[{"data":1,"prerenderedAt":2097},["ShallowReactive",2],{"\u002Fdocs\u002Fassetbake\u002Finstall":3,"\u002Fdocs\u002Fassetbake\u002Finstall-siblings":226,"\u002Fdocs\u002Fassetbake\u002Finstall-addon":1711},{"id":4,"title":5,"addon":6,"body":7,"description":216,"extension":217,"meta":218,"navigation":219,"order":206,"path":220,"rawbody":221,"seo":222,"stem":223,"updated":224,"__hash__":225},"docs\u002Fdocs\u002Fassetbake\u002Finstall.md","Install AssetBake in Blender","assetbake",{"type":8,"value":9,"toc":204},"minimark",[10,15,36,40,44,47,51,62,68,89,93,112,123,130,134,143,147,152,156,168,175,182,186],[11,12,14],"h2",{"id":13},"requirements","Requirements",[16,17,18,22,30,33],"ul",{},[19,20,21],"li",{},"Blender 4.2 LTS or newer. AssetBake is a Blender extension.",[19,23,24,25,29],{},"Blender's own glTF 2.0 add-on must be switched on. It is on by default. You need it for ",[26,27,28],"strong",{},"Export GLB",".",[19,31,32],{},"Free memory: about 2 to 8 GB for normal AI models. A very large source needs more. AssetBake warns you above 5,000,000 triangles that the job takes several minutes and several GB of memory, and refuses a selection above 8,000,000 triangles.",[19,34,35],{},"No internet connection is needed.",[11,37,39],{"id":38},"platforms","Platforms",[41,42,43],"p",{},"macOS (Apple Silicon) and Windows (x86-64), Game and Quad-dominant on both. Linux: not confirmed yet. Intel Mac: not supported yet. AssetBake Lite was tested on macOS and Linux (x86-64), not on Windows.",[41,45,46],{},"On a system without Quad-dominant, the mode button is greyed out and the panel says so. Game mode works as normal.",[11,48,50],{"id":49},"install-from-the-zip","Install from the .zip",[41,52,53,54,61],{},"Download the .zip from ",[55,56,60],"a",{"href":57,"rel":58},"https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake?utm_source=mendboxstudio&utm_medium=docs&utm_campaign=assetbake",[59],"nofollow","Gumroad"," (the Superhive listing is in review). Do not unzip it.",[63,64,65],"blockquote",{},[41,66,67],{},"Safari unpacks .zip downloads automatically. Download with Chrome or Firefox, or turn off Safari > Settings > General > Open \"safe\" files after downloading.",[69,70,71,77,83,86],"ol",{},[19,72,73,74,29],{},"In Blender open ",[26,75,76],{},"Edit > Preferences > Get Extensions",[19,78,79,80,29],{},"Click the small arrow menu at the top right of the window and choose ",[26,81,82],{},"Install from Disk",[19,84,85],{},"Pick the .zip file.",[19,87,88],{},"Make sure the add-on is enabled in the list.",[11,90,92],{"id":91},"where-the-panel-appears","Where the panel appears",[69,94,95,98,106],{},[19,96,97],{},"Open a 3D viewport.",[19,99,100,101,105],{},"Press ",[102,103,104],"code",{},"N"," to open the sidebar.",[19,107,108,109,29],{},"Open the tab named ",[26,110,111],{},"AssetBake",[41,113,114,115,118,119,122],{},"The tab shows the version in its title, for example ",[102,116,117],{},"AssetBake 0.2.6",". The settings need Object Mode. In Edit Mode they are greyed out and the panel asks you to go to Object Mode. A second panel named ",[26,120,121],{},"Result"," sits below the settings. It shows what the last job did and holds the export controls.",[41,124,125,126,29],{},"Everything is described in the ",[55,127,129],{"href":128},"\u002Fdocs\u002Fassetbake\u002Fpanel","panel reference",[11,131,133],{"id":132},"update","Update",[41,135,136,137,139,140,142],{},"Open ",[26,138,76],{},", use ",[26,141,82],{}," with the new .zip and confirm that it replaces the old version.",[11,144,146],{"id":145},"uninstall","Uninstall",[41,148,136,149,151],{},[26,150,76],{},", find AssetBake in the list and remove it. Assets and models already in your scenes stay as they are.",[11,153,155],{"id":154},"lite-or-full","Lite or full",[41,157,158,159,164,165,167],{},"The free ",[55,160,163],{"href":161,"rel":162},"https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fassetbake-lite",[59],"AssetBake Lite"," is a separate extension with its own tab, named ",[26,166,163],{},". Download its .zip from the Releases page on GitHub and install it the same way. You can have both installed.",[41,169,170,171,29],{},"The full comparison table is on the ",[55,172,174],{"href":173},"\u002Faddons\u002Fassetbake#lite-and-full-version","product page",[41,176,177,178,181],{},"Read the ",[55,179,174],{"href":180},"\u002Faddons\u002Fassetbake"," for the price and buy links.",[11,183,185],{"id":184},"related","Related",[16,187,188,193,198],{},[19,189,190,191],{},"Product page: ",[55,192,111],{"href":180},[19,194,195],{},[55,196,197],{"href":128},"Panel reference",[19,199,200],{},[55,201,203],{"href":202},"\u002Fdocs\u002Fassetbake\u002Ftroubleshooting","Troubleshooting",{"title":205,"searchDepth":206,"depth":206,"links":207},"",2,[208,209,210,211,212,213,214,215],{"id":13,"depth":206,"text":14},{"id":38,"depth":206,"text":39},{"id":49,"depth":206,"text":50},{"id":91,"depth":206,"text":92},{"id":132,"depth":206,"text":133},{"id":145,"depth":206,"text":146},{"id":154,"depth":206,"text":155},{"id":184,"depth":206,"text":185},"Install AssetBake from its .zip in Blender 4.2 or newer, find the AssetBake sidebar tab, check platform support and compare Lite with the full version.","md",{},true,"\u002Fdocs\u002Fassetbake\u002Finstall","---\ntitle: \"Install AssetBake in Blender\"\ndescription: \"Install AssetBake from its .zip in Blender 4.2 or newer, find the AssetBake sidebar tab, check platform support and compare Lite with the full version.\"\naddon: assetbake\norder: 2\nupdated: 2026-11-20\n---\n\n## Requirements\n\n- Blender 4.2 LTS or newer. AssetBake is a Blender extension.\n- Blender's own glTF 2.0 add-on must be switched on. It is on by default. You need it for **Export GLB**.\n- Free memory: about 2 to 8 GB for normal AI models. A very large source needs more. AssetBake warns you above 5,000,000 triangles that the job takes several minutes and several GB of memory, and refuses a selection above 8,000,000 triangles.\n- No internet connection is needed.\n\n## Platforms\n\nmacOS (Apple Silicon) and Windows (x86-64), Game and Quad-dominant on both. Linux: not confirmed yet. Intel Mac: not supported yet. AssetBake Lite was tested on macOS and Linux (x86-64), not on Windows.\n\nOn a system without Quad-dominant, the mode button is greyed out and the panel says so. Game mode works as normal.\n\n## Install from the .zip\n\nDownload the .zip from [Gumroad](https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake?utm_source=mendboxstudio&utm_medium=docs&utm_campaign=assetbake) (the Superhive listing is in review). Do not unzip it.\n\n> Safari unpacks .zip downloads automatically. Download with Chrome or Firefox, or turn off Safari > Settings > General > Open \"safe\" files after downloading.\n\n1. In Blender open **Edit > Preferences > Get Extensions**.\n2. Click the small arrow menu at the top right of the window and choose **Install from Disk**.\n3. Pick the .zip file.\n4. Make sure the add-on is enabled in the list.\n\n## Where the panel appears\n\n1. Open a 3D viewport.\n2. Press `N` to open the sidebar.\n3. Open the tab named **AssetBake**.\n\nThe tab shows the version in its title, for example `AssetBake 0.2.6`. The settings need Object Mode. In Edit Mode they are greyed out and the panel asks you to go to Object Mode. A second panel named **Result** sits below the settings. It shows what the last job did and holds the export controls.\n\nEverything is described in the [panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel).\n\n## Update\n\nOpen **Edit > Preferences > Get Extensions**, use **Install from Disk** with the new .zip and confirm that it replaces the old version.\n\n## Uninstall\n\nOpen **Edit > Preferences > Get Extensions**, find AssetBake in the list and remove it. Assets and models already in your scenes stay as they are.\n\n## Lite or full\n\nThe free [AssetBake Lite](https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fassetbake-lite) is a separate extension with its own tab, named **AssetBake Lite**. Download its .zip from the Releases page on GitHub and install it the same way. You can have both installed.\n\nThe full comparison table is on the [product page](\u002Faddons\u002Fassetbake#lite-and-full-version).\n\nRead the [product page](\u002Faddons\u002Fassetbake) for the price and buy links.\n\n## Related\n\n- Product page: [AssetBake](\u002Faddons\u002Fassetbake)\n- [Panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel)\n- [Troubleshooting](\u002Fdocs\u002Fassetbake\u002Ftroubleshooting)\n",{"title":5,"description":216},"docs\u002Fassetbake\u002Finstall","2026-11-20","2u6PGlKT9kQ4OrLS1pvRjmnYh4BFvQ8cw0oXDZbdyFc",[227,479,610,1180],{"id":228,"title":229,"addon":6,"body":230,"description":471,"extension":217,"meta":472,"navigation":219,"order":473,"path":474,"rawbody":475,"seo":476,"stem":477,"updated":224,"__hash__":478},"docs\u002Fdocs\u002Fassetbake\u002Findex.md","AssetBake documentation",{"type":8,"value":231,"toc":457},[232,236,239,245,249,260,264,278,281,285,299,305,309,327,331,361,371,375,380,391,394,398,401,430,432],[11,233,235],{"id":234},"what-assetbake-is","What AssetBake is",[41,237,238],{},"AssetBake is a Blender add-on that turns a heavy 3D model into a game asset. You select the model, pick a budget and press one button. You get a lighter mesh, new UVs, baked textures and, when you want it, a GLB file for your game engine.",[41,240,241,242,29],{},"It was made for models from AI services such as Meshy, Tripo and Hunyuan3D. These models are often very dense, have messy UVs and carry the colour in a huge texture or in vertex colours. It works on any mesh in Blender; AI models are the case it is tested on. For a short pitch and the price, see the ",[55,243,244],{"href":180},"AssetBake product page",[11,246,248],{"id":247},"who-it-is-for","Who it is for",[16,250,251,254,257],{},[19,252,253],{},"Game developers who get AI-generated models and need them light enough for a game.",[19,255,256],{},"Artists who want a clean UV layout and baked PBR textures without doing the bake by hand.",[19,258,259],{},"Anyone who needs a GLB for Unity, Unreal Engine, Godot or the web.",[11,261,263],{"id":262},"what-it-does-to-your-model","What it does to your model",[69,265,266,269,272,275],{},[19,267,268],{},"It cleans the mesh and reduces it to the budget you choose.",[19,270,271],{},"It unwraps new UVs.",[19,273,274],{},"It bakes the look of the original onto the new mesh: normal map, base colour, and one texture that holds ambient occlusion, roughness and metallic. Emission and alpha are baked when the model has them.",[19,276,277],{},"It puts the finished asset next to your model and hides the original. The original is never changed.",[41,279,280],{},"The work runs in a background process, so Blender stays usable. The panel shows progress and has a Cancel button.",[11,282,284],{"id":283},"the-two-modes","The two modes",[16,286,287,293],{},[19,288,289,292],{},[26,290,291],{},"Game (triangles):"," the whole asset is made of triangles, reduced to your triangle budget. It works on every model and keeps the shape best.",[19,294,295,298],{},[26,296,297],{},"Quad-dominant:"," quads where the model is thick enough, triangles on thin parts, in one closed mesh. Use it when you want to edit the asset afterwards. When a model does not allow it, AssetBake makes a Game asset instead and the result tells you why.",[41,300,301,302,304],{},"AssetBake is not retopology. Quad-dominant