and glue the flat faces.",[11,2607,2609],{"id":2608},"a-dowel-socket-came-out-wrong-check-the-joints","\"A dowel socket came out wrong: check the joints\"",[16,2611,2612],{},"The built-in check found a socket that either overlaps the dowel or whose gap differs from the clearance. Look at the joints in the viewport, and slide the cut or change the dowel diameter and split again.",[11,2614,2616],{"id":2615},"the-dowels-are-too-tight-or-too-loose","The dowels are too tight, or too loose",[16,2618,2619,2620,2622],{},"The socket is made as wide as the dowel plus the ",[27,2621,1958],{}," on every side. Printers over- or under-extrude, so the same 0.2 mm can behave differently. Print one test joint. If tight, raise the clearance in steps (0.25, 0.3). Re-split to apply it. The range is 0 to 1 mm.",[11,2624,2626],{"id":2625},"split-failed-move-a-cut-plane-and-try-again","\"Split failed ... Move a cut plane and try again\"",[16,2628,2629,2630,2632,2633,89],{},"An unexpected error occurred during cutting. Move a plane a little with ",[27,2631,49],{}," and try again. If it keeps happening on a particular model, send it with your Blender version via the ",[85,2634,327],{"href":326},[11,2636,2638],{"id":2637},"the-result-looks-wrong-or-i-want-to-start-over","The result looks wrong or I want to start over",[16,2640,2641],{},"The split does not change the source. Delete the collection called \"BedSplit - \" plus your model name, or press Undo, or just split again, which replaces the previous result for that source.",[11,2643,2645],{"id":2644},"the-stl-files-do-not-match-my-slicer-scale","The STL files do not match my slicer scale",[16,2647,2648],{},"The files are exported in millimetres. Import them at 100 percent. If your slicer assumes inches, change that setting there.",[11,2650,2652],{"id":2651},"export-stl-is-greyed-out-or-it-says-choose-a-folder","Export STL is greyed out, or it says \"choose a folder\"",[16,2654,2655,2656,2658],{},"The button needs a result in the scene. Run ",[27,2657,29],{}," first. When the folder chooser is closed with no folder, you get \"choose a folder\". If the folder cannot be written the message says \"cannot write the files\".",[11,2660,2662],{"id":2661},"splitting-is-slow","Splitting is slow",[16,2664,2665],{},"Cutting and repair run in Blender's Python, so a mesh with millions of faces keeps Blender busy for a while, and the cursor shows a wait symbol until the result appears. A typical figure finishes in seconds. The slowest case is a broken mesh that needs the voxel rebuild: the add-on tries a fine 0.8 mm grid first and steps up to coarser grids (1.15, 1.6, 2.4, then 3.2 mm) when the rebuilt surface would exceed 600,000 faces. If the wait is long, reduce the polygon count first, for example with a Decimate modifier applied to a copy.",[11,2667,1243],{"id":1242},[32,2669,2670,2674,2679],{},[35,2671,1248,2672],{},[85,2673,406],{"href":408},[35,2675,2676,2678],{},[85,2677,357],{"href":87}," for defaults and ranges",[35,2680,378,2681],{},[85,2682,382],{"href":381},{"title":385,"searchDepth":386,"depth":386,"links":2684},[2685,2686,2687,2688,2689,2690,2691,2692,2693,2694,2695,2696,2697,2698,2699,2700],{"id":2491,"depth":386,"text":2492},{"id":2513,"depth":386,"text":2514},{"id":2526,"depth":386,"text":2527},{"id":2536,"depth":386,"text":2537},{"id":2557,"depth":386,"text":2558},{"id":2564,"depth":386,"text":2565},{"id":2574,"depth":386,"text":2575},{"id":2581,"depth":386,"text":2582},{"id":2608,"depth":386,"text":2609},{"id":2615,"depth":386,"text":2616},{"id":2625,"depth":386,"text":2626},{"id":2637,"depth":386,"text":2638},{"id":2644,"depth":386,"text":2645},{"id":2651,"depth":386,"text":2652},{"id":2661,"depth":386,"text":2662},{"id":1242,"depth":386,"text":1243},"Fix common BedSplit problems: non-manifold or broken meshes, wrong scale or units, parts still larger than the bed, dowels missing in thin walls, tight dowels.",{},8,"---\ntitle: \"BedSplit troubleshooting\"\ndescription: \"Fix common BedSplit problems: non-manifold or broken meshes, wrong scale or units, parts still larger than the bed, dowels missing in thin walls, tight dowels.\"\naddon: bedsplit\norder: 8\nupdated: 2026-11-16\n---\n\n## The BedSplit tab is missing\n\nThe panels show only in Object Mode and in a 3D Viewport sidebar. Press **N**, leave Edit Mode, and look for the **BedSplit** tab. If you installed BedSplit Lite, its tab is named **BedSplit Lite**. If neither is there, check **Edit > Preferences > Get Extensions** that the extension is enabled. See [install](\u002Fdocs\u002Fbedsplit\u002Finstall).\n\n## The buttons are greyed out\n\n**Find Cuts**, **Add Cut** and **Split to Bed** need Object Mode and a mesh. A mesh imported from glTF often has an empty parent that becomes active. BedSplit then uses the only selected mesh, or the only mesh below the active object. If several meshes are selected, select just one, or join them first.\n\n## The model has holes or is not manifold. Do I need to fix it first?