BedSplit documentation
BedSplit documentation
Documentation for BedSplit, the Blender add-on that splits a model to fit your 3D printer bed: dowel sockets, mesh repair, STL export and the version history.
What BedSplit is
BedSplit is a Blender 4.2+ extension that takes a mesh that is too big for your 3D printer and turns it into closed parts that each fit the build volume. It places flat cuts, drills round dowel sockets into the joints, repairs the mesh first, lays every part flat and exports one STL per part. The product overview is on the BedSplit page.
The idea in five steps
- Select your model in Object Mode and open the BedSplit tab in the sidebar.
- Choose your printer, or type a custom bed size.
- Optionally turn on Resize for print and type the real longest side in millimetres.
- Optionally press Find Cuts and move, add or remove cut planes.
- Press Split to Bed, check the Result panel, then Export STL.
Documentation pages
- Install: installing from disk, where the panel appears, updating, uninstalling, Lite versus the full version.
- Panel reference: every control, its default and its range, plus the printer preset table.
- Workflows: fitting a figure to a 220 mm bed, choosing cuts, adding dowels, exporting and assembling.
- Troubleshooting: non-manifold meshes, wrong scale, parts that are still too big, dowels in thin walls and more.
- Version history: what each release contained.
Good to know before you start
- The model must be a mesh object. If an imported file puts the mesh under an empty parent, BedSplit finds the only mesh selected, or the only mesh under the active object.
- The original is never changed. The parts are new objects in a collection named after the source.
- Everything is done in millimetres. The cutting positions you see are millimetres from the start of the model along each axis.
Version history
0.1.3 (13 November 2026)
The first public release, tagged v0.1.3 and sold on Gumroad. It needs Blender 4.2.0 or newer. It contains:
- 18 printer presets and a custom bed size.
- Resize for print.
- Split to Bed with automatic cut planes along X, Y and Z.
- Find Cuts, with planes drawn in the viewport, editable positions, Add Cut and Remove Cut.
- Round dowel sockets with settings for diameter, depth, clearance and dowels per joint.
- Repair of holes, flipped normals, overlapping shells and non-manifold geometry before cutting.
- Parts laid flat beside the source, and a Result panel with size and checks per part.
- Export of one STL per part and one dowel file.
The free BedSplit Lite covers flat cuts without dowels, repair or cut preview.
Related
- Product page: BedSplit
- Troubleshooting
- Guide: how to split a model for 3D printing, manual method first, then the add-on