does not rebuild clean edge flow by hand-placed loops. See the ",[55,303,129],{"href":128}," for the limits of each mode.",[11,306,308],{"id":307},"contents","Contents",[16,310,311,317,322],{},[19,312,313,316],{},[55,314,315],{"href":220},"Install",": install the .zip, requirements, platforms, Lite compared with the full version.",[19,318,319,321],{},[55,320,197],{"href":128},": every control in the AssetBake tab with its range and default.",[19,323,324,326],{},[55,325,203],{"href":202},": the messages you can see and what to do about them.",[11,328,330],{"id":329},"the-idea-in-one-minute","The idea in one minute",[69,332,333,336,344,347,353],{},[19,334,335],{},"Select your model in the 3D viewport and make sure you are in Object Mode.",[19,337,100,338,340,341,343],{},[102,339,104],{}," and open the ",[26,342,111],{}," tab.",[19,345,346],{},"Choose a mode, a budget and a texture size.",[19,348,100,349,352],{},[26,350,351],{},"Make Game Asset"," and wait for the progress bar to finish.",[19,354,355,356,358,359,29],{},"Check the ",[26,357,121],{}," panel, then press ",[26,360,28],{},[41,362,363,366,367,370],{},[102,364,365],{},"Ctrl+Z"," (",[102,368,369],{},"Cmd+Z"," on Mac) removes the result in one step.",[11,372,374],{"id":373},"version-history","Version history",[376,377,379],"h3",{"id":378},"v026-19-november-2026","v0.2.6 (19 November 2026)",[16,381,382,385,388],{},[19,383,384],{},"Quad-dominant mode now works on Windows (x86-64). AssetBake runs on macOS (Apple Silicon) and Windows (x86-64), with Game and Quad-dominant on both. Linux is not confirmed yet. Intel Mac is not supported yet.",[19,386,387],{},"The Export box appears only when there is an asset to export.",[19,389,390],{},"Game mode tells you before the run when the source is already under the triangle budget: nothing to reduce.",[41,392,393],{},"AssetBake Lite 1.0.4 (19 November 2026) has the same two panel improvements. Lite is not tested on Windows.",[376,395,397],{"id":396},"v025-18-november-2026","v0.2.5 (18 November 2026)",[41,399,400],{},"The first public release. It needs Blender 4.2 or newer and contains:",[16,402,403,406,409,412,415,418,421,424,427],{},[19,404,405],{},"Game mode and Quad-dominant mode.",[19,407,408],{},"Triangle budget presets from 2,000 to 50,000, and a custom budget.",[19,410,411],{},"Texture sizes 1k, 2k and 4k.",[19,413,414],{},"Maps: Normal, Base Colour, Roughness, Metallic, Emission, Alpha and AO.",[19,416,417],{},"One asset for the whole selection, or one asset per part.",[19,419,420],{},"Remove hidden surface.",[19,422,423],{},"Background job with a progress bar and Cancel.",[19,425,426],{},"Select Source, to bring the original back and make another version.",[19,428,429],{},"GLB export with OpenGL or DirectX normal maps, and an option to also save the textures as PNG files.",[11,431,185],{"id":184},[16,433,434,438,442,446,450],{},[19,435,190,436],{},[55,437,111],{"href":180},[19,439,440],{},[55,441,315],{"href":220},[19,443,444],{},[55,445,197],{"href":128},[19,447,448],{},[55,449,203],{"href":202},[19,451,452,453],{},"Questions: ",[55,454,456],{"href":455},"mailto:support@mendboxstudio.com","support@mendboxstudio.com",{"title":205,"searchDepth":206,"depth":206,"links":458},[459,460,461,462,463,464,465,470],{"id":234,"depth":206,"text":235},{"id":247,"depth":206,"text":248},{"id":262,"depth":206,"text":263},{"id":283,"depth":206,"text":284},{"id":307,"depth":206,"text":308},{"id":329,"depth":206,"text":330},{"id":373,"depth":206,"text":374,"children":466},[467,469],{"id":378,"depth":468,"text":379},3,{"id":396,"depth":468,"text":397},{"id":184,"depth":206,"text":185},"Documentation for the AssetBake Blender add-on: turn a heavy AI-generated model into a game asset with low-poly mesh, new UVs, baked textures and GLB export.",{},1,"\u002Fdocs\u002Fassetbake","---\ntitle: \"AssetBake documentation\"\ndescription: \"Documentation for the AssetBake Blender add-on: turn a heavy AI-generated model into a game asset with low-poly mesh, new UVs, baked textures and GLB export.\"\naddon: assetbake\norder: 1\nupdated: 2026-11-20\n---\n\n## What AssetBake is\n\nAssetBake is a Blender add-on that turns a heavy 3D model into a game asset. You select the model, pick a budget and press one button. You get a lighter mesh, new UVs, baked textures and, when you want it, a GLB file for your game engine.\n\nIt was made for models from AI services such as Meshy, Tripo and Hunyuan3D. These models are often very dense, have messy UVs and carry the colour in a huge texture or in vertex colours. It works on any mesh in Blender; AI models are the case it is tested on. For a short pitch and the price, see the [AssetBake product page](\u002Faddons\u002Fassetbake).\n\n## Who it is for\n\n- Game developers who get AI-generated models and need them light enough for a game.\n- Artists who want a clean UV layout and baked PBR textures without doing the bake by hand.\n- Anyone who needs a GLB for Unity, Unreal Engine, Godot or the web.\n\n## What it does to your model\n\n1. It cleans the mesh and reduces it to the budget you choose.\n2. It unwraps new UVs.\n3. It bakes the look of the original onto the new mesh: normal map, base colour, and one texture that holds ambient occlusion, roughness and metallic. Emission and alpha are baked when the model has them.\n4. It puts the finished asset next to your model and hides the original. The original is never changed.\n\nThe work runs in a background process, so Blender stays usable. The panel shows progress and has a Cancel button.\n\n## The two modes\n\n- **Game (triangles):** the whole asset is made of triangles, reduced to your triangle budget. It works on every model and keeps the shape best.\n- **Quad-dominant:** quads where the model is thick enough, triangles on thin parts, in one closed mesh. Use it when you want to edit the asset afterwards. When a model does not allow it, AssetBake makes a Game asset instead and the result tells you why.\n\nAssetBake is not retopology. Quad-dominant does not rebuild clean edge flow by hand-placed loops. See the [panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel) for the limits of each mode.\n\n## Contents\n\n- [Install](\u002Fdocs\u002Fassetbake\u002Finstall): install the .zip, requirements, platforms, Lite compared with the full version.\n- [Panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel): every control in the AssetBake tab with its range and default.\n- [Troubleshooting](\u002Fdocs\u002Fassetbake\u002Ftroubleshooting): the messages you can see and what to do about them.\n\n## The idea in one minute\n\n1. Select your model in the 3D viewport and make sure you are in Object Mode.\n2. Press `N` and open the **AssetBake** tab.\n3. Choose a mode, a budget and a texture size.\n4. Press **Make Game Asset** and wait for the progress bar to finish.\n5. Check the **Result** panel, then press **Export GLB**.\n\n`Ctrl+Z` (`Cmd+Z` on Mac) removes the result in one step.\n\n## Version history\n\n### v0.2.6 (19 November 2026)\n\n- Quad-dominant mode now works on Windows (x86-64). AssetBake runs on macOS (Apple Silicon) and Windows (x86-64), with Game and Quad-dominant on both. Linux is not confirmed yet. Intel Mac is not supported yet.\n- The Export box appears only when there is an asset to export.\n- Game mode tells you before the run when the source is already under the triangle budget: nothing to reduce.\n\nAssetBake Lite 1.0.4 (19 November 2026) has the same two panel improvements. Lite is not tested on Windows.\n\n### v0.2.5 (18 November 2026)\n\nThe first public release. It needs Blender 4.2 or newer and contains:\n\n- Game mode and Quad-dominant mode.\n- Triangle budget presets from 2,000 to 50,000, and a custom budget.\n- Texture sizes 1k, 2k and 4k.\n- Maps: Normal, Base Colour, Roughness, Metallic, Emission, Alpha and AO.\n- One asset for the whole selection, or one asset per part.\n- Remove hidden surface.\n- Background job with a progress bar and Cancel.\n- Select Source, to bring the original back and make another version.\n- GLB export with OpenGL or DirectX normal maps, and an option to also save the textures as PNG files.\n\n## Related\n\n- Product page: [AssetBake](\u002Faddons\u002Fassetbake)\n- [Install](\u002Fdocs\u002Fassetbake\u002Finstall)\n- [Panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel)\n- [Troubleshooting](\u002Fdocs\u002Fassetbake\u002Ftroubleshooting)\n- Questions: support@mendboxstudio.com\n",{"title":229,"description":471},"docs\u002Fassetbake\u002Findex","nF7yQHuBD6peaz-U8LhcRaFVgr0iwMqg9A0z-mv_KaI",{"id":4,"title":5,"addon":6,"body":480,"description":216,"extension":217,"meta":608,"navigation":219,"order":206,"path":220,"rawbody":221,"seo":609,"stem":223,"updated":224,"__hash__":225},{"type":8,"value":481,"toc":598},[482,484,496,498,500,502,504,509,513,527,529,541,547,551,553,559,561,565,567,574,578,582,584],[11,483,14],{"id":13},[16,485,486,488,492,494],{},[19,487,21],{},[19,489,24,490,29],{},[26,491,28],{},[19,493,32],{},[19,495,35],{},[11,497,39],{"id":38},[41,499,43],{},[41,501,46],{},[11,503,50],{"id":49},[41,505,53,506,61],{},[55,507,60],{"href":57,"rel":508},[59],[63,510,511],{},[41,512,67],{},[69,514,515,519,523,525],{},[19,516,73,517,29],{},[26,518,76],{},[19,520,79,521,29],{},[26,522,82],{},[19,524,85],{},[19,526,88],{},[11,528,92],{"id":91},[69,530,531,533,537],{},[19,532,97],{},[19,534,100,535,105],{},[102,536,104],{},[19,538,108,539,29],{},[26,540,111],{},[41,542,114,543,118,545,122],{},[102,544,117],{},[26,546,121],{},[41,548,125,549,29],{},[55,550,129],{"href":128},[11,552,133],{"id":132},[41,554,136,555,139,557,142],{},[26,556,76],{},[26,558,82],{},[11,560,146],{"id":145},[41,562,136,563,151],{},[26,564,76],{},[11,566,155],{"id":154},[41,568,158,569,164,572,167],{},[55,570,163],{"href":161,"rel":571},[59],[26,573,163],{},[41,575,170,576,29],{},[55,577,174],{"href":173},[41,579,177,580,181],{},[55,581,174],{"href":180},[11,583,185],{"id":184},[16,585,586,590,594],{},[19,587,190,588],{},[55,589,111],{"href":180},[19,591,592],{},[55,593,197],{"href":128},[19,595,596],{},[55,597,203],{"href":202},{"title":205,"searchDepth":206,"depth":206,"links":599},[600,601,602,603,604,605,606,607],{"id":13,"depth":206,"text":14},{"id":38,"depth":206,"text":39},{"id":49,"depth":206,"text":50},{"id":91,"depth":206,"text":92},{"id":132,"depth":206,"text":133},{"id":145,"depth":206,"text":146},{"id":154,"depth":206,"text":155},{"id":184,"depth":206,"text":185},{},{"title":5,"description":216},{"id":611,"title":612,"addon":6,"body":613,"description":1174,"extension":217,"meta":1175,"navigation":219,"order":468,"path":128,"rawbody":1176,"seo":1177,"stem":1178,"updated":224,"__hash__":1179},"docs\u002Fdocs\u002Fassetbake\u002Fpanel.md","AssetBake panel reference",{"type":8,"value":614,"toc":1161},[615,619,631,635,638,687,694,698,709,754,757,760,774,778,781,785,896,899,903,954,960,964,967,988,1009,1016,1037,1040,1044,1050,1082,1086,1089,1140,1145,1147],[11,616,618],{"id":617},"where-to-find-it","Where to find it",[41,620,621,622,624,625,627,628,630],{},"Open the 3D viewport sidebar with ",[102,623,104],{}," and choose the ",[26,626,111],{}," tab. The settings panel is titled with the add-on name and version. Below it is the ",[26,629,121],{}," panel. The settings need Object Mode and are greyed out while a job runs. Hover over a control in Blender to see its tooltip.",[11,632,634],{"id":633},"mode","Mode",[41,636,637],{},"Two buttons side by side.",[639,640,641,657],"table",{},[642,643,644],"thead",{},[645,646,647,651,654],"tr",{},[648,649,650],"th",{},"Control",[648,652,653],{},"What it does",[648,655,656],{},"Default",[658,659,660,674],"tbody",{},[645,661,662,668,671],{},[663,664,665],"td",{},[26,666,667],{},"Game (triangles)",[663,669,670],{},"All triangles, reduced to the budget. Works on every model and keeps the shape best.",[663,672,673],{},"On",[645,675,676,681,684],{},[663,677,678],{},[26,679,680],{},"Quad-dominant",[663,682,683],{},"Quads where the model is thick enough, triangles on thin parts, in one closed mesh. When a model does not allow it, a Game asset is made instead and the result says why.",[663,685,686],{},"Off",[41,688,689,690,693],{},"When Quad-dominant is selected, the panel shows the note \"Quads on thick parts, triangles on thin parts.