BedSplit panel reference
Where everything is
All controls live in the BedSplit tab of the 3D Viewport sidebar (press N), in Object Mode. The tab has two panels: BedSplit (settings and the split button) and Result (what the last split produced and the export button). If no mesh is selected the top of the panel says "Select a mesh object".
Printer
| Control | What it does | Default and range |
|---|---|---|
| Printer (dropdown) | Chooses the build volume. Each entry shows its name and width × depth × height in millimetres. | Creality Ender 3 / V3 SE (220 × 220 × 250) |
| Custom size | Last entry of the dropdown. Shows the Bed fields so you can type your own size. | Off |
| Bed | Width, depth and print height in millimetres. Visible only with Custom size. | 220, 220, 250. Minimum 40 each |
| Bed: ... mm | Read-only line that repeats the size in use. |
Changing the printer or the bed size clears the cut list, so the cuts are found again for the new bed.
Printer presets
| Printer | Width × depth × height, mm |
|---|---|
| Bambu Lab A1 mini | 180 × 180 × 180 |
| Bambu Lab A1 / P1 / X1 | 256 × 256 × 256 |
| Bambu Lab H2D | 350 × 320 × 325 |
| Prusa MINI+ | 180 × 180 × 180 |
| Prusa MK4 / MK3 | 250 × 210 × 220 |
| Prusa XL | 360 × 360 × 360 |
| Prusa CORE One | 250 × 220 × 270 |
| Creality Ender 3 / V3 SE | 220 × 220 × 250 |
| Creality K1 | 220 × 220 × 250 |
| Creality K1 Max | 300 × 300 × 300 |
| Creality Ender 5 Plus | 350 × 350 × 400 |
| Anycubic Kobra 2 | 220 × 220 × 250 |
| Anycubic Kobra 3 | 250 × 250 × 260 |
| Elegoo Neptune 4 | 225 × 225 × 265 |
| Elegoo Neptune 4 Max | 420 × 420 × 480 |
| Sovol SV06 | 220 × 220 × 250 |
| Voron 2.4 300 | 300 × 300 × 280 |
| Voron 0.2 | 120 × 120 × 120 |
The presets are the nominal build volumes. If your machine has a smaller usable area, choose Custom size and type a smaller bed.
Model size
| Control | What it does | Default and range |
|---|---|---|
| Now: ... mm longest side | Read-only. The longest side of the selected object, taken from its dimensions and the scene unit scale. | |
| Resize for print | Off: the model is printed at its current size (scene unit scale applied). On: the parts are scaled so the longest side of the whole model has the size below. | Off |
| Longest side, mm | Printed size of the longest side of the whole model. Greyed out unless Resize for print is on. | 400. Minimum 10 |
Changing either control clears the cut list.
Cuts
| Control | What it does | Default and range |
|---|---|---|
| Find Cuts | Places the cut planes automatically for the chosen printer and draws them in the viewport. Reports how many cuts were found, or that the model fits the bed and no cut is needed. | |
| Show cuts in viewport | Shows or hides the planes in the viewport. Appears once a cut list exists. | On |
| Cut row: axis, position, X | One row per plane. The label is X, Y or Z. The number is the distance in millimetres from the start of the model along that axis. The X button removes the plane. | Position 0 or more |
| Add cut: X Y Z | Adds a plane across that axis in the middle of the largest remaining piece. |
Status lines in this box:
- Automatic: no cut list yet. Split to Bed will find the cuts itself.
- No cuts: model fits the bed: the automatic search found nothing to cut.
Rules worth knowing:
- Planes closer than 0.5 mm to an end of the model, or within 0.5 mm of another plane on the same axis, are ignored.
- The list belongs to one object at one position and size. If you move, rotate or scale the object, or change the size settings, the list is dropped and the panel returns to Automatic.
- When a cut list exists, Split to Bed uses exactly that list. Moving a plane while it is hidden shows it again.
- A manual cut list is not checked against the bed. The Result panel tells you afterwards if a part is still too big.
Dowels
| Control | What it does | Default and range |
|---|---|---|
| Dowel diameter, mm | Diameter of the dowel. | 6.0, range 2 to 20 |
| Depth in each part, mm | How far the dowel goes into each part. The dowel is twice this long. | 6.0, range 2 to 30 |
| Clearance, mm | Gap between dowel and socket. 0.2 suits most printers. Raise it when the dowels do not go in. | 0.2, range 0 to 1 |
| Dowels per joint | The largest number of dowels placed on one cut face. | 2, range 1 to 3 |
How the sockets are placed:
- The socket is as wide as the dowel plus the clearance on every side, and as deep as the depth plus the clearance.
- At least 1.6 mm of material must remain around a socket in both parts. With the default dowel that means a section roughly 10 mm across; thinner walls get no dowel.
- Dowels on the same joint are kept at least three dowel diameters apart.
- Every separate patch of a cut face is treated on its own, so a joint with two limbs can get dowels in both.
Split to Bed
The large button at the bottom of the BedSplit panel. It:
- Reads the mesh (including modifiers) in world axes, scaled to millimetres.
- Repairs it if needed.
- Cuts it along the cut list, or along automatically chosen planes.
- Adds sockets and checks every part.
- Turns each part so its largest cut face lies on the ground that still fits the bed, and places the parts in a square grid beside the model with a 15 mm gap.
The result is a collection named "BedSplit - " followed by the source name. Parts are named like "Knight part 01" and each has its own colour, repeated after eight. All dowels are one extra object named like "Knight dowel x6", where the number is how many to print. The original model is unchanged and stays active. The parts are selected. The cuts are hidden after the split. A new split of the same source replaces the previous collection. Undo removes the split.
The button is available only in Object Mode with a mesh. If the model already fits the bed and there are no cuts, you get "the model fits the bed, nothing to split. Add a cut to split it anyway".
Result panel
The title shows the add-on version. Before any split it says "No result yet". After a split it shows:
| Line | Meaning |
|---|---|
| N parts, M dowels | Count of parts and of dowels to print. A check mark means the parts are closed and fit the bed. |
| Source name and seconds | Which object was split and how long it took. |
| Messages | What was repaired and what needs attention (see below). |
| Part n: W × D × H mm | One row per part, with a check mark when it fits the bed and is closed. |
| Export STL | Opens a folder chooser. |
Possible messages:
| Message | Meaning |
|---|---|
| Repaired: holes closed, normals fixed | Light repair was enough. |
| Repaired: overlapping shells joined | Several overlapping shells were merged into one solid. |
| Repaired: surface rebuilt (within x mm) | The surface was rebuilt. The detail stayed within x mm. |
| Heavy repair: surface rebuilt, fine detail smoothed (x mm) | The rebuild moved the surface by more than 0.5 mm for 99 percent of it. Check the result. |
| N part(s) not watertight: move a cut plane and split again | See troubleshooting. |
| N part(s) larger than the bed: add a cut plane | See troubleshooting. |
| N joint(s) without dowel (wall too thin): glue these | Those joints are flat cuts only. |
| A dowel socket came out wrong: check the joints | Inspect the sockets before printing. |
Export STL
Saves every part of the last split as a binary STL in millimetres, plus one dowel file. File names come from the object names, with spaces and unusual characters replaced by underscores, so the dowel file keeps its count, for example "Knight_dowel_x6.stl". The button needs a result in the scene. If you cancel the folder chooser or leave it empty you get "choose a folder". The folder is created if it does not exist.
For use of these controls in order, see the workflows.
Related
- Product page: BedSplit
- Troubleshooting
- Guide: how to split a model for 3D printing