# ReQuad: Quad Remesher for AI-Generated Meshes in Blender

> Turn a dense Meshy, Tripo, Hunyuan3D, Rodin or TRELLIS model into a clean quad mesh in Blender with one button. 5,000 to 50,000 faces, runs in the background.

- Page: https://mendboxstudio.com/addons/requad
- Updated: 2026-11-19
- Publisher: Mendbox Studio (Dynamic Flower Unipessoal LDA, Portugal)

- Price: $10
- Blender: 4.2 and newer
- Version: 0.1.4

## AI mesh too dense and messy to work with?

Meshy, Tripo, Hunyuan3D, Rodin and TRELLIS give you models with hundreds of thousands to millions of triangles. You cannot edit them, sculpt on them or send them anywhere without a lighter, cleaner mesh first.

ReQuad is a quad remesher for these AI-generated meshes. Select the model in Blender, choose a face count, press **Remesh to Quads**. You get a new object made of quads where the model is thick enough and triangles on thin parts, in one welded mesh. It runs in a background process, so Blender stays usable, and your original is never changed. Launch price **$10**, later **$14**. Blender 4.2 and newer, on macOS (Apple Silicon and Intel), Windows (x86-64) and Linux (x86-64).

## One click

1. **Select** the model in Blender, in Object Mode.
2. **Open** the ReQuad tab (press N) and set **Faces**.
3. **Press** **Remesh to Quads**. A progress bar and a Cancel button appear, and you keep working.

The result is a new object named after the source with `_quads` added, next to the original. One `Cmd/Ctrl+Z` removes it. A TRELLIS chest of 986,364 triangles became 9,783 faces, 87% quads.

![A dense AI-generated chest before and after one click: 986,364 triangles become 9,783 faces, 87% quads](https://mendboxstudio.com/media/requad-oneclick.webp)

## The face count you choose

Set Faces from 5,000 to 50,000; the default is 10,000. The result lands close to the number you ask for: on our test models it was within about 5%. The same chest gave 5,062 faces at 85% quads, 9,783 faces at 87% and 20,702 faces at 89%.

![The same AI model remeshed to 5,000, 10,000 and 20,000 faces](https://mendboxstudio.com/media/requad-faces.webp)

## Thin parts stay clean

Where a wall is thinner than about one and a quarter quad edges, a quad mesh would tear or fold. ReQuad keeps those parts as triangles and builds quads everywhere else, so the mesh stays closed. A dragon of 952,216 triangles became 10,319 faces, 84% quads. Its thin wings, 10% of the surface, are triangles, shown in orange.

![A remeshed dragon: quads on the body, triangles in orange on the thin wings](https://mendboxstudio.com/media/requad-thin.webp)

## The shape stays true

Every result is measured against the source. On the dragon, 99% of the new surface is within 0.15% of the model size, and the worst point is 0.50% off. A result that fails the check is not handed out (see the honest fallback below).

![Shaded source and remeshed result side by side: the shape stays the same](https://mendboxstudio.com/media/requad-quality.webp)

## Blender stays usable, Cancel anytime

The remesh runs in a second Blender in the background. You keep orbiting, modelling and saving. Cancel stops it in under a second. A crate of 993,049 triangles finished in 87 seconds on Apple Silicon, with 10,405 faces for a target of 10,000. The Result box shows the faces, the share of quads, the shape deviation and the time.

![The ReQuad panel with progress bar and Cancel while the viewport keeps orbiting, then the Result box](https://mendboxstudio.com/media/requad-background.webp)

## Honest fallback

Not every model can become quads. When a model is mostly thin sheets, or the quad mesh fails the shape check, ReQuad gives you a triangle mesh with the same face count and tells you why in plain words, for example "53% of the surface is thinner than one quad at this budget". You always get a usable mesh. Switch this off with **Triangles if quads fail**.

![A knight model that falls back to a clean triangle mesh, with the reason shown in the panel](https://mendboxstudio.com/media/requad-fallback.webp)

## What we measured

We ran 30 AI-generated models from Meshy, Tripo, Hunyuan3D, Rodin and TRELLIS at 10,000 faces with default settings. **20 of 30 gave a quad mesh**, with 40% to 99% quads and a median of about 83%. 10 got the triangle fallback with a reason. None failed. Time on Apple Silicon was 2 seconds to 4 minutes, depending on the size of the source. We did not measure real sculpts or organic 3D scans, so we make no claim about them.

## What it does not do

- No UVs and no materials: the result is a plain mesh. Keep your original for textures.
- No symmetry, no edge-flow guides and no density painting.
- Sharp edges are not kept. It is not for hard-surface or CAD shapes: on mechanical prints most results fell back to triangles.
- Faces from 5,000 to 50,000. On the models that passed, 40% to 99% quads; thin parts are always triangles.
- It does not make animation-ready edge loops, and nothing is promised about rigging.
- One active mesh object at a time. Sources over 2 million triangles are refused.

Need UVs and baked textures too? [AssetBake](https://mendboxstudio.com/addons/assetbake) has the same quad mode plus new UVs, baked PBR textures and GLB export. Need to fill holes or turn n-gons into quads on a mesh you keep? That is [QuadFix](https://mendboxstudio.com/addons/quadfix).

## Compatibility

Blender 4.2 LTS or newer, tested on 4.2, 4.5 and 5.2. macOS (Apple Silicon and Intel), Windows (x86-64) and Linux (x86-64). Intel Mac: Blender 4.2–4.5 (Blender 5.x has no Intel Mac build). It works offline and needs no other software and no graphics card. Licence GPL-3.0-or-later. Installation is on the [install page](https://mendboxstudio.com/docs/requad#install).

## FAQ

**Does it change my original model?** No. The original is hidden in the viewport and never modified. **Show the Source** brings it back, and `Cmd/Ctrl+Z` removes the result.

**Does it make animation-ready topology?** No. It makes a quad-dominant mesh with triangles on thin parts. Nothing is promised about edge loops or rigging.

**Why did I get a triangle mesh?** The model was mostly thin sheets, or the quad mesh failed the shape check. The Result box names the reason. The triangle mesh has the face count you asked for, and a different face count sometimes works.

**Does it work on Windows or Intel Mac?** Yes. Windows (x86-64) since version 0.1.2, Intel Mac since 0.1.4 on Blender 4.2 to 4.5 (Blender 5.x has no Intel Mac build).

**Does it keep UVs or materials?** No. The result is a plain mesh.

**How long does it take?** On Apple Silicon, 2 seconds to 4 minutes at 10,000 faces, depending on the source. A model of 1 million triangles usually takes 30 to 90 seconds, and Blender stays usable meanwhile.

**Is there a free Lite?** No. The remesher is a compiled module, and without it there is nothing to offer for free.

## How to buy

ReQuad costs $10 at launch, $14 later. Buy it on [Gumroad](https://mendbox.gumroad.com/l/requad?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=requad) or [BlendKit](https://www.blendkit.com/asset-gallery-detail/a9b110ae-8d22-49e5-926b-6d093de0c901/?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=requad). The Superhive listing is coming soon. Free updates are included. Questions go to support@mendboxstudio.com, with a reply within 24 hours. Built and tested by Pavel at Mendbox Studio ([about](https://mendboxstudio.com/about)).

After purchase, follow the [install steps](https://mendboxstudio.com/docs/requad#install), then read [how to use it](https://mendboxstudio.com/docs/requad#remesh-a-model).

---
Source: https://mendboxstudio.com/addons/requad