\" If your system has no Quad-dominant build, the button is greyed out and the panel says so. See ",[55,691,692],{"href":220},"install"," for the platforms.",[11,695,697],{"id":696},"budget","Budget",[41,699,700,701,704,705,708],{},"The title of this box changes with the mode: ",[26,702,703],{},"Triangle budget"," in Game mode, ",[26,706,707],{},"Face budget (quads + triangles)"," in Quad-dominant mode. In Quad-dominant mode a quad counts as one face.",[639,710,711,721],{},[642,712,713],{},[645,714,715,717,719],{},[648,716,650],{},[648,718,653],{},[648,720,656],{},[658,722,723,737],{},[645,724,725,728,734],{},[663,726,727],{},"Budget dropdown",[663,729,730,731,29],{},"Presets: 2,000, 5,000, 10,000, 20,000, 50,000, or ",[26,732,733],{},"Custom",[663,735,736],{},"10,000",[645,738,739,749,752],{},[663,740,741,744,745,748],{},[26,742,743],{},"Triangles"," \u002F ",[26,746,747],{},"Faces"," (only with Custom)",[663,750,751],{},"Your own number. The label says Triangles in Game mode and Faces in Quad-dominant mode.",[663,753,736],{},[41,755,756],{},"The custom value goes from 200 to 1,000,000. The slider stops at 200,000. Type a number to go higher.",[41,758,759],{},"Quad-dominant has its own limits, and the panel shows a message when you hit one:",[16,761,762,765,768,771],{},[19,763,764],{},"Under 5,000 faces it will not run. The panel says \"Quad-dominant needs at least 5,000 faces.\"",[19,766,767],{},"Under 10,000 faces the quad share drops and a fallback to Game is more likely. The mode was tuned at 10,000 faces.",[19,769,770],{},"A source above 2,000,000 triangles is not tried. A Game asset is made instead. To get quads, decimate the source first.",[19,772,773],{},"If the source already has fewer triangles than the budget allows, it is kept as it is.",[376,775,777],{"id":776},"quad-share-estimate","Quad share estimate",[41,779,780],{},"In Quad-dominant mode with the Scope set to one asset for the selection, the panel takes a quick look at the wall thickness of your model before you start. It shows a line that starts with \"Expect about\" and gives a range of the share of quads. When many parts are thin it adds that a fallback to Game is possible. When most of the model is thin it says \"Mostly thin parts: will likely fall back to Game\". The estimate is a guide, not a promise. While it is measuring, the panel says \"Estimating the quad share...\". With Scope set to one asset per part, no estimate is shown, because every part is checked on its own.",[11,782,784],{"id":783},"textures","Textures",[639,786,787,797],{},[642,788,789],{},[645,790,791,793,795],{},[648,792,650],{},[648,794,653],{},[648,796,656],{},[658,798,799,812,824,836,848,860,872,884],{},[645,800,801,806,809],{},[663,802,803],{},[26,804,805],{},"1k \u002F 2k \u002F 4k",[663,807,808],{},"Width and height of the baked textures: 1024 x 1024, 2048 x 2048 or 4096 x 4096 pixels.",[663,810,811],{},"2k",[645,813,814,819,822],{},[663,815,816],{},[26,817,818],{},"Normal",[663,820,821],{},"Always baked. Shown ticked and not changeable.",[663,823,673],{},[645,825,826,831,834],{},[663,827,828],{},[26,829,830],{},"Base Colour",[663,832,833],{},"Colour of the surface.",[663,835,673],{},[645,837,838,843,846],{},[663,839,840],{},[26,841,842],{},"Roughness",[663,844,845],{},"Packed into the green channel of one combined texture.",[663,847,673],{},[645,849,850,855,858],{},[663,851,852],{},[26,853,854],{},"Metallic",[663,856,857],{},"Packed into the blue channel of the same texture.",[663,859,673],{},[645,861,862,867,870],{},[663,863,864],{},[26,865,866],{},"Emission",[663,868,869],{},"Baked only when the source glows.",[663,871,673],{},[645,873,874,879,882],{},[663,875,876],{},[26,877,878],{},"Alpha",[663,880,881],{},"Baked only when the source has transparency. Stored in the base colour.",[663,883,673],{},[645,885,886,891,894],{},[663,887,888],{},[26,889,890],{},"AO",[663,892,893],{},"Ambient occlusion, packed into the red channel of the same texture. It is the slowest map.",[663,895,673],{},[41,897,898],{},"Roughness, Metallic and AO share one texture (AO in red, roughness in green, metallic in blue), the layout most game engines expect. Alpha is a cut-out: half-transparent surface such as glass becomes solid or a hole. Turn off the maps you do not need to save time.",[11,900,902],{"id":901},"scope","Scope",[639,904,905,915],{},[642,906,907],{},[645,908,909,911,913],{},[648,910,650],{},[648,912,653],{},[648,914,656],{},[658,916,917,930,942],{},[645,918,919,925,928],{},[663,920,921,922],{},"Scope dropdown: ",[26,923,924],{},"One asset for the selection",[663,926,927],{},"All selected objects become one asset.",[663,929,673],{},[645,931,932,937,940],{},[663,933,921,934],{},[26,935,936],{},"One asset per part",[663,938,939],{},"Every separate part becomes its own asset with its own textures. A part is what stays connected after doubled vertices are merged, not an object.",[663,941,686],{},[645,943,944,949,952],{},[663,945,946],{},[26,947,948],{},"Remove hidden surface",[663,950,951],{},"Surface that is shut in between parts and can never be seen is left out, so its triangles and texture space go to the visible surface. The mesh is open there.",[663,953,673],{},[41,955,956,957,959],{},"Untick ",[26,958,948],{}," if you need the inner surface kept.",[11,961,963],{"id":962},"selection-line-and-the-button","Selection line and the button",[41,965,966],{},"Below the settings the panel shows what you have selected, for example \"Selected: 1 object, 145,859 triangles\".",[16,968,969,972,979,982,985],{},[19,970,971],{},"With nothing usable selected it says \"Select one or more mesh objects\".",[19,973,974,975,978],{},"If you select only assets that AssetBake made, it says so and offers a ",[26,976,977],{},"Select Source"," button to select the originals.",[19,980,981],{},"Above 5,000,000 triangles it warns that the job takes several minutes and several GB of memory.",[19,983,984],{},"Above 8,000,000 triangles it stops and asks you to decimate the source first.",[19,986,987],{},"In Edit Mode it says \"Go to Object Mode to make an asset\".",[639,989,990,998],{},[642,991,992],{},[645,993,994,996],{},[648,995,650],{},[648,997,653],{},[658,999,1000],{},[645,1001,1002,1006],{},[663,1003,1004],{},[26,1005,351],{},[663,1007,1008],{},"Builds a low-poly, UV-unwrapped, textured asset from the selected objects. The work runs in the background and the selected objects are not changed. The button is greyed out when there is nothing to work on or a limit above is exceeded.",[41,1010,1011,1012,1015],{},"While a job runs, the panel shows a progress bar and a ",[26,1013,1014],{},"Cancel"," button.",[639,1017,1018,1026],{},[642,1019,1020],{},[645,1021,1022,1024],{},[648,1023,650],{},[648,1025,653],{},[658,1027,1028],{},[645,1029,1030,1034],{},[663,1031,1032],{},[26,1033,1014],{},[663,1035,1036],{},"Stops the background job. Nothing in the scene changes.",[41,1038,1039],{},"If you switch to Edit Mode while the job runs, it keeps running. When it finishes, the panel says \"Done - return to Object Mode to get the result\". The asset appears when you are back in Object Mode.",[11,1041,1043],{"id":1042},"result-panel","Result panel",[41,1045,1046,1047,1049],{},"The ",[26,1048,121],{}," panel shows what the last job did.",[16,1051,1052,1058,1067,1076],{},[19,1053,1054,1057],{},[26,1055,1056],{},"Asset box:"," the name of each asset and its numbers: triangles before and after (or faces, with the quad and triangle shares in Quad-dominant mode), how close the new shape is to the source, the texture size and maps, the number of UV islands, and the time.",[19,1059,1060,1063,1064,29],{},[26,1061,1062],{},"Messages:"," notes and warnings about this job. See ",[55,1065,1066],{"href":202},"troubleshooting",[19,1068,1069,1072,1073,1075],{},[26,1070,1071],{},"Select Source:"," after a successful job, the original objects are hidden, not changed. Press ",[26,1074,977],{}," to show and select them again, so you can make another version with a different budget or texture size. It also works from the viewport when you select an asset.",[19,1077,1078,1081],{},[26,1079,1080],{},"Copy log path:"," appears after a failed job. It copies the location of a log file to attach to a support request.",[11,1083,1085],{"id":1084},"export","Export",[41,1087,1088],{},"The export box is at the bottom of the Result panel and works in Object Mode. It appears only when there is an asset to export.",[639,1090,1091,1101],{},[642,1092,1093],{},[645,1094,1095,1097,1099],{},[648,1096,650],{},[648,1098,653],{},[648,1100,656],{},[658,1102,1103,1117,1129],{},[645,1104,1105,1111,1114],{},[663,1106,1107,1110],{},[26,1108,1109],{},"OpenGL \u002F DirectX"," (Normal map)",[663,1112,1113],{},"OpenGL is green up: Blender, Unity, Godot, glTF. DirectX is green down: Unreal Engine. The exported normal map has its green channel flipped.",[663,1115,1116],{},"OpenGL",[645,1118,1119,1124,1127],{},[663,1120,1121],{},[26,1122,1123],{},"Also save textures",[663,1125,1126],{},"Writes the textures as PNG files next to the GLB file.",[663,1128,686],{},[645,1130,1131,1135,1138],{},[663,1132,1133],{},[26,1134,28],{},[663,1136,1137],{},"Saves the asset as a GLB file for a game engine, with scale applied and roughness, metallic and occlusion packed into one texture.",[663,1139],{},[41,1141,1142,1144],{},[26,1143,28],{}," exports the selected assets, or the assets of the last run when none is selected. With one asset the file gets exactly the name you type. With several assets, each gets its own file named with the name you typed, an underscore and the asset name. A quad-dominant asset is exported as the triangles the textures were baked on.",[11,1146,185],{"id":184},[16,1148,1149,1153,1157],{},[19,1150,190,1151],{},[55,1152,111],{"href":180},[19,1154,1155],{},[55,1156,315],{"href":220},[19,1158,1159],{},[55,1160,203],{"href":202},{"title":205,"searchDepth":206,"depth":206,"links":1162},[1163,1164,1165,1168,1169,1170,1171,1172,1173],{"id":617,"depth":206,"text":618},{"id":633,"depth":206,"text":634},{"id":696,"depth":206,"text":697,"children":1166},[1167],{"id":776,"depth":468,"text":777},{"id":783,"depth":206,"text":784},{"id":901,"depth":206,"text":902},{"id":962,"depth":206,"text":963},{"id":1042,"depth":206,"text":1043},{"id":1084,"depth":206,"text":1085},{"id":184,"depth":206,"text":185},"Every control in the AssetBake sidebar panel: mode, budget, textures, maps, scope, hidden surface, Make Game Asset, Result and Export GLB, with defaults.",{},"---\ntitle: \"AssetBake panel reference\"\ndescription: \"Every control in the AssetBake sidebar panel: mode, budget, textures, maps, scope, hidden surface, Make Game Asset, Result and Export GLB, with defaults.