\n\nNo. The split repairs holes, flipped normals, loose edges and overlapping shells before cutting, and the **Result** panel tells you what it did. If the mesh was too damaged for a light repair, the surface is rebuilt, and the panel warns \"Heavy repair: surface rebuilt, fine detail smoothed\" when the surface moved by more than 0.5 mm. In that case compare the parts to the original and fix the damaged area by hand if you lose detail you need.\n\n## It says \"The model is ... mm long and needs about ... parts. Turn on Resize for print\"\n\nThis is the scale check. If the whole model would need more than 64 parts at your bed size, BedSplit stops before cutting anything. The parts are counted as the product of the slabs per axis, so a model that is five bed-widths wide, deep and tall already needs 125. A count that high nearly always means the units are wrong, for example a model in metres read as millimetres, or the reverse. Fix it one of two ways:\n\n1. Turn on **Resize for print** and type the real longest side in millimetres.\n2. Correct the scene unit scale so the \"Now: ... mm longest side\" line shows the real size.\n\nThe same message appears from **Find Cuts**.\n\n## The message says \"The object has no faces\" or \"The object has no size\"\n\nThe selected object is empty, or every vertex is at the same place, or modifiers produce nothing. Check that the object shows a mesh in the viewport.\n\n## \"N part(s) larger than the bed: add a cut plane\"\n\nAt least one part exceeds the bed on some axis. This most often happens with a hand-made cut list that leaves a piece wider than the bed. Press **Add cut** on the axis that is too long, or move a plane so pieces are smaller, then split again. Remember that the printer's height counts too: a piece must fit the print height as well as the width and depth.\n\n## \"N part(s) not watertight: move a cut plane and split again\"\n\nA cut produced a part the add-on could not close. BedSplit already retries up to five times with the planes nudged by a fraction of a millimetre. If it still fails, slide a plane a few millimetres and split again.\n\n## Some joints have no dowel\n\nThe message \"N joint(s) without dowel (wall too thin): glue these\" means the cut face is too small or too thin. A socket needs 1.6 mm of wall around it in both parts, so with the default 6 mm dowel and 0.2 mm clearance the section must be about 10 mm across. Options:\n\n- Move the cut to a thicker place.\n- Lower **Dowel diameter, mm**, which lowers the needed wall.\n- Set **Dowels per joint** to 1.\n- Accept it and glue the flat faces.\n\n## \"A dowel socket came out wrong: check the joints\"\n\nThe built-in check found a socket that either overlaps the dowel or whose gap differs from the clearance. Look at the joints in the viewport, and slide the cut or change the dowel diameter and split again.\n\n## The dowels are too tight, or too loose\n\nThe socket is made as wide as the dowel plus the **Clearance, mm** on every side. Printers over- or under-extrude, so the same 0.2 mm can behave differently. Print one test joint. If tight, raise the clearance in steps (0.25, 0.3). Re-split to apply it. The range is 0 to 1 mm.\n\n## \"Split failed ... Move a cut plane and try again\"\n\nAn unexpected error occurred during cutting. Move a plane a little with **Find Cuts** and try again. If it keeps happening on a particular model, send it with your Blender version via the [contact page](\u002Fcontact).\n\n## The result looks wrong or I want to start over\n\nThe split does not change the source. Delete the collection called \"BedSplit - \" plus your model name, or press Undo, or just split again, which replaces the previous result for that source.\n\n## The STL files do not match my slicer scale\n\nThe files are exported in millimetres. Import them at 100 percent. If your slicer assumes inches, change that setting there.\n\n## Export STL is greyed out, or it says \"choose a folder\"\n\nThe button needs a result in the scene. Run **Split to Bed** first. When the folder chooser is closed with no folder, you get \"choose a folder\". If the folder cannot be written the message says \"cannot write the files\".\n\n## Splitting is slow\n\nCutting and repair run in Blender's Python, so a mesh with millions of faces keeps Blender busy for a while, and the cursor shows a wait symbol until the result appears. A typical figure finishes in seconds. The slowest case is a broken mesh that needs the voxel rebuild: the add-on tries a fine 0.8 mm grid first and steps up to coarser grids (1.15, 1.6, 2.4, then 3.2 mm) when the rebuilt surface would exceed 600,000 faces. If the wait is long, reduce the polygon count first, for example with a Decimate modifier applied to a copy.\n\n## Related\n\n- Product page: [BedSplit](\u002Faddons\u002Fbedsplit)\n- [Panel reference](\u002Fdocs\u002Fbedsplit\u002Fpanel) for defaults and ranges\n- Guide: [how to split a model for 3D printing](\u002Fguides\u002Fsplit-model-for-3d-printing)\n",{"title":2486,"description":2701},"docs\u002Fbedsplit\u002Ftroubleshooting","RTt9TbtnZgQuUULAfn-uldoCFdczAhtPyqVQnvZW-W0",1794858941684]