\"\naddon: assetbake\norder: 3\nupdated: 2026-11-20\n---\n\n## Where to find it\n\nOpen the 3D viewport sidebar with `N` and choose the **AssetBake** tab. The settings panel is titled with the add-on name and version. Below it is the **Result** panel. The settings need Object Mode and are greyed out while a job runs. Hover over a control in Blender to see its tooltip.\n\n## Mode\n\nTwo buttons side by side.\n\n| Control | What it does | Default |\n|---|---|---|\n| **Game (triangles)** | All triangles, reduced to the budget. Works on every model and keeps the shape best. | On |\n| **Quad-dominant** | Quads where the model is thick enough, triangles on thin parts, in one closed mesh. When a model does not allow it, a Game asset is made instead and the result says why. | Off |\n\nWhen Quad-dominant is selected, the panel shows the note \"Quads on thick parts, triangles on thin parts.\" If your system has no Quad-dominant build, the button is greyed out and the panel says so. See [install](\u002Fdocs\u002Fassetbake\u002Finstall) for the platforms.\n\n## Budget\n\nThe title of this box changes with the mode: **Triangle budget** in Game mode, **Face budget (quads + triangles)** in Quad-dominant mode. In Quad-dominant mode a quad counts as one face.\n\n| Control | What it does | Default |\n|---|---|---|\n| Budget dropdown | Presets: 2,000, 5,000, 10,000, 20,000, 50,000, or **Custom**. | 10,000 |\n| **Triangles** \u002F **Faces** (only with Custom) | Your own number. The label says Triangles in Game mode and Faces in Quad-dominant mode. | 10,000 |\n\nThe custom value goes from 200 to 1,000,000. The slider stops at 200,000. Type a number to go higher.\n\nQuad-dominant has its own limits, and the panel shows a message when you hit one:\n\n- Under 5,000 faces it will not run. The panel says \"Quad-dominant needs at least 5,000 faces.\"\n- Under 10,000 faces the quad share drops and a fallback to Game is more likely. The mode was tuned at 10,000 faces.\n- A source above 2,000,000 triangles is not tried. A Game asset is made instead. To get quads, decimate the source first.\n- If the source already has fewer triangles than the budget allows, it is kept as it is.\n\n### Quad share estimate\n\nIn Quad-dominant mode with the Scope set to one asset for the selection, the panel takes a quick look at the wall thickness of your model before you start. It shows a line that starts with \"Expect about\" and gives a range of the share of quads. When many parts are thin it adds that a fallback to Game is possible. When most of the model is thin it says \"Mostly thin parts: will likely fall back to Game\". The estimate is a guide, not a promise. While it is measuring, the panel says \"Estimating the quad share...\". With Scope set to one asset per part, no estimate is shown, because every part is checked on its own.\n\n## Textures\n\n| Control | What it does | Default |\n|---|---|---|\n| **1k \u002F 2k \u002F 4k** | Width and height of the baked textures: 1024 x 1024, 2048 x 2048 or 4096 x 4096 pixels. | 2k |\n| **Normal** | Always baked. Shown ticked and not changeable. | On |\n| **Base Colour** | Colour of the surface. | On |\n| **Roughness** | Packed into the green channel of one combined texture. | On |\n| **Metallic** | Packed into the blue channel of the same texture. | On |\n| **Emission** | Baked only when the source glows. | On |\n| **Alpha** | Baked only when the source has transparency. Stored in the base colour. | On |\n| **AO** | Ambient occlusion, packed into the red channel of the same texture. It is the slowest map. | On |\n\nRoughness, Metallic and AO share one texture (AO in red, roughness in green, metallic in blue), the layout most game engines expect. Alpha is a cut-out: half-transparent surface such as glass becomes solid or a hole. Turn off the maps you do not need to save time.\n\n## Scope\n\n| Control | What it does | Default |\n|---|---|---|\n| Scope dropdown: **One asset for the selection** | All selected objects become one asset. | On |\n| Scope dropdown: **One asset per part** | Every separate part becomes its own asset with its own textures. A part is what stays connected after doubled vertices are merged, not an object. | Off |\n| **Remove hidden surface** | Surface that is shut in between parts and can never be seen is left out, so its triangles and texture space go to the visible surface. The mesh is open there. | On |\n\nUntick **Remove hidden surface** if you need the inner surface kept.\n\n## Selection line and the button\n\nBelow the settings the panel shows what you have selected, for example \"Selected: 1 object, 145,859 triangles\".\n\n- With nothing usable selected it says \"Select one or more mesh objects\".\n- If you select only assets that AssetBake made, it says so and offers a **Select Source** button to select the originals.\n- Above 5,000,000 triangles it warns that the job takes several minutes and several GB of memory.\n- Above 8,000,000 triangles it stops and asks you to decimate the source first.\n- In Edit Mode it says \"Go to Object Mode to make an asset\".\n\n| Control | What it does |\n|---|---|\n| **Make Game Asset** | Builds a low-poly, UV-unwrapped, textured asset from the selected objects. The work runs in the background and the selected objects are not changed. The button is greyed out when there is nothing to work on or a limit above is exceeded. |\n\nWhile a job runs, the panel shows a progress bar and a **Cancel** button.\n\n| Control | What it does |\n|---|---|\n| **Cancel** | Stops the background job. Nothing in the scene changes. |\n\nIf you switch to Edit Mode while the job runs, it keeps running. When it finishes, the panel says \"Done - return to Object Mode to get the result\". The asset appears when you are back in Object Mode.\n\n## Result panel\n\nThe **Result** panel shows what the last job did.\n\n- **Asset box:** the name of each asset and its numbers: triangles before and after (or faces, with the quad and triangle shares in Quad-dominant mode), how close the new shape is to the source, the texture size and maps, the number of UV islands, and the time.\n- **Messages:** notes and warnings about this job. See [troubleshooting](\u002Fdocs\u002Fassetbake\u002Ftroubleshooting).\n- **Select Source:** after a successful job, the original objects are hidden, not changed. Press **Select Source** to show and select them again, so you can make another version with a different budget or texture size. It also works from the viewport when you select an asset.\n- **Copy log path:** appears after a failed job. It copies the location of a log file to attach to a support request.\n\n## Export\n\nThe export box is at the bottom of the Result panel and works in Object Mode. It appears only when there is an asset to export.\n\n| Control | What it does | Default |\n|---|---|---|\n| **OpenGL \u002F DirectX** (Normal map) | OpenGL is green up: Blender, Unity, Godot, glTF. DirectX is green down: Unreal Engine. The exported normal map has its green channel flipped. | OpenGL |\n| **Also save textures** | Writes the textures as PNG files next to the GLB file. | Off |\n| **Export GLB** | Saves the asset as a GLB file for a game engine, with scale applied and roughness, metallic and occlusion packed into one texture. | |\n\n**Export GLB** exports the selected assets, or the assets of the last run when none is selected. With one asset the file gets exactly the name you type. With several assets, each gets its own file named with the name you typed, an underscore and the asset name. A quad-dominant asset is exported as the triangles the textures were baked on.\n\n## Related\n\n- Product page: [AssetBake](\u002Faddons\u002Fassetbake)\n- [Install](\u002Fdocs\u002Fassetbake\u002Finstall)\n- [Troubleshooting](\u002Fdocs\u002Fassetbake\u002Ftroubleshooting)\n",{"title":612,"description":1174},"docs\u002Fassetbake\u002Fpanel","DS8DIw7r4IStB0m-_DDz7SJ4y2VFZi-HvLZRydy0oXQ",{"id":1181,"title":1182,"addon":6,"body":1183,"description":1704,"extension":217,"meta":1705,"navigation":219,"order":1706,"path":202,"rawbody":1707,"seo":1708,"stem":1709,"updated":224,"__hash__":1710},"docs\u002Fdocs\u002Fassetbake\u002Ftroubleshooting.md","AssetBake troubleshooting",{"type":8,"value":1184,"toc":1653},[1185,1189,1203,1207,1211,1217,1221,1224,1228,1235,1239,1242,1246,1249,1253,1256,1260,1263,1266,1270,1273,1277,1280,1284,1287,1291,1294,1329,1332,1336,1339,1343,1346,1350,1354,1357,1361,1367,1371,1374,1378,1381,1385,1388,1392,1398,1402,1405,1409,1412,1416,1419,1423,1427,1430,1434,1437,1441,1444,1448,1451,1455,1458,1462,1465,1469,1492,1496,1519,1522,1554,1557,1561,1564,1568,1574,1578,1581,1585,1588,1591,1601,1604,1610,1614,1637,1639],[11,1186,1188],{"id":1187},"before-you-start","Before you start",[41,1190,1191,1192,1194,1195,1197,1198,1202],{},"Most messages appear in the ",[26,1193,121],{}," panel under the settings, or at the bottom of the Blender window. Warnings do not stop the job. They tell you what to check. If something here does not help, write to ",[55,1196,456],{"href":455}," and include the log file path (see ",[55,1199,1201],{"href":1200},"#a-job-failed","A job failed",").",[11,1204,1206],{"id":1205},"the-panel-and-the-button","The panel and the button",[376,1208,1210],{"id":1209},"select-one-or-more-mesh-objects","Select one or more mesh objects",[41,1212,1213,1214,1216],{},"Nothing usable is selected. AssetBake works on mesh objects only. Select your model in Object Mode. Helper shapes that Blender uses to draw bones, and assets that AssetBake made, are not used as a source. If you selected only assets, press ",[26,1215,977],{}," to select the originals.",[376,1218,1220],{"id":1219},"the-selected-meshes-have-no-faces","The selected meshes have no faces",[41,1222,1223],{},"The selection holds meshes without faces, for example only vertices or edges. Select a mesh that has faces.",[376,1225,1227],{"id":1226},"go-to-object-mode-to-make-an-asset","Go to Object Mode to make an asset",[41,1229,1230,1231,1234],{},"AssetBake works in Object Mode. Press ",[102,1232,1233],{},"Tab"," to leave Edit Mode. A job that is already running keeps running while you are in Edit Mode, and the asset appears when you return to Object Mode.",[376,1236,1238],{"id":1237},"done-return-to-object-mode-to-get-the-result","Done - return to Object Mode to get the result",[41,1240,1241],{},"The job has finished and is waiting. Go to Object Mode and the asset is added to the scene.",[376,1243,1245],{"id":1244},"too-large-the-limit-is-8000000-triangles","Too large: the limit is 8,000,000 triangles",[41,1247,1248],{},"The selection has more than 8,000,000 triangles. AssetBake will not start. Decimate the source first (Modifiers > Decimate), apply the modifier and run AssetBake again.",[376,1250,1252],{"id":1251},"large-input-this-takes-several-minutes-and-several-gb-of-memory","Large input: this takes several minutes and several GB of memory",[41,1254,1255],{},"Above 5,000,000 triangles the job is allowed but slow and heavy. Close other programs, or decimate the source first if your computer runs short of memory.",[376,1257,1259],{"id":1258},"texture-with-unsaved-changes","Texture with unsaved changes",[41,1261,1262],{},"A texture of your model was changed in Blender and not saved or packed. The bake would use the old picture from disk. Save or pack the image and run the job again.",[11,1264,680],{"id":1265},"quad-dominant",[376,1267,1269],{"id":1268},"quad-dominant-is-not-available-on-this-system-yet","Quad-dominant is not available on this system yet",[41,1271,1272],{},"The panel shows this, with the name of your system, when there is no Quad-dominant build for it. Quad-dominant works on macOS (Apple Silicon) and Windows (x86-64); Linux is not confirmed yet. Intel Mac is not supported yet. Game mode works everywhere. If a file saved with Quad-dominant is opened on such a system, AssetBake makes a Game asset and says so.",[376,1274,1276],{"id":1275},"quad-dominant-needs-python-311-or-newer-inside-blender","Quad-dominant needs Python 3.11 or newer inside Blender",[41,1278,1279],{},"Your Blender uses an older Python. Blender 4.2 and newer meet this. Update Blender, or use Game mode.",[376,1281,1283],{"id":1282},"quad-dominant-needs-at-least-5000-faces","Quad-dominant needs at least 5,000 faces",[41,1285,1286],{},"The face budget is too low. Raise the budget to 5,000 or more, or use Game mode. Below 10,000 faces the quad share drops and a fallback to Game is more likely, so 10,000 or more is the safe choice.",[376,1288,1290],{"id":1289},"quad-dominant-was-not-possible-here-a-game-asset-triangles-was-made-instead","Quad-dominant was not possible here, a Game asset (triangles) was made instead",[41,1292,1293],{},"The result is a normal Game asset. The message ends with the reason. The common reasons are:",[16,1295,1296,1302,1308,1314,1320],{},[19,1297,1298,1301],{},[26,1299,1300],{},"Most of the surface is thinner than one quad at this budget."," Thin sheets, leaves, cloth and shells cannot be made of quads. Raise the budget, which makes the quads smaller, or accept the Game asset.",[19,1303,1304,1307],{},[26,1305,1306],{},"The model is over 2,000,000 triangles."," Decimate it first (Modifiers > Decimate), apply the modifier and try again.",[19,1309,1310,1313],{},[26,1311,1312],{},"The quad mesh fell into more pieces than the source, has open edges where the source is closed, or does not cover or follow the source well enough."," The quad mesh did not pass AssetBake's checks, so it was not handed out. Try a neighbouring budget, for example 20,000 instead of 10,000. The result can change from one budget to the next.",[19,1315,1316,1319],{},[26,1317,1318],{},"Quad clean-up or seam repair did not settle."," Try another budget.",[19,1321,1322,1325,1326,1328],{},[26,1323,1324],{},"Layers inside the model."," Some AI models have a second skin under the visible one. With ",[26,1327,948],{}," on, AssetBake leaves those inner layers out. With it off, such a file becomes a Game asset.",[41,1330,1331],{},"About one model in eight that is thick enough still falls back for a small local defect. This is a known limit. The Game asset is still a full, textured result.",[376,1333,1335],{"id":1334},"the-budget-is-x-faces-the-asset-has-y","The budget is X faces, the asset has Y",[41,1337,1338],{},"The quad mesh did not get closer to your budget. The asset is usable. Try a different budget if the count matters.",[376,1340,1342],{"id":1341},"expect-about-x-y-quads-or-a-fallback-to-game-many-thin-parts","Expect about X-Y % quads, or a fallback to Game: many thin parts",[41,1344,1345],{},"This is the estimate before the run, not an error. Many thin parts will become triangles, and the run may fall back to Game.",[11,1347,1349],{"id":1348},"messages-after-a-job","Messages after a job",[376,1351,1353],{"id":1352},"the-budget-is-x-triangles-the-asset-has-y","The budget is X triangles, the asset has Y",[41,1355,1356],{},"Game mode could not reduce the mesh further. What is left are tangled or separate pieces that fall apart when merged more. The asset is usable. Raise the budget if you want a cleaner result.",[376,1358,1360],{"id":1359},"the-budget-is-x-triangles-the-asset-has-only-y","The budget is X triangles, the asset has only Y",[41,1362,1363,1364,1366],{},"The asset has fewer triangles than the budget. Either the visible surface left after hidden surface was removed is small, or the source has no more usable triangles after cleaning. Untick ",[26,1365,948],{}," to get closer to the budget.",[376,1368,1370],{"id":1369},"the-source-already-has-fewer-triangles-than-the-budget","The source already has fewer triangles than the budget",[41,1372,1373],{},"Nothing needed reducing, so the geometry is kept as it is. UVs and textures are still made. Since 0.2.6, Game mode says so before the run: \"The source has N triangles, under the budget of M: nothing to reduce, it is kept as it is.\"",[376,1375,1377],{"id":1376},"the-low-mesh-leaves-the-source-shape-by-x-of-the-size-try-a-higher-budget","The low mesh leaves the source shape by X % of the size. Try a higher budget",[41,1379,1380],{},"The new mesh differs noticeably from the source. Raise the triangle budget.",[376,1382,1384],{"id":1383},"parts-of-the-source-are-tangled","Parts of the source are tangled",[41,1386,1387],{},"Some faces share an edge with several neighbours or touch at single points. To keep your budget, AssetBake merged points that are close together. Those places can look rougher than the rest. Raise the budget or clean the source in Blender.",[376,1389,1391],{"id":1390},"x-of-the-surface-is-enclosed-by-other-surface-and-was-removed","X of the surface is enclosed by other surface and was removed",[41,1393,1394,1395,1397],{},"Hidden surface was removed, so the mesh is open there. Untick ",[26,1396,948],{}," if you want it kept.",[376,1399,1401],{"id":1400},"the-bake-found-no-source-surface-the-textures-are-empty","The bake found no source surface: the textures are empty",[41,1403,1404],{},"Nothing was found to bake from. Check that the source has visible faces and that you did not select the wrong objects.",[376,1406,1408],{"id":1407},"parts-of-the-texture-look-smeared-or-filled-in","Parts of the texture look smeared or filled in",[41,1410,1411],{},"A small part of the texture could not be baked and was filled from its neighbours. The back-of-surface message appears on one-sided sheets and where parts almost touch. A few percent are normal. If the texture looks wrong, try a higher budget or a bigger texture size.",[376,1413,1415],{"id":1414},"tiny-triangles-have-no-texture","Tiny triangles have no texture",[41,1417,1418],{},"A few tiny triangles have no space on the texture. This is reported as a count and does not change the look.",[11,1420,1422],{"id":1421},"materials-and-textures","Materials and textures",[376,1424,1426],{"id":1425},"texture-file-not-found","Texture file not found",[41,1428,1429],{},"The source refers to an image that Blender cannot find on disk. Restore the file or pack it into the .blend file, then run the job again.",[376,1431,1433],{"id":1432},"materials-have-no-principled-bsdf-or-emission-shader-and-were-baked-as-plain-grey","Material(s) have no Principled BSDF or Emission shader and were baked as plain grey",[41,1435,1436],{},"AssetBake reads the Principled BSDF or Emission shader on the surface. A shader inside a node group is not read. Move the shader out of the group, or replace the material with a plain Principled BSDF.",[376,1438,1440],{"id":1439},"faces-without-a-readable-material-were-baked-from-the-vertex-colours","Faces without a readable material were baked from the vertex colours",[41,1442,1443],{},"Information only. Models from some AI services carry their colour in vertex colours, and AssetBake used it.",[376,1445,1447],{"id":1446},"unlit-materials-the-emitted-colour-was-baked-as-the-base-colour","Unlit material(s): the emitted colour was baked as the base colour",[41,1449,1450],{},"Information only. The material emits its colour without lighting, and that colour became the base colour.",[376,1452,1454],{"id":1453},"transparency-is-baked-as-a-cut-out","Transparency is baked as a cut-out",[41,1456,1457],{},"Alpha is stored as a cut-out. Half-transparent surface such as glass becomes solid or a hole. There is no partial transparency in the result.",[376,1459,1461],{"id":1460},"the-source-has-transparent-parts-so-surface-behind-them-was-kept","The source has transparent parts, so surface behind them was kept",[41,1463,1464],{},"Information only. Surface behind transparent parts is not treated as hidden.",[11,1466,1468],{"id":1467},"rigs-shape-keys-and-modifiers","Rigs, shape keys and modifiers",[16,1470,1471,1477,1483,1489],{},[19,1472,1473,1476],{},[26,1474,1475],{},"The source is rigged."," The asset is built from the rest shape. The armature, the weights and the animation are not carried over. AssetBake gives you a static asset.",[19,1478,1479,1482],{},[26,1480,1481],{},"The source has shape keys."," The basis shape is used and the shape keys are dropped.",[19,1484,1485,1488],{},[26,1486,1487],{},"Modifiers of the source were applied for the asset."," The source itself is not changed.",[19,1490,1491],{},"Linked objects from a library are not handled as a source.",[11,1493,1495],{"id":1494},"scope-messages","Scope messages",[16,1497,1498,1507,1513],{},[19,1499,1500,1503,1504,1506],{},[26,1501,1502],{},"The selection has too many separate parts for one asset each: one asset was built for the whole selection."," With ",[26,1505,936],{},", AssetBake built a single asset because there were too many parts.",[19,1508,1509,1512],{},[26,1510,1511],{},"The selection falls into more than 2,000 loose pieces: one asset was built for the whole selection."," Same result for the same reason.",[19,1514,1515,1518],{},[26,1516,1517],{},"Small loose pieces were kept with the nearest large part."," Information only.",[11,1520,977],{"id":1521},"select-source",[16,1523,1524,1530,1536,1542,1548],{},[19,1525,1526,1529],{},[26,1527,1528],{},"Select an asset made with Make Game Asset first."," Select an asset that AssetBake made.",[19,1531,1532,1535],{},[26,1533,1534],{},"This asset does not remember its source (it was made with an older version)."," Unhide the original objects in the Outliner.",[19,1537,1538,1541],{},[26,1539,1540],{},"The source is not in this scene any more."," The original was deleted, or renamed after the file was reopened. Bring it back or select the model again by hand.",[19,1543,1544,1547],{},[26,1545,1546],{},"The source is in a collection that is hidden or switched off."," Show the collection, then try again.",[19,1549,1550,1553],{},[26,1551,1552],{},"Selected X of Y source objects; ..."," Some sources could not be selected. The text after the semicolon says why.",[11,1555,28],{"id":1556},"export-glb",[376,1558,1560],{"id":1559},"select-an-asset-made-with-make-game-asset","Select an asset made with Make Game Asset",[41,1562,1563],{},"Nothing exportable is selected. Select an asset that AssetBake made, or run a job first. With nothing selected, the assets of the last run are exported.",[376,1565,1567],{"id":1566},"blenders-gltf-20-add-on-is-switched-off","Blender's glTF 2.0 add-on is switched off",[41,1569,136,1570,1573],{},[26,1571,1572],{},"Edit > Preferences > Add-ons",", find the glTF 2.0 add-on (Import-Export: glTF 2.0 format) and switch it on.",[376,1575,1577],{"id":1576},"export-failed","Export failed",[41,1579,1580],{},"The file could not be written. Check that the folder exists, that you may write to it and that the disk has room. The message includes Blender's own reason.",[376,1582,1584],{"id":1583},"the-asset-was-edited-after-it-was-made","The asset was edited after it was made",[41,1586,1587],{},"The triangles of the asset no longer match the ones the textures were baked on, so the normal map can show small errors where faces changed. For an exact result, make the asset again from the source.",[11,1589,1201],{"id":1590},"a-job-failed",[41,1592,1593,1594,1597,1598,1600],{},"If a job fails, the Result panel shows \"The job failed\" with a short reason and a ",[26,1595,1596],{},"Copy log path"," button. The button copies the location of a log file. Attach that file to an email to ",[55,1599,456],{"href":455}," and include your Blender version, your system and the size of the model. Reply time is within 24 hours.",[41,1602,1603],{},"If the message is \"Could not start the background job\", Blender could not create its working files or start the second Blender that does the work. Check free disk space and that Blender is allowed to write to its temporary folder.",[41,1605,1606,1607,1609],{},"If you press ",[26,1608,1014],{},", the panel says \"Cancelled. Nothing was changed.\" The job stops and the scene stays as it was. If you open another .blend file while a job runs, the job is cancelled.",[11,1611,1613],{"id":1612},"known-limits","Known limits",[16,1615,1616,1619,1622,1625,1628,1631,1634],{},[19,1617,1618],{},"Hard edges that a glTF file stores only as custom normals are lost. Edges sharper than 30 degrees survive only on sources with flat faces or marked sharp edges.",[19,1620,1621],{},"Tiny parts can get no UV area.",[19,1623,1624],{},"Alpha is a cut-out only.",[19,1626,1627],{},"Export is GLB only. There is no FBX export and there are no engine presets.",[19,1629,1630],{},"The result has no rig and no animation.",[19,1632,1633],{},"Quad-dominant does not rebuild clean edge flow. It is not retopology. The seam triangles between quads and thin parts are closed but can be stretched.",[19,1635,1636],{},"Intel Mac: not supported yet. AssetBake Lite is not tested on Windows.",[11,1638,185],{"id":184},[16,1640,1641,1645,1649],{},[19,1642,190,1643],{},[55,1644,111],{"href":180},[19,1646,1647],{},[55,1648,315],{"href":220},[19,1650,1651],{},[55,1652,197],{"href":128},{"title":205,"searchDepth":206,"depth":206,"links":1654},[1655,1656,1665,1673,1684,1692,1693,1694,1695,1701,1702,1703],{"id":1187,"depth":206,"text":1188},{"id":1205,"depth":206,"text":1206,"children":1657},[1658,1659,1660,1661,1662,1663,1664],{"id":1209,"depth":468,"text":1210},{"id":1219,"depth":468,"text":1220},{"id":1226,"depth":468,"text":1227},{"id":1237,"depth":468,"text":1238},{"id":1244,"depth":468,"text":1245},{"id":1251,"depth":468,"text":1252},{"id":1258,"depth":468,"text":1259},{"id":1265,"depth":206,"text":680,"children":1666},[1667,1668,1669,1670,1671,1672],{"id":1268,"depth":468,"text":1269},{"id":1275,"depth":468,"text":1276},{"id":1282,"depth":468,"text":1283},{"id":1289,"depth":468,"text":1290},{"id":1334,"depth":468,"text":1335},{"id":1341,"depth":468,"text":1342},{"id":1348,"depth":206,"text":1349,"children":1674},[1675,1676,1677,1678,1679,1680,1681,1682,1683],{"id":1352,"depth":468,"text":1353},{"id":1359,"depth":468,"text":1360},{"id":1369,"depth":468,"text":1370},{"id":1376,"depth":468,"text":1377},{"id":1383,"depth":468,"text":1384},{"id":1390,"depth":468,"text":1391},{"id":1400,"depth":468,"text":1401},{"id":1407,"depth":468,"text":1408},{"id":1414,"depth":468,"text":1415},{"id":1421,"depth":206,"text":1422,"children":1685},[1686,1687,1688,1689,1690,1691],{"id":1425,"depth":468,"text":1426},{"id":1432,"depth":468,"text":1433},{"id":1439,"depth":468,"text":1440},{"id":1446,"depth":468,"text":1447},{"id":1453,"depth":468,"text":1454},{"id":1460,"depth":468,"text":1461},{"id":1467,"depth":206,"text":1468},{"id":1494,"depth":206,"text":1495},{"id":1521,"depth":206,"text":977},{"id":1556,"depth":206,"text":28,"children":1696},[1697,1698,1699,1700],{"id":1559,"depth":468,"text":1560},{"id":1566,"depth":468,"text":1567},{"id":1576,"depth":468,"text":1577},{"id":1583,"depth":468,"text":1584},{"id":1590,"depth":206,"text":1201},{"id":1612,"depth":206,"text":1613},{"id":184,"depth":206,"text":185},"Fix AssetBake problems in Blender: Quad-dominant not available, fallback to Game, size limits, missing textures, empty bake, GLB export errors and known limits.",{},4,"---\ntitle: \"AssetBake troubleshooting\"\ndescription: \"Fix AssetBake problems in Blender: Quad-dominant not available, fallback to Game, size limits, missing textures, empty bake, GLB export errors and known limits.\"\naddon: assetbake\norder: 4\nupdated: 2026-11-20\n---\n\n## Before you start\n\nMost messages appear in the **Result** panel under the settings, or at the bottom of the Blender window. Warnings do not stop the job. They tell you what to check. If something here does not help, write to support@mendboxstudio.com and include the log file path (see [A job failed](#a-job-failed)).\n\n## The panel and the button\n\n### Select one or more mesh objects\n\nNothing usable is selected. AssetBake works on mesh objects only. Select your model in Object Mode. Helper shapes that Blender uses to draw bones, and assets that AssetBake made, are not used as a source. If you selected only assets, press **Select Source** to select the originals.\n\n### The selected meshes have no faces\n\nThe selection holds meshes without faces, for example only vertices or edges. Select a mesh that has faces.\n\n### Go to Object Mode to make an asset\n\nAssetBake works in Object Mode. Press `Tab` to leave Edit Mode. A job that is already running keeps running while you are in Edit Mode, and the asset appears when you return to Object Mode.\n\n### Done - return to Object Mode to get the result\n\nThe job has finished and is waiting. Go to Object Mode and the asset is added to the scene.\n\n### Too large: the limit is 8,000,000 triangles\n\nThe selection has more than 8,000,000 triangles. AssetBake will not start. Decimate the source first (Modifiers > Decimate), apply the modifier and run AssetBake again.\n\n### Large input: this takes several minutes and several GB of memory\n\nAbove 5,000,000 triangles the job is allowed but slow and heavy. Close other programs, or decimate the source first if your computer runs short of memory.\n\n### Texture with unsaved changes\n\nA texture of your model was changed in Blender and not saved or packed. The bake would use the old picture from disk. Save or pack the image and run the job again.\n\n## Quad-dominant\n\n### Quad-dominant is not available on this system yet\n\nThe panel shows this, with the name of your system, when there is no Quad-dominant build for it. Quad-dominant works on macOS (Apple Silicon) and Windows (x86-64); Linux is not confirmed yet. Intel Mac is not supported yet. Game mode works everywhere. If a file saved with Quad-dominant is opened on such a system, AssetBake makes a Game asset and says so.\n\n### Quad-dominant needs Python 3.11 or newer inside Blender\n\nYour Blender uses an older Python. Blender 4.2 and newer meet this. Update Blender, or use Game mode.\n\n### Quad-dominant needs at least 5,000 faces\n\nThe face budget is too low. Raise the budget to 5,000 or more, or use Game mode. Below 10,000 faces the quad share drops and a fallback to Game is more likely, so 10,000 or more is the safe choice.\n\n### Quad-dominant was not possible here, a Game asset (triangles) was made instead\n\nThe result is a normal Game asset. The message ends with the reason. The common reasons are:\n\n- **Most of the surface is thinner than one quad at this budget.** Thin sheets, leaves, cloth and shells cannot be made of quads. Raise the budget, which makes the quads smaller, or accept the Game asset.\n- **The model is over 2,000,000 triangles.** Decimate it first (Modifiers > Decimate), apply the modifier and try again.\n- **The quad mesh fell into more pieces than the source, has open edges where the source is closed, or does not cover or follow the source well enough.** The quad mesh did not pass AssetBake's checks, so it was not handed out. Try a neighbouring budget, for example 20,000 instead of 10,000. The result can change from one budget to the next.\n- **Quad clean-up or seam repair did not settle.** Try another budget.\n- **Layers inside the model.** Some AI models have a second skin under the visible one. With **Remove hidden surface** on, AssetBake leaves those inner layers out. With it off, such a file becomes a Game asset.\n\nAbout one model in eight that is thick enough still falls back for a small local defect. This is a known limit. The Game asset is still a full, textured result.\n\n### The budget is X faces, the asset has Y\n\nThe quad mesh did not get closer to your budget. The asset is usable. Try a different budget if the count matters.\n\n### Expect about X-Y % quads, or a fallback to Game: many thin parts\n\nThis is the estimate before the run, not an error. Many thin parts will become triangles, and the run may fall back to Game.\n\n## Messages after a job\n\n### The budget is X triangles, the asset has Y\n\nGame mode could not reduce the mesh further. What is left are tangled or separate pieces that fall apart when merged more. The asset is usable. Raise the budget if you want a cleaner result.\n\n### The budget is X triangles, the asset has only Y\n\nThe asset has fewer triangles than the budget. Either the visible surface left after hidden surface was removed is small, or the source has no more usable triangles after cleaning. Untick **Remove hidden surface** to get closer to the budget.\n\n### The source already has fewer triangles than the budget\n\nNothing needed reducing, so the geometry is kept as it is. UVs and textures are still made. Since 0.2.6, Game mode says so before the run: \"The source has N triangles, under the budget of M: nothing to reduce, it is kept as it is.\"\n\n### The low mesh leaves the source shape by X % of the size. Try a higher budget\n\nThe new mesh differs noticeably from the source. Raise the triangle budget.\n\n### Parts of the source are tangled\n\nSome faces share an edge with several neighbours or touch at single points. To keep your budget, AssetBake merged points that are close together. Those places can look rougher than the rest. Raise the budget or clean the source in Blender.\n\n### X of the surface is enclosed by other surface and was removed\n\nHidden surface was removed, so the mesh is open there. Untick **Remove hidden surface** if you want it kept.\n\n### The bake found no source surface: the textures are empty\n\nNothing was found to bake from. Check that the source has visible faces and that you did not select the wrong objects.\n\n### Parts of the texture look smeared or filled in\n\nA small part of the texture could not be baked and was filled from its neighbours. The back-of-surface message appears on one-sided sheets and where parts almost touch. A few percent are normal. If the texture looks wrong, try a higher budget or a bigger texture size.\n\n### Tiny triangles have no texture\n\nA few tiny triangles have no space on the texture. This is reported as a count and does not change the look.\n\n## Materials and textures\n\n### Texture file not found\n\nThe source refers to an image that Blender cannot find on disk. Restore the file or pack it into the .blend file, then run the job again.\n\n### Material(s) have no Principled BSDF or Emission shader and were baked as plain grey\n\nAssetBake reads the Principled BSDF or Emission shader on the surface. A shader inside a node group is not read. Move the shader out of the group, or replace the material with a plain Principled BSDF.\n\n### Faces without a readable material were baked from the vertex colours\n\nInformation only. Models from some AI services carry their colour in vertex colours, and AssetBake used it.\n\n### Unlit material(s): the emitted colour was baked as the base colour\n\nInformation only. The material emits its colour without lighting, and that colour became the base colour.\n\n### Transparency is baked as a cut-out\n\nAlpha is stored as a cut-out. Half-transparent surface such as glass becomes solid or a hole. There is no partial transparency in the result.\n\n### The source has transparent parts, so surface behind them was kept\n\nInformation only. Surface behind transparent parts is not treated as hidden.\n\n## Rigs, shape keys and modifiers\n\n- **The source is rigged.** The asset is built from the rest shape. The armature, the weights and the animation are not carried over. AssetBake gives you a static asset.\n- **The source has shape keys.** The basis shape is used and the shape keys are dropped.\n- **Modifiers of the source were applied for the asset.** The source itself is not changed.\n- Linked objects from a library are not handled as a source.\n\n## Scope messages\n\n- **The selection has too many separate parts for one asset each: one asset was built for the whole selection.** With **One asset per part**, AssetBake built a single asset because there were too many parts.\n- **The selection falls into more than 2,000 loose pieces: one asset was built for the whole selection.** Same result for the same reason.\n- **Small loose pieces were kept with the nearest large part.** Information only.\n\n## Select Source\n\n- **Select an asset made with Make Game Asset first.** Select an asset that AssetBake made.\n- **This asset does not remember its source (it was made with an older version).** Unhide the original objects in the Outliner.\n- **The source is not in this scene any more.** The original was deleted, or renamed after the file was reopened. Bring it back or select the model again by hand.\n- **The source is in a collection that is hidden or switched off.** Show the collection, then try again.\n- **Selected X of Y source objects; ...** Some sources could not be selected. The text after the semicolon says why.\n\n## Export GLB\n\n### Select an asset made with Make Game Asset\n\nNothing exportable is selected. Select an asset that AssetBake made, or run a job first. With nothing selected, the assets of the last run are exported.\n\n### Blender's glTF 2.0 add-on is switched off\n\nOpen **Edit > Preferences > Add-ons**, find the glTF 2.0 add-on (Import-Export: glTF 2.0 format) and switch it on.\n\n### Export failed\n\nThe file could not be written. Check that the folder exists, that you may write to it and that the disk has room. The message includes Blender's own reason.\n\n### The asset was edited after it was made\n\nThe triangles of the asset no longer match the ones the textures were baked on, so the normal map can show small errors where faces changed. For an exact result, make the asset again from the source.\n\n## A job failed\n\nIf a job fails, the Result panel shows \"The job failed\" with a short reason and a **Copy log path** button. The button copies the location of a log file. Attach that file to an email to support@mendboxstudio.com and include your Blender version, your system and the size of the model. Reply time is within 24 hours.\n\nIf the message is \"Could not start the background job\", Blender could not create its working files or start the second Blender that does the work. Check free disk space and that Blender is allowed to write to its temporary folder.\n\nIf you press **Cancel**, the panel says \"Cancelled. Nothing was changed.\" The job stops and the scene stays as it was. If you open another .blend file while a job runs, the job is cancelled.\n\n## Known limits\n\n- Hard edges that a glTF file stores only as custom normals are lost. Edges sharper than 30 degrees survive only on sources with flat faces or marked sharp edges.\n- Tiny parts can get no UV area.\n- Alpha is a cut-out only.\n- Export is GLB only. There is no FBX export and there are no engine presets.\n- The result has no rig and no animation.\n- Quad-dominant does not rebuild clean edge flow. It is not retopology. The seam triangles between quads and thin parts are closed but can be stretched.\n- Intel Mac: not supported yet. AssetBake Lite is not tested on Windows.\n\n## Related\n\n- Product page: [AssetBake](\u002Faddons\u002Fassetbake)\n- [Install](\u002Fdocs\u002Fassetbake\u002Finstall)\n- [Panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel)\n",{"title":1182,"description":1704},"docs\u002Fassetbake\u002Ftroubleshooting","PYo6q7Ysby5A-c5z5FYrL9uHbtUaFBQAho9TOZMKLIg",{"id":1712,"title":1713,"blender":1714,"body":1715,"buy":2073,"description":2082,"extension":217,"lite":2083,"meta":2085,"name":111,"navigation":219,"os":2086,"path":180,"poster":2087,"price":1729,"problem":2088,"rawbody":2089,"seo":2090,"status":2091,"stem":2092,"updated":224,"version":2093,"video":2094,"youtube":2095,"__hash__":2096},"addons\u002Faddons\u002Fassetbake.md","AssetBake: AI Model to Game Asset in Blender","4.2 and newer",{"type":8,"value":1716,"toc":2060},[1717,1721,1724,1735,1739,1742,1749,1755,1759,1762,1768,1772,1775,1781,1785,1788,1794,1798,1819,1828,1832,1835,1841,1845,1952,1956,1962,1966,1972,1978,1984,1990,1996,2002,2013,2019,2023,2044],[11,1718,1720],{"id":1719},"ai-model-with-too-many-polygons-for-a-game","AI model with too many polygons for a game?",[41,1722,1723],{},"A model from Meshy, Tripo or Hunyuan3D looks fine in the preview, then you open it in Blender and it has a hundred thousand triangles or more, UVs that are a scatter of tiny islands and textures baked for that heavy mesh. A game engine wants a few thousand triangles, clean UVs and a small set of PBR textures. Doing that by hand means a decimate, a fresh unwrap and a texture bake, with settings you have to get right every time.",[41,1725,1726,1727,1730,1731,1734],{},"AssetBake reduces the polygon count of the heavy model to your triangle budget, with no manual decimate or remesh, unwraps new UVs, bakes PBR textures and exports a GLB. Launch price ",[26,1728,1729],{},"$18",", later ",[26,1732,1733],{},"$24",". Blender 4.2 and newer.",[11,1736,1738],{"id":1737},"reduce-the-polygon-count-to-a-budget","Reduce the polygon count to a budget",[41,1740,1741],{},"145,859 triangles became 9,999 on our test model, with the surface within 0.03% of the model size. You pick the budget: 2,000 for mobile, 10,000 to 20,000 for PC, 50,000 for a hero asset.",[41,1743,1744],{},[1745,1746],"img",{"alt":1747,"src":1748},"Wireframe of the heavy AI model and of the low-poly result at the chosen triangle budget","\u002Fmedia\u002Fassetbake-wire.webp",[41,1750,1751],{},[1745,1752],{"alt":1753,"src":1754},"The same AI model at different triangle budgets: the shape stays while the triangle count drops","\u002Fmedia\u002Fassetbake-budget.webp",[11,1756,1758],{"id":1757},"new-uvs-on-the-new-mesh","New UVs on the new mesh",[41,1760,1761],{},"The low-poly mesh gets its own UV layout, so the baked textures have room and no stretched islands from the original.",[41,1763,1764],{},[1745,1765],{"alt":1766,"src":1767},"New UV layout of the low-poly asset next to the textured result","\u002Fmedia\u002Fassetbake-uv.webp",[11,1769,1771],{"id":1770},"textures-that-match","Textures that match",[41,1773,1774],{},"The look of the original is baked onto the new mesh: normal map, base colour, and one ORM texture with AO, roughness and metallic. Metal keeps its colour. Emission and alpha are baked when the model has them.",[41,1776,1777],{},[1745,1778],{"alt":1779,"src":1780},"Baked texture set on the low-poly asset: normal map, base colour and the ORM texture","\u002Fmedia\u002Fassetbake-maps.webp",[11,1782,1784],{"id":1783},"blender-stays-yours","Blender stays yours",[41,1786,1787],{},"The job runs in a background process with a progress bar and Cancel. Your original is hidden, never changed. One undo removes the result.",[41,1789,1790],{},[1745,1791],{"alt":1792,"src":1793},"Blender stays usable while AssetBake works on the asset in the background, with a progress bar and Cancel","\u002Fmedia\u002Fassetbake-background.webp",[11,1795,1797],{"id":1796},"how-it-works","How it works",[69,1799,1800,1806,1814],{},[19,1801,1802,1805],{},[26,1803,1804],{},"Select"," your model in Blender and open the AssetBake tab (press N).",[19,1807,1808,1811,1812,29],{},[26,1809,1810],{},"Choose"," a triangle budget and texture size, then press ",[26,1813,351],{},[19,1815,1816,1818],{},[26,1817,1085],{}," a GLB for Unity, Unreal Engine, Godot or the web.",[41,1820,1821,1822,1824,1825,29],{},"Every control is described in the ",[55,1823,129],{"href":128},". Installation is on the ",[55,1826,1827],{"href":220},"install page",[11,1829,1831],{"id":1830},"game-mode-and-quad-dominant","Game mode and Quad-dominant",[41,1833,1834],{},"Game mode gives a triangle mesh on every platform. Quad-dominant keeps quads on thick parts and triangles on thin parts, for assets you will edit or rig. It runs on macOS (Apple Silicon) and Windows (x86-64). It is not retopology.",[41,1836,1837],{},[1745,1838],{"alt":1839,"src":1840},"Quad-dominant mode: quads on the body of the asset, triangles on thin parts","\u002Fmedia\u002Fassetbake-quads.webp",[11,1842,1844],{"id":1843},"lite-and-full-version","Lite and full version",[639,1846,1847,1859],{},[642,1848,1849],{},[645,1850,1851,1853,1856],{},[648,1852],{},[648,1854,1855],{},"Lite (free)",[648,1857,1858],{},"Full",[658,1860,1861,1871,1881,1891,1902,1913,1922,1932,1941],{},[645,1862,1863,1866,1869],{},[663,1864,1865],{},"Game mode (triangles)",[663,1867,1868],{},"yes",[663,1870,1868],{},[645,1872,1873,1876,1879],{},[663,1874,1875],{},"Quad-dominant mode",[663,1877,1878],{},"no",[663,1880,1868],{},[645,1882,1883,1885,1888],{},[663,1884,703],{},[663,1886,1887],{},"1,000 \u002F 2,000 \u002F 5,000",[663,1889,1890],{},"2,000 to 50,000 presets, Custom 200 to 1,000,000",[645,1892,1893,1896,1899],{},[663,1894,1895],{},"Texture size",[663,1897,1898],{},"1k",[663,1900,1901],{},"1k, 2k, 4k",[645,1903,1904,1907,1910],{},[663,1905,1906],{},"Maps",[663,1908,1909],{},"Normal, Base Colour, AO",[663,1911,1912],{},"Normal, Base Colour, Roughness, Metallic, Emission, Alpha, AO",[645,1914,1915,1917,1919],{},[663,1916,902],{},[663,1918,924],{},[663,1920,1921],{},"One asset for the selection, or one asset per part",[645,1923,1924,1927,1929],{},[663,1925,1926],{},"Normal map for export",[663,1928,1116],{},[663,1930,1931],{},"OpenGL or DirectX",[645,1933,1934,1937,1939],{},[663,1935,1936],{},"Background job, Cancel, Remove hidden surface, Select Source, GLB export, Also save textures",[663,1938,1868],{},[663,1940,1868],{},[645,1942,1943,1946,1949],{},[663,1944,1945],{},"Where",[663,1947,1948],{},"GitHub, Blendkit",[663,1950,1951],{},"Gumroad, Superhive (listing in review). Blendkit: Game-mode build",[11,1953,1955],{"id":1954},"compatibility","Compatibility",[41,1957,1958,1959,29],{},"Blender 4.2 LTS, 4.5 LTS and 5.2. macOS (Apple Silicon) and Windows (x86-64), Game and Quad-dominant on both. Linux: not confirmed yet. Intel Mac: not supported yet. AssetBake Lite was tested on macOS and Linux (x86-64), not on Windows. GLB checked in Godot 4; guides for Unity, Unreal Engine 5 and three.js are in the ",[55,1960,1961],{"href":474},"documentation",[11,1963,1965],{"id":1964},"faq","FAQ",[41,1967,1968,1971],{},[26,1969,1970],{},"Does it change my original model?"," No. It is hidden, never modified. Select Source brings it back.",[41,1973,1974,1977],{},[26,1975,1976],{},"Is this retopology?"," No. Game mode makes a triangle mesh at your budget. Quad-dominant makes mostly quads on thick parts and triangles on thin parts.",[41,1979,1980,1983],{},[26,1981,1982],{},"Does it keep my rig or animation?"," No. You get a static asset in the rest pose.",[41,1985,1986,1989],{},[26,1987,1988],{},"Does it work on Windows?"," Yes, on Windows (x86-64), with Game and Quad-dominant mode. AssetBake Lite is not tested on Windows. Intel Mac is not supported yet.",[41,1991,1992,1995],{},[26,1993,1994],{},"How long does it take?"," Usually 10 seconds to 1 minute at 2k textures. A 1.7 million triangle source took about 45 seconds at 1k textures on Apple Silicon.",[41,1997,1998,2001],{},[26,1999,2000],{},"Which engines?"," Any that reads GLB: Unity, Unreal Engine 5, Godot 4, three.js. Use DirectX normals for Unreal.",[41,2003,2004,2007,2008,2012],{},[26,2005,2006],{},"Can I try it free?"," Yes: ",[55,2009,2011],{"href":161,"rel":2010},[59],"AssetBake Lite on GitHub"," and on Blendkit. Lite is not tested on Windows.",[41,2014,2015,2018],{},[26,2016,2017],{},"Can I use the result commercially?"," AssetBake adds no restrictions. Check the terms of your source model and the AI service that made it.",[11,2020,2022],{"id":2021},"how-to-buy","How to buy",[41,2024,2025,2026,2030,2031,2036,2037,2039,2040,1202],{},"AssetBake costs $18 at launch, $24 later. Buy it on ",[55,2027,60],{"href":2028,"rel":2029},"https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=assetbake",[59]," or ",[55,2032,2035],{"href":2033,"rel":2034},"https:\u002F\u002Fwww.blendkit.com\u002Fasset-gallery-detail\u002Fc85a3662-5ba0-46c1-b3e7-061d966226bf\u002F?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=assetbake",[59],"BlendKit",". The Superhive listing is in review and will be linked here once it is live. Questions go to ",[55,2038,456],{"href":455},", with a reply within 24 hours. Built and tested by Pavel at Mendbox Studio (",[55,2041,2043],{"href":2042},"\u002Fabout","about",[41,2045,2046,2047,2050,2051,2054,2055,2059],{},"After purchase, follow the ",[55,2048,2049],{"href":220},"install steps",", then open the ",[55,2052,2053],{"href":474},"documentation overview",". The ",[55,2056,2058],{"href":2057},"\u002Fdocs\u002Fassetbake#version-history","version history"," lists what each version changed.",{"title":205,"searchDepth":206,"depth":206,"links":2061},[2062,2063,2064,2065,2066,2067,2068,2069,2070,2071,2072],{"id":1719,"depth":206,"text":1720},{"id":1737,"depth":206,"text":1738},{"id":1757,"depth":206,"text":1758},{"id":1770,"depth":206,"text":1771},{"id":1783,"depth":206,"text":1784},{"id":1796,"depth":206,"text":1797},{"id":1830,"depth":206,"text":1831},{"id":1843,"depth":206,"text":1844},{"id":1954,"depth":206,"text":1955},{"id":1964,"depth":206,"text":1965},{"id":2021,"depth":206,"text":2022},[2074,2077,2080],{"label":2075,"to":2076},"Buy on Gumroad","https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake",{"label":2078,"to":2079},"Buy on BlendKit","https:\u002F\u002Fwww.blendkit.com\u002Fasset-gallery-detail\u002Fc85a3662-5ba0-46c1-b3e7-061d966226bf\u002F",{"label":2081,"to":161},"Free Lite on GitHub","Turn a Meshy, Tripo or Hunyuan3D model into a game asset in Blender: low-poly mesh, new UVs, baked PBR textures, GLB export. Runs in the background.",{"summary":2084,"to":161},"AssetBake Lite is free and open source. It has Game mode with budgets of 1,000, 2,000 or 5,000 triangles, 1k textures and Normal, Base Colour and AO maps. Quad-dominant mode, bigger budgets and the other maps are in the full version.",{},"Windows, macOS","\u002Fmedia\u002Fassetbake.jpg","Turn an AI model into a game asset in Blender. One click.","---\ntitle: \"AssetBake: AI Model to Game Asset in Blender\"\ndescription: \"Turn a Meshy, Tripo or Hunyuan3D model into a game asset in Blender: low-poly mesh, new UVs, baked PBR textures, GLB export. Runs in the background.\"\nname: AssetBake\nprice: \"$18\"\nstatus: released\nproblem: \"Turn an AI model into a game asset in Blender. One click.\"\nversion: \"0.2.6\"\nblender: \"4.2 and newer\"\nvideo: \u002Fmedia\u002Fassetbake.mp4\nposter: \u002Fmedia\u002Fassetbake.jpg\nos: \"Windows, macOS\"\nbuy:\n  - label: \"Buy on Gumroad\"\n    to: \"https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake\"\n  - label: \"Buy on BlendKit\"\n    to: \"https:\u002F\u002Fwww.blendkit.com\u002Fasset-gallery-detail\u002Fc85a3662-5ba0-46c1-b3e7-061d966226bf\u002F\"\n  - label: \"Free Lite on GitHub\"\n    to: \"https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fassetbake-lite\"\nlite:\n  summary: \"AssetBake Lite is free and open source. It has Game mode with budgets of 1,000, 2,000 or 5,000 triangles, 1k textures and Normal, Base Colour and AO maps. Quad-dominant mode, bigger budgets and the other maps are in the full version.\"\n  to: \"https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fassetbake-lite\"\nupdated: 2026-11-20\n---\n\n## AI model with too many polygons for a game?\n\nA model from Meshy, Tripo or Hunyuan3D looks fine in the preview, then you open it in Blender and it has a hundred thousand triangles or more, UVs that are a scatter of tiny islands and textures baked for that heavy mesh. A game engine wants a few thousand triangles, clean UVs and a small set of PBR textures. Doing that by hand means a decimate, a fresh unwrap and a texture bake, with settings you have to get right every time.\n\nAssetBake reduces the polygon count of the heavy model to your triangle budget, with no manual decimate or remesh, unwraps new UVs, bakes PBR textures and exports a GLB. Launch price **$18**, later **$24**. Blender 4.2 and newer.\n\n## Reduce the polygon count to a budget\n\n145,859 triangles became 9,999 on our test model, with the surface within 0.03% of the model size. You pick the budget: 2,000 for mobile, 10,000 to 20,000 for PC, 50,000 for a hero asset.\n\n![Wireframe of the heavy AI model and of the low-poly result at the chosen triangle budget](\u002Fmedia\u002Fassetbake-wire.webp)\n\n![The same AI model at different triangle budgets: the shape stays while the triangle count drops](\u002Fmedia\u002Fassetbake-budget.webp)\n\n## New UVs on the new mesh\n\nThe low-poly mesh gets its own UV layout, so the baked textures have room and no stretched islands from the original.\n\n![New UV layout of the low-poly asset next to the textured result](\u002Fmedia\u002Fassetbake-uv.webp)\n\n## Textures that match\n\nThe look of the original is baked onto the new mesh: normal map, base colour, and one ORM texture with AO, roughness and metallic. Metal keeps its colour. Emission and alpha are baked when the model has them.\n\n![Baked texture set on the low-poly asset: normal map, base colour and the ORM texture](\u002Fmedia\u002Fassetbake-maps.webp)\n\n## Blender stays yours\n\nThe job runs in a background process with a progress bar and Cancel. Your original is hidden, never changed. One undo removes the result.\n\n![Blender stays usable while AssetBake works on the asset in the background, with a progress bar and Cancel](\u002Fmedia\u002Fassetbake-background.webp)\n\n## How it works\n\n1. **Select** your model in Blender and open the AssetBake tab (press N).\n2. **Choose** a triangle budget and texture size, then press **Make Game Asset**.\n3. **Export** a GLB for Unity, Unreal Engine, Godot or the web.\n\nEvery control is described in the [panel reference](\u002Fdocs\u002Fassetbake\u002Fpanel). Installation is on the [install page](\u002Fdocs\u002Fassetbake\u002Finstall).\n\n## Game mode and Quad-dominant\n\nGame mode gives a triangle mesh on every platform. Quad-dominant keeps quads on thick parts and triangles on thin parts, for assets you will edit or rig. It runs on macOS (Apple Silicon) and Windows (x86-64). It is not retopology.\n\n![Quad-dominant mode: quads on the body of the asset, triangles on thin parts](\u002Fmedia\u002Fassetbake-quads.webp)\n\n## Lite and full version\n\n| | Lite (free) | Full |\n|---|---|---|\n| Game mode (triangles) | yes | yes |\n| Quad-dominant mode | no | yes |\n| Triangle budget | 1,000 \u002F 2,000 \u002F 5,000 | 2,000 to 50,000 presets, Custom 200 to 1,000,000 |\n| Texture size | 1k | 1k, 2k, 4k |\n| Maps | Normal, Base Colour, AO | Normal, Base Colour, Roughness, Metallic, Emission, Alpha, AO |\n| Scope | One asset for the selection | One asset for the selection, or one asset per part |\n| Normal map for export | OpenGL | OpenGL or DirectX |\n| Background job, Cancel, Remove hidden surface, Select Source, GLB export, Also save textures | yes | yes |\n| Where | GitHub, Blendkit | Gumroad, Superhive (listing in review). Blendkit: Game-mode build |\n\n## Compatibility\n\nBlender 4.2 LTS, 4.5 LTS and 5.2. macOS (Apple Silicon) and Windows (x86-64), Game and Quad-dominant on both. Linux: not confirmed yet. Intel Mac: not supported yet. AssetBake Lite was tested on macOS and Linux (x86-64), not on Windows. GLB checked in Godot 4; guides for Unity, Unreal Engine 5 and three.js are in the [documentation](\u002Fdocs\u002Fassetbake).\n\n## FAQ\n\n**Does it change my original model?** No. It is hidden, never modified. Select Source brings it back.\n\n**Is this retopology?** No. Game mode makes a triangle mesh at your budget. Quad-dominant makes mostly quads on thick parts and triangles on thin parts.\n\n**Does it keep my rig or animation?** No. You get a static asset in the rest pose.\n\n**Does it work on Windows?** Yes, on Windows (x86-64), with Game and Quad-dominant mode. AssetBake Lite is not tested on Windows. Intel Mac is not supported yet.\n\n**How long does it take?** Usually 10 seconds to 1 minute at 2k textures. A 1.7 million triangle source took about 45 seconds at 1k textures on Apple Silicon.\n\n**Which engines?** Any that reads GLB: Unity, Unreal Engine 5, Godot 4, three.js. Use DirectX normals for Unreal.\n\n**Can I try it free?** Yes: [AssetBake Lite on GitHub](https:\u002F\u002Fgithub.com\u002Fmendbox\u002Fassetbake-lite) and on Blendkit. Lite is not tested on Windows.\n\n**Can I use the result commercially?** AssetBake adds no restrictions. Check the terms of your source model and the AI service that made it.\n\n## How to buy\n\nAssetBake costs $18 at launch, $24 later. Buy it on [Gumroad](https:\u002F\u002Fmendbox.gumroad.com\u002Fl\u002Fassetbake?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=assetbake) or [BlendKit](https:\u002F\u002Fwww.blendkit.com\u002Fasset-gallery-detail\u002Fc85a3662-5ba0-46c1-b3e7-061d966226bf\u002F?utm_source=mendboxstudio&utm_medium=addon-page&utm_campaign=assetbake). The Superhive listing is in review and will be linked here once it is live. Questions go to support@mendboxstudio.com, with a reply within 24 hours. Built and tested by Pavel at Mendbox Studio ([about](\u002Fabout)).\n\nAfter purchase, follow the [install steps](\u002Fdocs\u002Fassetbake\u002Finstall), then open the [documentation overview](\u002Fdocs\u002Fassetbake). The [version history](\u002Fdocs\u002Fassetbake#version-history) lists what each version changed.\n",{"title":1713,"description":2082},"released","addons\u002Fassetbake","0.2.6","\u002Fmedia\u002Fassetbake.mp4",null,"HgDRM5yeZ7s0jFlTV8M_i8uB6kzM-etUMJi4mCbsjOk",1795260153994]